[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-1-mainline (root@HTPC) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Sun Dec 8 00:37:51 PST 2013 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=LABEL=ROOT rw rootfstype=btrfs raid=noautodetect intel_iommu=on radeon.audio=1 radeon.dpm=1 quiet add_efi_memmap clocksource=hpet hpet=enable splash [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df7dffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df7e0000-0x00000000df7e1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000df7e2000-0x00000000df7effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000df7f0000-0x00000000df7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. P55-UD3R/P55-UD3R, BIOS F8 06/23/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x420000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 100000000 mask F00000000 write-back [ 0.000000] 3 base 200000000 mask E00000000 write-back [ 0.000000] 4 base 300000000 mask F00000000 write-back [ 0.000000] 5 base 400000000 mask FE0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf7e0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f57d0-0x000f57df] mapped at [ffff8800000f57d0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE [ 0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE [ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41fe00000-0x41fffffff] [ 0.000000] [mem 0x41fe00000-0x41fffffff] page 2M [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41fdfffff] [ 0.000000] [mem 0x41c000000-0x41fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdf7dffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdf5fffff] page 2M [ 0.000000] [mem 0xdf600000-0xdf7dffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x37500000-0x37a77fff] [ 0.000000] ACPI: RSDP 00000000000f7190 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000df7e2040 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000df7e20c0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000df7e2180 006278 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000df7e0000 000040 [ 0.000000] ACPI: HPET 00000000df7e8540 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000df7e85c0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 00000000df7e8600 000560 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000df7e8b60 000A32 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000df7e8440 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000df7e95c0 001778 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fffffff] [ 0.000000] NODE_DATA [mem 0x41ffed000-0x41fff1fff] [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f600000-ffff88041f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xdf7dffff] [ 0.000000] node 0: [mem 0x100000000-0x41fffffff] [ 0.000000] On node 0 totalpages: 4192124 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14240 pages used for memmap [ 0.000000] DMA32 zone: 911328 pages, LIFO batch:31 [ 0.000000] Normal zone: 51200 pages used for memmap [ 0.000000] Normal zone: 3276800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf7e0000-0xdf7e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf7e2000-0xdf7effff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf7f0000-0xdf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xdf800000-0xf3ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041fc00000 s86272 r8192 d24320 u262144 [ 0.000000] pcpu-alloc: s86272 r8192 d24320 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4126599 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=LABEL=ROOT rw rootfstype=btrfs raid=noautodetect intel_iommu=on radeon.audio=1 radeon.dpm=1 quiet add_efi_memmap clocksource=hpet hpet=enable splash [ 0.000000] Intel-IOMMU: enabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16421832K/16768496K available (5151K kernel code, 815K rwdata, 1728K rodata, 1160K init, 1304K bss, 346664K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:8448 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.003333] tsc: Detected 2720.160 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5442.00 BogoMIPS (lpj=9067200) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000028] Security Framework initialized [ 0.000035] AppArmor: AppArmor disabled by boot time parameter [ 0.000036] Yama: becoming mindful. [ 0.001004] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.003918] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.005413] Mount-cache hash table entries: 256 [ 0.005574] Initializing cgroup subsys memory [ 0.005580] Initializing cgroup subsys devices [ 0.005582] Initializing cgroup subsys freezer [ 0.005583] Initializing cgroup subsys net_cls [ 0.005584] Initializing cgroup subsys blkio [ 0.005600] CPU: Physical Processor ID: 0 [ 0.005601] CPU: Processor Core ID: 0 [ 0.005605] mce: CPU supports 9 MCE banks [ 0.005613] CPU0: Thermal monitoring enabled (TM1) [ 0.005621] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 6 [ 0.005685] Freeing SMP alternatives memory: 20K (ffffffff819ef000 - ffffffff819f4000) [ 0.006579] ACPI: Core revision 20131115 [ 0.008725] ACPI: All ACPI Tables successfully acquired [ 0.011152] ftrace: allocating 20458 entries in 80 pages [ 0.020308] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.053272] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (fam: 06, model: 1e, stepping: 05) [ 0.157889] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver. [ 0.157894] perf_event_intel: CPU erratum AAJ80 worked around [ 0.157895] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.157897] ... version: 3 [ 0.157898] ... bit width: 48 [ 0.157898] ... generic registers: 4 [ 0.157899] ... value mask: 0000ffffffffffff [ 0.157900] ... max period: 000000007fffffff [ 0.157901] ... fixed-purpose events: 3 [ 0.157902] ... event mask: 000000070000000f [ 0.184591] x86: Booting SMP configuration: [ 0.197892] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.184593] .... node #0, CPUs: #1 #2 #3 [ 0.237765] x86: Booted up 1 node, 4 CPUs [ 0.237768] smpboot: Total of 4 processors activated (21769.00 BogoMIPS) [ 0.240222] devtmpfs: initialized [ 0.243276] PM: Registering ACPI NVS region [mem 0xdf7e0000-0xdf7e1fff] (8192 bytes) [ 0.244073] RTC time: 14:40:52, date: 12/08/13 [ 0.244106] NET: Registered protocol family 16 [ 0.244205] cpuidle: using governor ladder [ 0.244206] cpuidle: using governor menu [ 0.244233] ACPI: bus type PCI registered [ 0.244234] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.244287] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.244290] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.247553] PCI: Using configuration type 1 for base access [ 0.248188] bio: create slab at 0 [ 0.248273] ACPI: Added _OSI(Module Device) [ 0.248275] ACPI: Added _OSI(Processor Device) [ 0.248276] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.248277] ACPI: Added _OSI(Processor Aggregator Device) [ 0.251497] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x73, should be 0x72 (20131115/tbprint-214) [ 0.251970] ACPI: Interpreter enabled [ 0.251975] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.251978] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.251988] ACPI: (supports S0 S3 S4 S5) [ 0.251990] ACPI: Using IOAPIC for interrupt routing [ 