At Sat, 15 Nov 2014 14:01:21 +0100, Jurgen Kramer wrote:
This patch adds a USB control message delay quirk for a few specific Marantz/Denon devices. Without the delay the DACs will not work properly and produces the following type of messages:
Nov 15 10:09:21 orwell kernel: [ 91.342880] usb 3-13: clock source 41 is not valid, cannot use Nov 15 10:09:21 orwell kernel: [ 91.343775] usb 3-13: clock source 41 is not valid, cannot use
There are likely other Marantz/Denon devices using the same USB module which exhibit the same problems. But as this cannot be verified I limited the patch to the devices I could test.
The following two devices are covered by this path:
- Marantz SA-14S1
- Marantz HD-DAC1
Signed-off-by: Jurgen Kramer gtmkramer@xs4all.nl
Thanks, applied.
Takashi
sound/usb/quirks.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index d2aa45a..a5941f8 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1146,6 +1146,20 @@ void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe, if ((le16_to_cpu(dev->descriptor.idVendor) == 0x23ba) && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) mdelay(20);
- /* Marantz/Denon devices with USB DAC functionality need a delay
* after each class compliant request*/- if ((le16_to_cpu(dev->descriptor.idVendor) == 0x154e) &&
(requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) {switch (le16_to_cpu(dev->descriptor.idProduct)) {case 0x3005: /* Marantz HD-DAC1 */case 0x3006: /* Marantz SA-14S1 */mdelay(20);break;}- }
}
/*
1.9.3
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel