From: Vladimir Lypak vladimir.lypak@gmail.com
Add regs overrides for PM8953 codec.
Signed-off-by: Vladimir Lypak vladimir.lypak@gmail.com [Adam: rename codec] Signed-off-by: Adam Skladowski a39.skl@gmail.com --- sound/soc/codecs/msm8916-wcd-analog.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c index 13df60409857..b9325290c28d 100644 --- a/sound/soc/codecs/msm8916-wcd-analog.c +++ b/sound/soc/codecs/msm8916-wcd-analog.c @@ -755,6 +755,34 @@ static const struct wcd_reg_seq pm8950_data = { .seq_size = ARRAY_SIZE(wcd_reg_defaults_pm8950), };
+static const struct reg_default wcd_reg_defaults_pm8953[] = { + {CDC_A_RX_COM_OCP_CTL, 0xd1}, + {CDC_A_RX_COM_OCP_COUNT, 0xff}, + {CDC_D_SEC_ACCESS, 0xa5}, + {CDC_D_PERPH_RESET_CTL3, 0x0f}, + {CDC_A_TX_1_2_OPAMP_BIAS, 0x4c}, + {CDC_A_NCP_FBCTRL, 0xa8}, + {CDC_A_NCP_VCTRL, 0xa4}, + {CDC_A_SPKR_DRV_CTL, 0x69}, + {CDC_A_SPKR_DRV_DBG, 0x01}, + {CDC_A_SEC_ACCESS, 0xa5}, + {CDC_A_PERPH_RESET_CTL3, 0x0f}, + {CDC_A_CURRENT_LIMIT, 0xa2}, + {CDC_A_BYPASS_MODE, 0x18}, + {CDC_A_SPKR_ANA_BIAS_SET, 0x41}, + {CDC_A_SPKR_DAC_CTL, 0x03}, + {CDC_A_SPKR_OCP_CTL, 0xe1}, + {CDC_A_RX_HPH_BIAS_PA, 0xfa}, + {CDC_A_RX_EAR_STATUS, 0x10}, + {CDC_A_MASTER_BIAS_CTL, 0x30}, + {CDC_A_MICB_1_INT_RBIAS, 0x00}, +}; + +static const struct wcd_reg_seq pm8953_data = { + .seq = wcd_reg_defaults_pm8953, + .seq_size = ARRAY_SIZE(wcd_reg_defaults_pm8953), +}; + static int pm8916_wcd_analog_probe(struct snd_soc_component *component) { struct pm8916_wcd_analog_priv *priv = dev_get_drvdata(component->dev); @@ -1304,6 +1332,7 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev) static const struct of_device_id pm8916_wcd_analog_spmi_match_table[] = { { .compatible = "qcom,pm8916-wcd-analog-codec", .data = &pm8916_data }, { .compatible = "qcom,pm8950-wcd-analog-codec", .data = &pm8950_data }, + { .compatible = "qcom,pm8953-wcd-analog-codec", .data = &pm8953_data }, { } };