0.252005] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.252099] ACPI: No dock devices found. [ 0.256469] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.256473] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.256479] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.256673] ACPI: \_SB_.PCI0.LNKA: can't evaluate _ADR (0x5) [ 0.256675] ACPI: \_SB_.PCI0.LNKB: can't evaluate _ADR (0x5) [ 0.256677] ACPI: \_SB_.PCI0.LNKC: can't evaluate _ADR (0x5) [ 0.256678] ACPI: \_SB_.PCI0.LNKD: can't evaluate _ADR (0x5) [ 0.256680] ACPI: \_SB_.PCI0.LNKE: can't evaluate _ADR (0x5) [ 0.256682] ACPI: \_SB_.PCI0.LNKF: can't evaluate _ADR (0x5) [ 0.256683] ACPI: \_SB_.PCI0.LNK0: can't evaluate _ADR (0x5) [ 0.256685] ACPI: \_SB_.PCI0.LNK1: can't evaluate _ADR (0x5) [ 0.256686] ACPI: \_SB_.PCI0.EXPL: can't evaluate _ADR (0x5) [ 0.256688] PCI host bridge to bus 0000:00 [ 0.256690] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.256691] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.256693] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.256694] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.256696] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.256698] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfebfffff] [ 0.256705] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000 [ 0.256793] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400 [ 0.256834] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.256897] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000 [ 0.256980] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000 [ 0.257062] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000 [ 0.257142] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000 [ 0.257219] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000 [ 0.257290] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000 [ 0.257375] pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300 [ 0.257414] pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f] [ 0.257482] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.257512] pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300 [ 0.257549] pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f] [ 0.257616] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.257644] pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300 [ 0.257682] pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f] [ 0.257748] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.257788] pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320 [ 0.257807] pci 0000:00:1a.7: reg 0x10: [mem 0xfbfff000-0xfbfff3ff] [ 0.257887] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.257928] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.257959] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.258019] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.258062] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.258092] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.258151] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.258193] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.258223] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400 [ 0.258283] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.258326] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.258357] pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300 [ 0.258395] pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f] [ 0.258462] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.258492] pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300 [ 0.258529] pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f] [ 0.258596] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.258626] pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300 [ 0.258663] pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f] [ 0.258731] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.258759] pci 0000:00:1d.3: [8086:3b39] type 00 class 0x0c0300 [ 0.258796] pci 0000:00:1d.3: reg 0x20: [io 0xf900-0xf91f] [ 0.258863] pci 0000:00:1d.3: System wakeup disabled by ACPI [ 0.258898] pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320 [ 0.258917] pci 0000:00:1d.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff] [ 0.258997] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.259038] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.259065] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.259141] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.259172] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100 [ 0.259327] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601 [ 0.259344] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807] [ 0.259350] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703] [ 0.259357] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607] [ 0.259364] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503] [ 0.259371] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf41f] [ 0.259378] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffd000-0xfbffd7ff] [ 0.259417] pci 0000:00:1f.2: PME# supported from D3hot [ 0.259480] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.259494] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit] [ 0.259512] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.259617] pci 0000:01:00.0: [1002:6818] type 00 class 0x030000 [ 0.259629] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.259637] pci 0000:01:00.0: reg 0x18: [mem 0xfbc80000-0xfbcbffff 64bit] [ 0.259643] pci 0000:01:00.0: reg 0x20: [io 0xce00-0xceff] [ 0.259654] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.259687] pci 0000:01:00.0: supports D1 D2 [ 0.259688] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.259734] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300 [ 0.259745] pci 0000:01:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff 64bit] [ 0.259799] pci 0000:01:00.1: supports D1 D2 [ 0.264455] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.264461] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.264465] pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.264471] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.264557] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185 [ 0.264640] pci 0000:02:00.0: reg 0x24: [mem 0xfbafe000-0xfbafffff] [ 0.264700] pci 0000:02:00.0: PME# supported from D3hot [ 0.264754] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185 [ 0.264774] pci 0000:02:00.1: reg 0x10: [io 0xbf00-0xbf07] [ 0.264784] pci 0000:02:00.1: reg 0x14: [io 0xbe00-0xbe03] [ 0.264793] pci 0000:02:00.1: reg 0x18: [io 0xbd00-0xbd07] [ 0.264803] pci 0000:02:00.1: reg 0x1c: [io 0xbc00-0xbc03] [ 0.264812] pci 0000:02:00.1: reg 0x20: [io 0xbb00-0xbb0f] [ 0.264906] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.264914] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.264918] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff] [ 0.264921] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 0.264984] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.264999] pci 0000:03:00.0: reg 0x10: [io 0xee00-0xeeff] [ 0.265025] pci 0000:03:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref] [ 0.265042] pci 0000:03:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref] [ 0.265053] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.265113] pci 