On 5/30/22 07:54, Brent Lu wrote:
From: xliu xiang.liu@cirrus.com
The default mapping of ASPRX1 Slot is left channel. Map the slots of right amplifiers (WR and TR) to right channel.
Signed-off-by: xliu xiang.liu@cirrus.com Signed-off-by: Brent Lu brent.lu@intel.com
sound/soc/intel/boards/sof_cirrus_common.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/sound/soc/intel/boards/sof_cirrus_common.c b/sound/soc/intel/boards/sof_cirrus_common.c index e71d74ec1b0b..64ca0e3991dc 100644 --- a/sound/soc/intel/boards/sof_cirrus_common.c +++ b/sound/soc/intel/boards/sof_cirrus_common.c @@ -107,6 +107,7 @@ static int cs35l41_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); struct snd_soc_dai *codec_dai; int clk_freq, i, ret;
- int rx_ch[2] = {1, 0};
Should this be 'const'?
I am also not clear on the mapping, how does this select the right channel? This selects slot0 and the left channel, what am I missing?
clk_freq = sof_dai_get_bclk(rtd); /* BCLK freq */
@@ -134,6 +135,17 @@ static int cs35l41_hw_params(struct snd_pcm_substream *substream, ret); return ret; }
/* Setup for R channel Slot: WR and TR */if (i % 2) {ret = snd_soc_dai_set_channel_map(codec_dai, 0, NULL,ARRAY_SIZE(rx_ch), rx_ch);if (ret < 0) {dev_err(codec_dai->dev, "fail to set channel map, ret %d\n",ret);return ret;}}
Should we do this loop for the left channels as well to have an explicit setting?
}
return 0;