This patch adds controls to set following ALC parameters, - Max gain, Min gain, Noise gain, Attack rate, Release rate and delay
It also adds a switch to enable/disable noise suppression.
As per DA7210 data sheet, ALC and noise suppression can be enabled only if certain conditions are met. This condition checks are handled by simply using "_EXT" version of controls to capture change events.
Signed-off-by: Ashish Chavan ashish.chavan@kpitcummins.com Signed-off-by: David Dajun Chen dchen@diasemi.com --- Changes since v1: - Reading from register instead of cache - Made debug message more specific about error - Changed "Gain" to "Volume" in names of ALC controls --- sound/soc/codecs/da7210.c | 109 +++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 109 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c index cac4f26..0871ebc 100644 --- a/sound/soc/codecs/da7210.c +++ b/sound/soc/codecs/da7210.c @@ -26,11 +26,15 @@ #include <sound/tlv.h>
/* DA7210 register space */ +#define DA7210_CONTROL 0x01 #define DA7210_STATUS 0x02 #define DA7210_STARTUP1 0x03 #define DA7210_MIC_L 0x07 #define DA7210_MIC_R 0x08 +#define DA7210_AUX1_L 0x09 +#define DA7210_AUX1_R 0x0A #define DA7210_AUX2 0x0B +#define DA7210_IN_GAIN 0x0C #define DA7210_INMIX_L 0x0D #define DA7210_INMIX_R 0x0E #define DA7210_ADC_HPF 0x0F @@ -59,6 +63,12 @@ #define DA7210_PLL_DIV2 0x2A #define DA7210_PLL_DIV3 0x2B #define DA7210_PLL 0x2C +#define DA7210_ALC_MAX 0x83 +#define DA7210_ALC_MIN 0x84 +#define DA7210_ALC_NOIS 0x85 +#define DA7210_ALC_ATT 0x86 +#define DA7210_ALC_REL 0x87 +#define DA7210_ALC_DEL 0x88 #define DA7210_A_HID_UNLOCK 0x8A #define DA7210_A_TEST_UNLOCK 0x8B #define DA7210_A_PLL1 0x90 @@ -81,6 +91,7 @@ #define DA7210_IN_R_EN (1 << 7)
/* ADC bit fields */ +#define DA7210_ADC_ALC_EN (1 << 0) #define DA7210_ADC_L_EN (1 << 3) #define DA7210_ADC_R_EN (1 << 7)
@@ -150,6 +161,29 @@ /* SOFTMUTE bit fields */ #define DA7210_RAMP_EN (1 << 6)
+/* CONTROL bit fields */ +#define DA7210_NOISE_SUP_EN (1 << 3) + +/* IN_GAIN bit fields */ +#define DA7210_INPGA_L_VOL (0x0F << 0) +#define DA7210_INPGA_R_VOL (0xF0 << 0) + +/* ZERO_CROSS bit fields */ +#define DA7210_AUX1_L_ZC (1 << 0) +#define DA7210_AUX1_R_ZC (1 << 1) +#define DA7210_HP_L_ZC (1 << 6) +#define DA7210_HP_R_ZC (1 << 7) + +/* AUX1_L bit fields */ +#define DA7210_AUX1_L_VOL (0x3F << 0) + +/* AUX1_R bit fields */ +#define DA7210_AUX1_R_VOL (0x3F << 0) + +/* Minimum INPGA and AUX1 volume to enable noise suppression */ +#define DA7210_INPGA_MIN_VOL_NS 0x0A /* 10.5dB */ +#define DA7210_AUX1_MIN_VOL_NS 0x35 /* 6dB */ + #define DA7210_VERSION "0.0.1"
/* @@ -202,6 +236,68 @@ static const char *da7210_hp_mode_txt[] = { static const struct soc_enum da7210_hp_mode_sel = SOC_ENUM_SINGLE(DA7210_HP_CFG, 0, 2, da7210_hp_mode_txt);