0000:03:00.0: supports D1 D2 [ 0.265115] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.271119] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.271125] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.271130] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 0.271137] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.271223] pci 0000:04:00.0: [197b:2363] type 00 class 0x010185 [ 0.271305] pci 0000:04:00.0: reg 0x24: [mem 0xfbdfe000-0xfbdfffff] [ 0.271365] pci 0000:04:00.0: PME# supported from D3hot [ 0.271421] pci 0000:04:00.1: [197b:2363] type 00 class 0x010185 [ 0.271440] pci 0000:04:00.1: reg 0x10: [io 0xdf00-0xdf07] [ 0.271450] pci 0000:04:00.1: reg 0x14: [io 0xde00-0xde03] [ 0.271459] pci 0000:04:00.1: reg 0x18: [io 0xdd00-0xdd07] [ 0.271469] pci 0000:04:00.1: reg 0x1c: [io 0xdc00-0xdc03] [ 0.271478] pci 0000:04:00.1: reg 0x20: [io 0xdb00-0xdb0f] [ 0.271571] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.271580] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.271583] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.271586] pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.271631] pci 0000:05:05.0: [168c:0023] type 00 class 0x028000 [ 0.271649] pci 0000:05:05.0: reg 0x10: [mem 0xfbbf0000-0xfbbfffff] [ 0.271780] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.271785] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.271790] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.271792] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.271793] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.271795] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.271796] pci 0000:00:1e.0: bridge window [mem 0xdf800000-0xfebfffff] (subtractive decode) [ 0.272260] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.272305] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.272349] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.272393] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.272437] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.272480] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.272524] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.272568] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.272640] ACPI: \_SB_.PCI0: notify handler is installed [ 0.272672] Found 1 acpi root devices [ 0.272731] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.272733] vgaarb: loaded [ 0.272734] vgaarb: bridge control possible 0000:01:00.0 [ 0.272760] PCI: Using ACPI for IRQ routing [ 0.274015] PCI: Discovered peer bus 3f [ 0.274016] PCI: root bus 3f: using default resources [ 0.274017] PCI: Probing PCI hardware (bus 3f) [ 0.274035] PCI host bridge to bus 0000:3f [ 0.274037] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 0.274039] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff] [ 0.274041] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] [ 0.274043] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f]) [ 0.274047] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000 [ 0.274081] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000 [ 0.274115] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000 [ 0.274148] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000 [ 0.274180] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000 [ 0.274211] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000 [ 0.274243] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000 [ 0.274273] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000 [ 0.274303] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000 [ 0.274335] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000 [ 0.274366] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000 [ 0.274397] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000 [ 0.274428] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000 [ 0.274462] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000 [ 0.274494] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000 [ 0.274534] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f [ 0.274538] PCI: pci_cache_line_size set to 64 bytes [ 0.274613] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.274615] e820: reserve RAM buffer [mem 0xdf7e0000-0xdfffffff] [ 0.274684] NetLabel: Initializing [ 0.274685] NetLabel: domain hash size = 128 [ 0.274686] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.274697] NetLabel: unlabeled traffic allowed by default [ 0.274743] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.274749] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0 [ 0.274753] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.276786] hpet: hpet2 irq 40 for MSI [ 0.276822] hpet: hpet3 irq 41 for MSI [ 0.276860] hpet: hpet4 irq 42 for MSI [ 0.276900] hpet: hpet5 irq 43 for MSI [ 0.276923] Switched to clocksource hpet [ 0.280467] pnp: PnP ACPI init [ 0.280478] ACPI: bus type PNP registered [ 0.280607] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.280610] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.280611] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.280613] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.280615] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.280618] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.280627] pnp 00:01: [dma 4] [ 0.280644] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.280697] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.280731] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.280751] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.280774] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.280984] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.281148] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.281256] system 00:08: [io 0x0400-0x047f] could not be reserved [ 0.281259] system 00:08: [io 0x0580-0x05ff] has been reserved [ 0.281261] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.281417] system 00:09: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.281420] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.281554] system 00:0a: [mem 0x000f0000-0x000f3fff] could not be reserved [ 0.281557] system 00:0a: [mem 0x000f4000-0x000f7fff] could not be reserved [ 0.281559] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.281560] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.281562] system 00:0a: [mem 0xdf7e0000-0xdf7effff] could not be reserved [ 0.281564] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.281566] system 00:0a: [mem 0x00100000-0xdf7dffff] could not be reserved [ 0.281568] system 00:0a: [mem 0xdf7f0000-0xdf7fffff] has been reserved [ 0.281570] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.281571] system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.281573] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.281575] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.281577] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.281578] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved [ 0.281580] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved [ 0.281582] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.281612] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active) [ 0.281616] pnp: PnP ACPI: found 12 devices [ 0.281617] ACPI: bus type PNP unregistered [ 