The recent bug report suggests that BCLK setup for i915 HSW/BDW needs to be updated at each HDMI hotplug, not only at initialization and resume. That is, we need to update HSW_EM4 and HSW_EM5 registers at ELD notification, too. Otherwise the HDMI audio may be out of sync and played in a wrong pitch.
However, the HDA codec driver has no access to the controller registers, and currently the code managing these registers is in hda_intel.c, i.e. local to the controller driver. For allowing the explicit BCLK update from the codec driver, as in this patch, the former haswell_set_bclk() in hda_intel.c is moved to hdac_i915.c and exposed as snd_hdac_i915_set_bclk(). This is called from both the HDA controller driver and intel_pin_eld_notify() in HDMI codec driver.
Along with this change, snd_hdac_get_display_clk() gets dropped as it's no longer used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91410 Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Takashi Iwai tiwai@suse.de --- include/sound/hda_i915.h | 5 ++-- sound/hda/hdac_i915.c | 62 +++++++++++++++++++++++++++++++++++++++++++++- sound/pci/hda/hda_intel.c | 56 +++-------------------------------------- sound/pci/hda/patch_hdmi.c | 1 + 4 files changed, 68 insertions(+), 56 deletions(-)
diff --git a/include/sound/hda_i915.h b/include/sound/hda_i915.h index fa341fcb5829..f5842bcd9c94 100644 --- a/include/sound/hda_i915.h +++ b/include/sound/hda_i915.h @@ -9,7 +9,7 @@ #ifdef CONFIG_SND_HDA_I915 int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable); int snd_hdac_display_power(struct hdac_bus *bus, bool enable); -int snd_hdac_get_display_clk(struct hdac_bus *bus); +void snd_hdac_i915_set_bclk(struct hdac_bus *bus); int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid, int rate); int snd_hdac_acomp_get_eld(struct hdac_bus *bus, hda_nid_t nid, bool *audio_enabled, char *buffer, int max_bytes); @@ -25,9 +25,8 @@ static inline int snd_hdac_display_power(struct hdac_bus *bus, bool enable) { return 0; } -static inline int snd_hdac_get_display_clk(struct hdac_bus *bus) +static inline void snd_hdac_i915_set_bclk(struct hdac_bus *bus) { - return 0; } static inline int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid, int rate) diff --git a/sound/hda/hdac_i915.c b/sound/hda/hdac_i915.c index 54babe1c0b16..181777b43aa1 100644 --- a/sound/hda/hdac_i915.c +++ b/sound/hda/hdac_i915.c @@ -20,6 +20,7 @@ #include <sound/core.h> #include <sound/hdaudio.h> #include <sound/hda_i915.h> +#include <sound/hda_register.h>
static struct i915_audio_component *hdac_acomp;
@@ -116,7 +117,66 @@ int snd_hdac_get_display_clk(struct hdac_bus *bus)
return acomp->ops->get_cdclk_freq(acomp->dev); } -EXPORT_SYMBOL_GPL(snd_hdac_get_display_clk); + +#define CONTROLLER_IN_GPU(pci) (((pci)->device == 0x0a0c) || \ + ((pci)->device == 0x0c0c) || \ + ((pci)->device == 0x0d0c) || \ + ((pci)->device == 0x160c)) + +/** + * snd_hdac_i915_set_bclk - Reprogram BCLK for HSW/BDW + * @bus: HDA core bus + * + * Intel HSW/BDW display HDA controller is in GPU. Both its power and link BCLK + * depends on GPU. Two Extended Mode registers EM4 (M value) and EM5 (N Value) + * are used to convert CDClk (Core Display Clock) to 24MHz BCLK: + * BCLK = CDCLK * M / N + * The values will be lost when the display power well is disabled and need to + * be restored to avoid abnormal playback speed. + * + * Call this function at initializing and changing power well, as well as + * at ELD notifier for the hotplug. + */ +void snd_hdac_i915_set_bclk(struct hdac_bus *bus) +{ + struct i915_audio_component *acomp = bus->audio_component; + struct