The set_sysclk() now is used to override the output bit clock rate. But this is not a common way to implement a set_dai_sysclk(). And this creates a problem when a general machine driver (simple-card for example) tries to do set_dai_sysclk() by passing an input clock rate for the baud clock instead of setting the bit clock rate as fsl_ssi driver expected.
So this patch solves this problem by firstly removing set_sysclk() since the hw_params() can calculate the bit clock rate. Secondly, in order not to break those TDM use cases which previously might have been using set_sysclk() to override the bit clock rate, this patch changes the driver to override it based on the slot number.
The patch also removes an obsolete comment of the dir parameter.
Signed-off-by: Nicolin Chen nicoleotsuka@gmail.com --- sound/soc/fsl/fsl_ssi.c | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 64598d1..3657c88 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -197,12 +197,12 @@ struct fsl_ssi_soc_data { * @use_dma: DMA is used or FIQ with stream filter * @use_dual_fifo: DMA with support for both FIFOs used * @fifo_deph: Depth of the SSI FIFOs + * @slots: number of slots * @rxtx_reg_val: Specific register settings for receive/transmit configuration * * @clk: SSI clock * @baudclk: SSI baud clock for master mode * @baudclk_streams: Active streams that are using baudclk - * @bitclk_freq: bitclock frequency set by .set_dai_sysclk * * @dma_params_tx: DMA transmit parameters * @dma_params_rx: DMA receive parameters @@ -233,12 +233,12 @@ struct fsl_ssi_private { bool use_dual_fifo; bool has_ipg_clk_name; unsigned int fifo_depth; + unsigned int slots; struct fsl_ssi_rxtx_reg_val rxtx_reg_val;
struct clk *clk; struct clk *baudclk; unsigned int baudclk_streams; - unsigned int bitclk_freq;
/* regcache for volatile regs */ u32 regcache_sfcsr; @@ -700,8 +700,7 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream, * Note: This function can be only called when using SSI as DAI master * * Quick instruction for parameters: - * freq: Output BCLK frequency = samplerate * 32 (fixed) * channels - * dir: SND_SOC_CLOCK_OUT -> TxBCLK, SND_SOC_CLOCK_IN -> RxBCLK. + * freq: Output BCLK frequency = samplerate * 32 (fixed) * slots (or channels) */ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, struct snd_soc_dai *cpu_dai, @@ -716,9 +715,9 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, unsigned int freq; bool baudclk_is_used;
- /* Prefer the explicitly set bitclock frequency */ - if (ssi_private->bitclk_freq) - freq = ssi_private->bitclk_freq; + /* Generate bit clock based on the slot or channel number */ + if (ssi_private->slots) + freq = ssi_private->slots * 32 * params_rate(hw_params); else freq = params_channels(hw_params) * 32 * params_rate(hw_params);
@@ -805,16 +804,6 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, return 0; }
-static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai); - - ssi_private->bitclk_freq = freq; - - return 0; -} - /** * fsl_ssi_hw_params - program the sample size * @@ -1121,6 +1110,8 @@ static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask,
regmap_update_bits(regs, CCSR_SSI_SCR, CCSR_SSI_SCR_SSIEN, val);
+ ssi_private->slots = slots; + return 0; }
@@ -1191,7 +1182,6 @@ static const struct snd_soc_dai_ops fsl_ssi_dai_ops = { .hw_params = fsl_ssi_hw_params, .hw_free = fsl_ssi_hw_free, .set_fmt = fsl_ssi_set_dai_fmt, - .set_sysclk = fsl_ssi_set_dai_sysclk, .set_tdm_slot = fsl_ssi_set_dai_tdm_slot, .trigger = fsl_ssi_trigger, };