0.287979] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.287992] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 [ 0.288002] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.288004] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.288008] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf800000-0xdf9fffff 64bit pref] [ 0.288010] pci 0000:00:1c.3: BAR 15: assigned [mem 0xdfa00000-0xdfbfffff 64bit pref] [ 0.288013] pci 0000:01:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc1ffff pref] [ 0.288015] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.288017] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.288020] pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.288023] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.288027] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.288029] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff] [ 0.288033] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 0.288036] pci 0000:00:1c.0: bridge window [mem 0xdf800000-0xdf9fffff 64bit pref] [ 0.288041] pci 0000:03:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe1ffff pref] [ 0.288043] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.288045] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.288049] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 0.288052] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.288056] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.288058] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.288062] pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.288065] pci 0000:00:1c.3: bridge window [mem 0xdfa00000-0xdfbfffff 64bit pref] [ 0.288070] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.288074] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.288080] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.288082] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.288083] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.288085] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.288087] pci_bus 0000:00: resource 8 [mem 0xdf800000-0xfebfffff] [ 0.288088] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.288090] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.288091] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.288093] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.288094] pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff] [ 0.288096] pci_bus 0000:02: resource 2 [mem 0xdf800000-0xdf9fffff 64bit pref] [ 0.288098] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.288099] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfb9fffff] [ 0.288101] pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.288102] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.288104] pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.288105] pci_bus 0000:04: resource 2 [mem 0xdfa00000-0xdfbfffff 64bit pref] [ 0.288107] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.288108] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.288110] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.288111] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.288113] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.288115] pci_bus 0000:05: resource 8 [mem 0xdf800000-0xfebfffff] [ 0.288117] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] [ 0.288118] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff] [ 0.288142] NET: Registered protocol family 2 [ 0.288301] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.288651] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.288925] TCP: Hash tables configured (established 131072 bind 65536) [ 0.288944] TCP: reno registered [ 0.288960] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.289072] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.289219] NET: Registered protocol family 1 [ 0.313659] pci 0000:01:00.0: Boot video device [ 0.313690] PCI: CLS 64 bytes, default 64 [ 0.313727] Unpacking initramfs... [ 0.333879] Freeing initrd memory: 5600K (ffff880037500000 - ffff880037a78000) [ 0.333882] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.333884] software IO TLB [mem 0xdb7e0000-0xdf7e0000] (64MB) mapped at [ffff8800db7e0000-ffff8800df7dffff] [ 0.334045] Scanning for low memory corruption every 60 seconds [ 0.334293] audit: initializing netlink socket (disabled) [ 0.334302] type=2000 audit(1386513652.229:1): initialized [ 0.344916] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.346205] zbud: loaded [ 0.346353] VFS: Disk quotas dquot_6.5.2 [ 0.346386] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.346521] msgmni has been set to 32084 [ 0.346791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.346831] io scheduler noop registered [ 0.346833] io scheduler deadline registered [ 0.346862] io scheduler cfq registered (default) [ 0.347347] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.347358] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.347394] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 0.347395] vesafb: scrolling: redraw [ 0.347396] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.347821] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005b00000, using 8128k, total 8128k [ 0.578236] Console: switching to colour frame buffer device 240x67 [ 0.807738] fb0: VESA VGA frame buffer device [ 0.807748] intel_idle: MWAIT substates: 0x1120 [ 0.807753] intel_idle: v0.4 model 0x1E [ 0.807754] intel_idle: lapic_timer_reliable_states 0x2 [ 0.807855] GHES: HEST is not enabled! [ 0.807902] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.828415] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.828849] Linux agpgart interface v0.103 [ 0.828908] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.863147] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 0.863149] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 1.112634] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.112902] mousedev: PS/2 mouse device common for all mice [ 1.112959] rtc_cmos 00:03: RTC can wake from S4 [ 1.113166] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.113192] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.113245] drop_monitor: Initializing network drop monitor service [ 1.113289] TCP: cubic registered [ 1.113362] NET: Registered protocol family 10 [ 1.113493] NET: Registered protocol family 17 [ 1.113502] Key type dns_resolver registered [ 1.113873] registered taskstats version 1 [ 1.114670] Magic number: 9:255:687 [ 1.114785] rtc_cmos 00:03: setting system clock to 2013-12-08 14:40:53 UTC (1386513653) [ 1.114805] PM: Hibernation image not present or could not be loaded. [ 1.115663] Freeing unused kernel memory: 1160K (ffffffff818cd000 - ffffffff819ef000) [ 1.115665] Write protecting the kernel read-only data: 8192k [ 1.117952] Freeing unused kernel memory: 980K (ffff88000150b000 - ffff880001600000) [ 1.118747] Freeing unused kernel memory: 320K (ffff8800017b0000 - ffff880001800000) [ 1.126139] systemd-udevd[59]: starting version 208 [ 1.182548] raid6: sse2x1 6649 MB/s [ 1.239060] raid6: sse2x2 7907 MB/s [ 1.295655] raid6: sse2x4 8772 MB/s [ 1.295656] raid6: using algorithm sse2x4 (8772 MB/s) [ 1.295657] raid6: using ssse3x2 recovery algorithm [ 1.295756] xor: measuring software checksum speed [ 1.328944] prefetch64-sse: 11272.800 MB/sec [ 1.335654] tsc: Refined TSC clocksource