+/* ALC can be enabled only if noise suppression is disabled */ +static int da7210_put_alc_sw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + + if (ucontrol->value.integer.value[0]) { + /* Check if noise suppression is enabled */ + if (snd_soc_read(codec, DA7210_CONTROL) & DA7210_NOISE_SUP_EN) { + dev_dbg(codec->dev, + "Disable noise suppression to enable ALC\n"); + return -EPERM; + } + } + /* If all conditions are met or we are actually disabling ALC */ + return snd_soc_put_volsw(kcontrol, ucontrol); +} + +/* Noise suppression can be enabled only if following conditions are met + * ALC disabled + * ZC enabled for HP and AUX1 PGA + * INPGA_L_VOL and INPGA_R_VOL >= 10.5 dB + * AUX1_L_VOL and AUX1_R_VOL >= 6 dB + */ +static int da7210_put_noise_sup_sw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + u8 val; + + if (ucontrol->value.integer.value[0]) { + /* Check if ALC is enabled */ + if (snd_soc_read(codec, DA7210_ADC) & DA7210_ADC_ALC_EN) + goto err; + + /* Check ZC for HP and AUX1 PGA */ + if ((snd_soc_read(codec, DA7210_ZERO_CROSS) & + (DA7210_AUX1_L_ZC | DA7210_AUX1_R_ZC | DA7210_HP_L_ZC | + DA7210_HP_R_ZC)) != 0xc3) + goto err; + + /* Check INPGA_L_VOL and INPGA_R_VOL */ + val = snd_soc_read(codec, DA7210_IN_GAIN); + if (((val & DA7210_INPGA_L_VOL) < DA7210_INPGA_MIN_VOL_NS) || + (((val & DA7210_INPGA_R_VOL) >> 4) < + DA7210_INPGA_MIN_VOL_NS)) + goto err; + + /* Check AUX1_L_VOL and AUX1_R_VOL */ + if (((snd_soc_read(codec, DA7210_AUX1_L) & DA7210_AUX1_L_VOL) < + DA7210_AUX1_MIN_VOL_NS) || + ((snd_soc_read(codec, DA7210_AUX1_R) & DA7210_AUX1_R_VOL) < + DA7210_AUX1_MIN_VOL_NS)) + goto err; + } + /* If all conditions are met or we are actually disabling Noise sup */ + return snd_soc_put_volsw(kcontrol, ucontrol); + +err: + return -EPERM; +} + static const struct snd_kcontrol_new da7210_snd_controls[] = {
SOC_DOUBLE_R_TLV("HeadPhone Playback Volume", @@ -261,6 +357,19 @@ static const struct snd_kcontrol_new da7210_snd_controls[] = { SOC_DOUBLE("Headphone ZC Switch", DA7210_ZERO_CROSS, 6, 7, 1, 0),
SOC_ENUM("Headphone Class", da7210_hp_mode_sel), + + /* ALC controls */ + SOC_SINGLE_EXT("ALC Enable Switch", DA7210_ADC, 0, 1, 0, + snd_soc_get_volsw, da7210_put_alc_sw), + SOC_SINGLE("ALC Capture Max Volume", DA7210_ALC_MAX, 0, 0x3F, 0), + SOC_SINGLE("ALC Capture Min Volume", DA7210_ALC_MIN, 0, 0x3F, 0), + SOC_SINGLE("ALC Capture Noise Volume", DA7210_ALC_NOIS, 0, 0x3F, 0), + SOC_SINGLE("ALC Capture Attack Rate", DA7210_ALC_ATT, 0, 0xFF, 0), + SOC_SINGLE("ALC Capture Release Rate", DA7210_ALC_REL, 0, 0xFF, 0), + SOC_SINGLE("ALC Capture Release Delay", DA7210_ALC_DEL, 0, 0xFF, 0), + + SOC_SINGLE_EXT("Noise Suppression Enable Switch", DA7210_CONTROL, 3, 1, + 0, snd_soc_get_volsw, da7210_put_noise_sup_sw), };
/* Codec private data */