On 24/03/2023 12:09, Shenghao Ding wrote:
Create tas2781.yaml for tas2781 driver.
Signed-off-by: Shenghao Ding 13916275206@139.com
Where is the driver? Why are you sending these separate? You already got comment about wrong threading, so I really expect some improvements.
Changes in v6:
- Remove all the "|" after "description:".
- Drop the reset-gpios description.
- Be consistent on the I2C.
Changes to be committed: new file: Documentation/devicetree/bindings/sound/ti,tas2781.yaml
.../devicetree/bindings/sound/ti,tas2781.yaml | 84 +++++++++++++++++++ 1 file changed, 84 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml
diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml new file mode 100644 index 000000000000..af37595f3a6e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 - 2023 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Texas Instruments TAS2781 SmartAMP
+maintainers:
- Shenghao Ding shenghao-ding@ti.com
- Kevin Lu kevin-lu@ti.com
+description:
- The TAS2781 is a mono, digital input Class-D audio amplifier
- optimized for efficiently driving high peak power into small
- loudspeakers. Integrated an on-chip DSP supports Texas Instruments
- Smart Amp speaker protection algorithm. The integrated speaker
- voltage and current sense provides for real time
- monitoring of loudspeaker behavior.
+properties:
- compatible:
- enum:
- ti,tas2781- reg:
- maxItems: 1
- description:
I2C address of the primary device.
What happened here? Rob's comment seems ignored and now we have description without anything useful.
- reset-gpios:
- maxItems: 1
Best regards, Krzysztof