calibration: 2719.999 MHz [ 1.362234] generic_sse: 9906.000 MB/sec [ 1.362236] xor: using function: prefetch64-sse (11272.800 MB/sec) [ 1.364885] bio: create slab at 1 [ 1.365985] Btrfs loaded [ 1.390212] ACPI: bus type USB registered [ 1.390231] usbcore: registered new interface driver usbfs [ 1.390239] usbcore: registered new interface driver hub [ 1.390327] usbcore: registered new device driver usb [ 1.390636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.390866] uhci_hcd: USB Universal Host Controller Interface driver [ 1.390989] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.390994] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.391025] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 1.391256] hub 1-0:1.0: USB hub found [ 1.391262] hub 1-0:1.0: 2 ports detected [ 1.391346] ehci-pci: EHCI PCI platform driver [ 1.391437] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.391446] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 1.391476] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 1.392442] hub 2-0:1.0: USB hub found [ 1.392448] hub 2-0:1.0: 2 ports detected [ 1.392599] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.392604] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 1.392633] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 1.392756] hub 3-0:1.0: USB hub found [ 1.392761] hub 3-0:1.0: 2 ports detected [ 1.392906] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.392914] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.392942] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 1.393052] hub 4-0:1.0: USB hub found [ 1.393057] hub 4-0:1.0: 2 ports detected [ 1.393178] SCSI subsystem initialized [ 1.393219] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.393224] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 1.393253] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 1.393557] hub 5-0:1.0: USB hub found [ 1.393562] hub 5-0:1.0: 2 ports detected [ 1.393706] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.393711] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 1.393731] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 1.393832] hub 6-0:1.0: USB hub found [ 1.393838] hub 6-0:1.0: 2 ports detected [ 1.393979] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.393984] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7 [ 1.394004] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900 [ 1.394106] hub 7-0:1.0: USB hub found [ 1.394112] hub 7-0:1.0: 2 ports detected [ 1.394494] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.394499] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 8 [ 1.394510] ehci-pci 0000:00:1a.7: debug port 2 [ 1.398545] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 1.398550] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbfff000 [ 1.399033] libata version 3.00 loaded. [ 1.399183] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001) [ 1.399818] scsi0 : pata_jmicron [ 1.399901] scsi1 : pata_jmicron [ 1.400486] ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17 [ 1.400488] ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17 [ 1.400504] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001) [ 1.401328] scsi2 : pata_jmicron [ 1.401381] scsi3 : pata_jmicron [ 1.401413] ata3: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16 [ 1.401415] ata4: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16 [ 1.405602] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.405867] hub 8-0:1.0: USB hub found [ 1.405939] hub 8-0:1.0: 6 ports detected [ 1.428919] hub 1-0:1.0: USB hub found [ 1.428925] hub 1-0:1.0: 2 ports detected [ 1.452253] hub 2-0:1.0: USB hub found [ 1.452266] hub 2-0:1.0: 2 ports detected [ 1.475609] hub 3-0:1.0: USB hub found [ 1.475616] hub 3-0:1.0: 2 ports detected [ 1.476057] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.476062] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9 [ 1.476073] ehci-pci 0000:00:1d.7: debug port 2 [ 1.479976] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.479980] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffe000 [ 1.488910] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.489237] hub 9-0:1.0: USB hub found [ 1.489249] hub 9-0:1.0: 8 ports detected [ 1.512189] hub 4-0:1.0: USB hub found [ 1.512203] hub 4-0:1.0: 2 ports detected [ 1.535535] hub 5-0:1.0: USB hub found [ 1.535541] hub 5-0:1.0: 2 ports detected [ 1.558803] hub 6-0:1.0: USB hub found [ 1.558815] hub 6-0:1.0: 2 ports detected [ 1.582140] hub 7-0:1.0: USB hub found [ 1.582147] hub 7-0:1.0: 2 ports detected [ 1.582252] ahci 0000:00:1f.2: version 3.0 [ 1.582362] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.582389] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.595496] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.595500] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst [ 1.629202] scsi4 : ahci [ 1.629359] scsi5 : ahci [ 1.629512] scsi6 : ahci [ 1.629710] scsi7 : ahci [ 1.629783] scsi8 : ahci [ 1.629843] scsi9 : ahci [ 1.629878] ata5: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd100 irq 45 [ 1.629880] ata6: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd180 irq 45 [ 1.629881] ata7: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd200 irq 45 [ 1.629883] ata8: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd280 irq 45 [ 1.629885] ata9: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd300 irq 45 [ 1.629887] ata10: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd380 irq 45 [ 1.630020] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.630023] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.630237] scsi10 : ahci [ 1.630299] scsi11 : ahci [ 1.630334] ata11: SATA max UDMA/133 abar m8192@0xfbafe000 port 0xfbafe100 irq 16 [ 1.630337] ata12: SATA max UDMA/133 abar m8192@0xfbafe000 port 0xfbafe180 irq 16 [ 1.641963] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.641966] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.642188] scsi12 : ahci [ 1.642338] scsi13 : ahci [ 1.642387] ata13: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 19 [ 1.642391] ata14: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 19 [ 1.941717] ata11: SATA link down (SStatus 0 SControl 300) [ 1.941758] ata12: SATA link down (SStatus 0 SControl 300) [ 1.961597] ata13: SATA link down (SStatus 0 SControl 300) [ 1.961637] ata14: SATA link down (SStatus 0 SControl 300) [ 2.088081] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 2.108050] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.109026] ata5.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133 [ 2.109031] ata5.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.129353] ata5.00: configured for UDMA/133 [ 2.129520] scsi 4:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5 [ 2.266032] hidraw: raw HID events driver (C) Jiri Kosina [ 2.269032] sd 4:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 2.269034] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 2.269075] sd 4:0:0:0: [sda] Write Protect is off [ 2.269077] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.269093] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.272098] usbcore: registered new interface driver usbhid [ 2.272099] usbhid: USB HID core driver [ 2.272589] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input1 [ 2.272630] hid-generic 0003:046D:C529.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0 [ 2.272849] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.1/input/input2 [ 2.272981] hid-generic 0003:046D:C529.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1 [ 2.292253] sda: unknown partition table [ 2.292414] sd 4:0:0:0: [sda] Attached SCSI disk [ 2.614104] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.615107] ata6.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133 [ 2.615112] ata6.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.637235] ata6.00: configured for UDMA/133 [ 2.637402] scsi 5:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5 [ 2.637529] sd 5:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 2.637531] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 2.637567] sd 5:0:0:0: [sdb] Write Protect is off [ 2.637569] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.637585] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.703553] sdb: sdb1 [ 2.703946] sd 5:0:0:0: [sdb] Attached SCSI disk [ 2.819124] random: lvm urandom read with 47 bits of entropy available [ 2.920383] usb 4-2: new full-speed USB device number 2 using uhci_hcd [ 2.956990] ata7: SATA link down (SStatus 0 SControl 300) [ 3.112615] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2 [ 3.117380] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0005/input/input3 [ 3.117532] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1d.0-2:1 [ 3.119441] input: Logitech Unifying Device. Wireless PID:2012 as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0005/input/input4 [ 3.119724] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2012] on usb-0000:00:1d.0-2:2 [ 3.333251] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 3.443064] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.443415] ata8.00: ATA-8: INTEL SSDSA2CW080G3, 4PC10362, max UDMA/133 [ 3.443420] ata8.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 3.443762] ata8.00: configured for UDMA/133 [ 3.443928] scsi 7:0:0:0: Direct-Access ATA INTEL SSDSA2CW08 4PC1 PQ: 0 ANSI: 5 [ 3.444031] sd 7:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.444081] sd 7:0:0:0: [sdc] Write Protect is off [ 3.444084] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.444099] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.446737] sdc: sdc1 sdc2 sdc3 sdc4 [ 3.447707] sd 7:0:0:0: [sdc] Attached SCSI disk [ 3.479588] btrfs: device label HOME devid 1 transid 26901 /dev/sdc4 [ 3.479814] btrfs: device label ROOT devid 1 transid 23037 /dev/sdc3 [ 3.762663] ata9: SATA link down (SStatus 0 SControl 300) [ 4.248719] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.249483] ata10.00: ATA-8: ST33000651AS, CC43, max UDMA/133 [ 4.249489] ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.250356] ata10.00: configured for UDMA/133 [ 4.250515] scsi 9:0:0:0: Direct-Access ATA ST33000651AS CC43 PQ: 0 ANSI: 5 [ 4.250615] sd 9:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 4.250652] sd 9:0:0:0: [sdd] Write Protect is off [ 4.250654] sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.250670] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.291557] sdd: sdd1 [ 4.291943] sd 9:0:0:0: [sdd] Attached SCSI disk [ 4.422639] btrfs: device label ROOT devid 1 transid 23037 /dev/sdc3 [ 4.423317] btrfs: disk space caching is enabled [ 4.423320] btrfs: has skinny extents [ 4.439588] random: nonblocking pool is initialized [ 4.448770] Btrfs detected SSD devices, enabling SSD mode [ 4.453107] device-mapper: uevent: version 1.0.3 [ 4.454134] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 4.458197] bio: create slab at 2 [ 4.524106] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 4.524917] systemd[1]: Set hostname to . [ 4.593340] systemd[1]: [/usr/lib/systemd/system/pacserve-ports.service:15] Unknown lvalue 'ExecRestart' in section 'Service' [ 4.593625] systemd[1]: [/usr/lib/systemd/system/lcdd.service:8] Unknown lvalue 'ControlGroup' in section 'Service' [ 4.594705] systemd[1]: Cannot add dependency job for unit nmbd.service, ignoring: Unit nmbd.service failed to load: No such file or directory. [ 4.594712] systemd[1]: Cannot add dependency job for unit smbd.service, ignoring: Unit smbd.service failed to load: No such file or directory. [ 4.594734] systemd[1]: Cannot add dependency job for unit arch-daemons.target, ignoring: Unit arch-daemons.target failed to load: No such file or directory. [ 4.594749] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 4.594757] systemd[1]: Cannot add dependency job for unit console-kit-daemon.service, ignoring: Unit console-kit-daemon.service failed to load: No such file or directory. [ 4.595589] systemd[1]: Starting Replay Read-Ahead Data... [ 4.595959] systemd[1]: Starting Collect Read-Ahead Data... [ 4.596187] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 4.596231] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.596248] systemd[1]: Starting Remote File Systems. [ 4.596258] systemd[1]: Reached target Remote File Systems. [ 4.596270] systemd[1]: Starting Delayed Shutdown Socket. [ 4.596291] systemd[1]: Listening on Delayed Shutdown Socket. [ 4.596303] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 4.596321] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.596328] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 4.596350] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 4.596357] systemd[1]: Starting LVM2 metadata daemon socket. [ 4.596373] systemd[1]: Listening on LVM2 metadata daemon socket. [ 4.596387] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 4.596413] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.596420] systemd[1]: Starting Encrypted Volumes. [ 4.596428] systemd[1]: Reached target Encrypted Volumes. [ 4.596457] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 4.596527] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.596541] systemd[1]: Starting Journal Socket. [ 4.596579] systemd[1]: Listening on Journal Socket. [ 4.596600] systemd[1]: Starting Store Sound Card State... [ 4.596838] systemd[1]: Mounting Debug File System... [ 4.598937] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 4.599157] systemd[1]: Mounting POSIX Message Queue File System... [ 4.599559] systemd[1]: Mounting Huge Pages File System... [ 4.599817] systemd[1]: Starting Journal Service... [ 4.600078] systemd[1]: Started Journal Service. [ 4.632186] systemd-journald[176]: Vacuuming done, freed 0 bytes [ 4.684507] systemd-udevd[209]: starting version 208 [ 4.686362] it87: Found IT8720F chip at 0x290, revision 8 [ 4.686370] it87: VID is disabled (pins used for GPIO) [ 4.686379] it87: Routing internal VCCH to in7 [ 4.686383] it87: Beeping is supported [ 4.706963] fuse init (API version 7.22) [ 4.712939] btrfs: use ssd allocation scheme [ 4.712942] btrfs: use lzo compression [ 4.712945] btrfs: enabling auto defrag [ 4.712946] btrfs: disk space caching is enabled [ 4.730874] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 4.730879] ACPI: Power Button [PWRB] [ 4.730922] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 4.730924] ACPI: Power Button [PWRF] [ 4.742710] parport_pc 00:07: reported by Plug and Play ACPI [ 4.742786] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 