pci_dev *pci = to_pci_dev(bus->dev); + int cdclk_freq; + unsigned int bclk_m, bclk_n; + + if (!acomp || !acomp->ops || !acomp->ops->get_cdclk_freq) + return; /* only for i915 binding */ + if (!CONTROLLER_IN_GPU(pci)) + return; /* only HSW/BDW */ + + cdclk_freq = acomp->ops->get_cdclk_freq(acomp->dev); + switch (cdclk_freq) { + case 337500: + bclk_m = 16; + bclk_n = 225; + break; + + case 450000: + default: /* default CDCLK 450MHz */ + bclk_m = 4; + bclk_n = 75; + break; + + case 540000: + bclk_m = 4; + bclk_n = 90; + break; + + case 675000: + bclk_m = 8; + bclk_n = 225; + break; + } + + snd_hdac_chip_writew(bus, HSW_EM4, bclk_m); + snd_hdac_chip_writew(bus, HSW_EM5, bclk_n); +} +EXPORT_SYMBOL_GPL(snd_hdac_i915_set_bclk);
/* There is a fixed mapping between audio pin node and display port * on current Intel platforms: diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 637b8a0e2a91..9a0d1445ca5c 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -857,50 +857,6 @@ static int param_set_xint(const char *val, const struct kernel_param *kp) #define azx_del_card_list(chip) /* NOP */ #endif /* CONFIG_PM */
-/* Intel HSW/BDW display HDA controller is in GPU. Both its power and link BCLK - * depends on GPU. Two Extended Mode registers EM4 (M value) and EM5 (N Value) - * are used to convert CDClk (Core Display Clock) to 24MHz BCLK: - * BCLK = CDCLK * M / N - * The values will be lost when the display power well is disabled and need to - * be restored to avoid abnormal playback speed. - */ -static void haswell_set_bclk(struct hda_intel *hda) -{ - struct azx *chip = &hda->chip; - int cdclk_freq; - unsigned int bclk_m, bclk_n; - - if (!hda->need_i915_power) - return; - - cdclk_freq = snd_hdac_get_display_clk(azx_bus(chip)); - switch (cdclk_freq) { - case 337500: - bclk_m = 16; - bclk_n = 225; - break; - - case 450000: - default: /* default CDCLK 450MHz */ - bclk_m = 4; - bclk_n = 75; - break; - - case 540000: - bclk_m = 4; - bclk_n = 90; - break; - - case 675000: - bclk_m = 8; - bclk_n = 225; - break; - } - - azx_writew(chip, HSW_EM4, bclk_m); - azx_writew(chip, HSW_EM5, bclk_n); -} - #if defined(CONFIG_PM_SLEEP) || defined(SUPPORT_VGA_SWITCHEROO) /* * power management @@ -958,7 +914,7 @@ static int azx_resume(struct device *dev) if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL && hda->need_i915_power) { snd_hdac_display_power(azx_bus(chip), true); - haswell_set_bclk(hda); + snd_hdac_i915_set_bclk(azx_bus(chip)); } if (chip->msi) if (pci_enable_msi(pci) < 0) @@ -1058,7 +1014,7 @@ static int azx_runtime_resume(struct device *dev) bus = azx_bus(chip); if (hda->need_i915_power) { snd_hdac_display_power(bus, true); - haswell_set_bclk(hda); + snd_hdac_i915_set_bclk(bus); } else { /* toggle codec wakeup bit for STATESTS read */ snd_hdac_set_codec_wakeup(bus, true); @@ -1796,12 +1752,8 @@ static int azx_first_init(struct azx *chip) /* initialize chip */ azx_init_pci(chip);
- if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) { - struct hda_intel *hda; - - hda = container_of(chip, struct hda_intel, chip); - haswell_set_bclk(hda); - } + if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) + snd_hdac_i915_set_bclk(bus);
hda_intel_init_chip(chip, (probe_only[dev] & 2) == 0);
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 40933aa33afe..1483f85999ec 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -2232,6 +2232,7 @@ static void intel_pin_eld_notify(void *audio_ptr, int port) if (atomic_read(&(codec)->core.in_pm)) return;
+ snd_hdac_i915_set_bclk(&codec->bus->core); check_presence_and_report(codec, pin_nid); }