4.747464] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.757124] [drm] Initialized drm 1.1.0 20060810 [ 4.769021] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.769030] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.769260] r8169 0000:03:00.0: irq 46 for MSI/MSI-X [ 4.769392] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90006c06000, 00:24:1d:d9:1a:a7, XID 083000c0 IRQ 46 [ 4.769394] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 4.780898] ALSA hda_intel.c:3170 0000:01:00.1: Handle VGA-switcheroo audio client [ 4.780901] ALSA hda_intel.c:3364 0000:01:00.1: Using LPIB position fix [ 4.780903] ALSA hda_intel.c:3510 0000:01:00.1: Force to non-snoop mode [ 4.780936] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X [ 4.780957] ALSA hda_intel.c:3635 0000:01:00.1: chipset global capabilities = 0x0 [ 4.784020] ALSA hda_intel.c:1244 0000:01:00.1: codec_mask = 0x1 [ 4.784074] ALSA hda_intel.c:1716 0000:01:00.1: codec #0 probed OK [ 4.784076] ALSA hda_intel.c:1837 0000:01:00.1: Enable sync_write for stable communication [ 4.787279] [drm] radeon kernel modesetting enabled. [ 4.791524] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 4.792864] ALSA hda_codec.c:4506 Too many HDMI devices [ 4.792866] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y [ 4.792867] ALSA hda_codec.c:4506 Too many HDMI devices [ 4.792868] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y [ 4.792870] ALSA hda_codec.c:4506 Too many HDMI devices [ 4.792871] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y [ 4.792872] ALSA hda_codec.c:4506 Too many HDMI devices [ 4.792873] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y [ 4.793045] ALSA patch_hdmi.c:1301 HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 4.793075] ALSA patch_hdmi.c:1301 HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 4.793105] ALSA patch_hdmi.c:1301 HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0 [ 4.793108] ALSA control.c:352 control 0:0:0:HDMI/DP Jack:0 is already present [ 4.795183] hda_codec: cannot build controls for #0 (error -16) [ 4.795805] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251) [ 4.795806] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.795824] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.798690] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 4.798692] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver [ 4.798705] Console: switching to colour dummy device 80x25 [ 4.799125] EDAC MC: Ver: 3.0.0 [ 4.800859] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6818 0x1462:0x2740). [ 4.800882] [drm] register mmio base: 0xFBC80000 [ 4.800883] [drm] register mmio size: 262144 [ 4.800935] ATOM BIOS: 113 [ 4.801007] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 4.801009] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF [ 4.801010] [drm] Detected VRAM RAM=2048M, BAR=256M [ 4.801011] [drm] RAM width 256bits DDR [ 4.802613] cfg80211: Calling CRDA to update world regulatory domain [ 4.802664] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED) [ 4.803037] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED) [ 4.803041] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 4.803284] [TTM] Zone kernel: Available graphics memory: 8214956 kiB [ 4.803286] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 4.803288] [TTM] Initializing pool allocator [ 4.803295] [TTM] Initializing DMA pool allocator [ 4.803317] [drm] radeon: 2048M of VRAM memory ready [ 4.803318] [drm] radeon: 1024M of GTT memory ready. [ 4.808900] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 4.810178] [drm] probing gen 2 caps for device 8086:d138 = 393d02/0 [ 4.810182] [drm] PCIE gen 2 link speeds already enabled [ 4.814290] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 4.818429] Error: Driver 'pcspkr' is already registered, aborting... [ 4.823602] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4 [ 4.823684] platform microcode: Direct firmware load failed with error -2 [ 4.823686] platform microcode: Falling back to user helper [ 4.825250] input: iMON Panel, Knob and Mouse(15c2:0038) as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input11 [ 4.834098] [drm] Loading PITCAIRN Microcode [ 4.844306] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000). [ 4.844509] radeon 0000:01:00.0: WB enabled [ 4.844512] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8804089bbc00 [ 4.844514] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8804089bbc04 [ 4.844516] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8804089bbc08 [ 4.844518] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8804089bbc0c [ 4.844519] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8804089bbc10 [ 4.846265] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc900069b5a18 [ 4.846267] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.846268] [drm] Driver supports precise vblank timestamp query. [ 4.846286] radeon 0000:01:00.0: irq 48 for MSI/MSI-X [ 4.846298] radeon 0000:01:00.0: radeon: using MSI. [ 4.846327] [drm] radeon: irq initialized. [ 4.861210] Registered IR keymap rc-imon-pad [ 4.861292] input: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/rc/rc0/input12 [ 4.861465] rc0: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/rc/rc0 [ 4.871226] imon 5-1:1.0: iMON device (15c2:0038, intf0) on usb<5:2> initialized [ 4.871244] imon 5-1:1.1: iMON device (15c2:0038, intf1) on usb<5:2> initialized [ 4.871254] usbcore: registered new interface driver imon [ 4.873485] ppdev: user-space parallel port driver [ 4.877733] iTCO_vendor_support: vendor-support=0 [ 4.878003] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 4.878027] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0460) [ 4.878099] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.885515] gpio_ich: GPIO from 180 to 255 on gpio_ich [ 4.889652] btrfs: device label ROOT devid 1 transid 23038 /dev/sdc3 [ 4.904199] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4 [ 4.904213] platform microcode: Direct firmware load failed with error -2 [ 4.904215] platform microcode: Falling back to user helper [ 4.913360] btrfs: device label HOME devid 1 transid 26901 /dev/sdc4 [ 4.916094] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4 [ 4.916108] platform microcode: Direct firmware load failed with error -2 [ 4.916111] platform microcode: Falling back to user helper [ 4.916801] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4 [ 4.916811] platform microcode: Direct firmware load failed with error -2 [ 4.916812] platform microcode: Falling back to user helper [ 4.917099] cfg80211: World regulatory domain updated: [ 4.917101] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.917103] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4.917104] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4.917106] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 4.917107] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 4.917108] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 4.917109] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 4.918368] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 4.924751] btrfs: device label HOME devid 1 transid 26901 /dev/sdc4 [ 4.925430] btrfs: use ssd allocation scheme [ 4.925433] btrfs: use lzo compression [ 4.925436] btrfs: enabling auto defrag [ 4.925437] btrfs: disk space caching is enabled [ 4.925438] btrfs: has skinny extents [ 4.927127] imon 5-1:1.0: Looks like you're trying to use an IR protocol this device does not support [ 4.927130] imon 5-1:1.0: Unsupported IR protocol specified, overriding to iMON IR protocol [ 4.939516] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 4.992529] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: discard [ 5.075783] [drm] ring test on 0 succeeded in 3 usecs [ 5.075790] [drm] ring test on 1 succeeded in 1 usecs [ 5.075795] [drm] ring test on 2 succeeded in 1 usecs [ 5.075860] [drm] ring test on 3 succeeded in 2 usecs [ 5.075872] [drm] ring test on 4 succeeded in 1 usecs [ 5.262834] [drm] ring test on 5 succeeded in 2 usecs [ 5.262842] [drm] UVD initialized successfully. [ 5.263935] [drm] Enabling audio 0 support [ 5.263937] [drm] Enabling audio 1 support [ 5.263938] [drm] Enabling audio 2 support [ 5.263939] [drm] Enabling audio 3 support [ 5.263941] [drm] Enabling audio 4 support [ 5.263942] [drm] Enabling audio 5 support [ 5.264004] [drm] ib test on ring 0 succeeded in 0 usecs [ 5.264064] [drm] ib test on ring 1 succeeded in 0 usecs [ 5.264127] [drm] ib test on ring 2 succeeded in 0 usecs [ 5.264161] [drm] ib test on ring 3 succeeded in 0 usecs [ 5.264194] [drm] ib test on ring 4 succeeded in 1 usecs [ 5.310888] ath: EEPROM regdomain: 0x809c [ 5.310891] ath: EEPROM indicates we should expect a country code [ 5.310892] ath: doing EEPROM country->regdmn map search [ 5.310893] ath: country maps to regdmn code: 0x52 [ 5.310894] ath: Country alpha2 being used: CN [ 5.310895] ath: Regpair used: 0x52 [ 5.317519] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 5.317682] ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffc90006940000, irq=19 [ 5.317782] cfg80211: Calling CRDA for country: CN [ 5.320856] cfg80211: Regulatory domain changed to country: CN [ 5.320858] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.320860] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5.320861] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2300 mBm) [ 5.320863] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm) [ 5.320864] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm) [ 5.320865] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm) [ 5.320866] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm) [ 5.320867] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm) [ 5.423880] [drm] ib test on ring 5 succeeded [ 5.424626] [drm] Radeon Display Connectors [ 5.424628] [drm] Connector 0: [ 5.424629] [drm] DP-1 [ 5.424630] [drm] HPD4 [ 5.424631] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 5.424632] [drm] Encoders: [ 5.424633] [drm] DFP1: INTERNAL_UNIPHY2 [ 5.424634] [drm] Connector 1: [ 5.424635] [drm] DP-2 [ 5.424635] [drm] HPD5 [ 5.424637] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 5.424637] [drm] Encoders: [ 5.424638] [drm] DFP2: INTERNAL_UNIPHY2 [ 5.424639] [drm] Connector 2: [ 5.424640] [drm] HDMI-A-1 [ 5.424641] [drm] HPD1 [ 5.424642] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 5.424643] [drm] Encoders: [ 5.424644] [drm] DFP3: INTERNAL_UNIPHY1 [ 5.424644] [drm] Connector 3: [ 5.424645] [drm] DVI-I-1 [ 5.424646] [drm] HPD6 [ 5.424647] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 5.424648] [drm] Encoders: [ 5.424649] [drm] DFP4: INTERNAL_UNIPHY [ 5.424650] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 5.424709] [drm] Internal thermal controller with fan control [ 5.424747] [drm] probing gen 2 caps for device 8086:d138 = 393d02/0 [ 5.424808] == power state 0 == [ 5.424809] ui class: none [ 5.424810] internal class: boot [ 5.424812] caps: [ 5.424813] uvd vclk: 0 dclk: 0 [ 5.424814] power level 0 sclk: 15000 mclk: 15000 vddc: 900 vddci: 950 pcie gen: 2 [ 5.424815] status: c r b [ 5.424817] == power state 1 == [ 5.424818] ui class: performance [ 5.424818] internal class: none [ 5.424820] caps: [ 5.424821] uvd vclk: 0 dclk: 0 [ 5.424822] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2 [ 5.424823] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2 [ 5.424825] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2 [ 5.424825] status: [ 5.424826] == power state 2 == [ 5.424827] ui class: none [ 5.424828] internal class: uvd [ 5.424829] caps: video [ 5.424830] uvd vclk: 72000 dclk: 56000 [ 5.424832] power level 0 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2 [ 5.424833] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2 [ 5.424834] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2 [ 5.424835] status: [ 5.424836] == power state 3 == [ 5.424837] ui class: none [ 5.424838] internal class: ulv [ 5.424839] caps: [ 5.424840] uvd vclk: 0 dclk: 0 [ 5.424841] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2 [ 5.424842] power level 1 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2 [ 5.424844] power level 2 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2 [ 5.424844] status: [ 5.427298] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: barrier=1,acl,commit=60 [ 5.431559] systemd-journald[176]: Received request to flush runtime journal from PID 1 [ 5.564515] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.759228] r8169 0000:03:00.0 eth0: link down [ 5.760235] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.770360] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.165899] switching from power state: [ 6.165902] ui class: none [ 6.165904] internal class: boot [ 6.165905] caps: [ 6.165907] uvd vclk: 0 dclk: 0 [ 6.165909] power level 0 sclk: 15000 mclk: 15000 vddc: 900 vddci: 950 pcie gen: 2 [ 6.165909] status: c b [ 6.165911] switching to power state: [ 6.165911] ui class: performance [ 6.165912] internal class: none [ 6.165913] caps: [ 6.165915] uvd vclk: 0 dclk: 0 [ 6.165916] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2 [ 6.165917] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2 [ 6.165919] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2 [ 6.165919] status: r [ 6.837045] [drm] radeon: dpm initialized [ 6.921494] [drm] fb mappable at 0xE1480000 [ 6.921497] [drm] vram apper at 0xE0000000 [ 6.921498] [drm] size 8294400 [ 6.921499] [drm] fb depth is 24 [ 6.921500] [drm] pitch is 7680 [ 6.921613] fbcon: radeondrmfb (fb0) is primary device [ 6.921883] switching from power state: [ 6.921884] ui class: performance [ 6.921885] internal class: none [ 6.921885] caps: [ 6.921886] uvd vclk: 0 dclk: 0 [ 6.921887] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2 [ 6.921888] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2 [ 6.921889] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2 [ 6.921890] status: c r [ 6.921890] switching to power state: [ 6.921890] ui class: performance [ 6.921891] internal class: none [ 6.921891] caps: [ 6.921892] uvd vclk: 0 dclk: 0 [ 6.921893] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2 [ 6.921893] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2 [ 6.921894] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2 [ 6.921895] status: c r [ 7.576167] Console: switching to colour frame buffer device 240x67 [ 7.581084] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 7.581086] radeon 0000:01:00.0: registered panic notifier [ 7.581093] [drm] Initialized radeon 2.35.0 20080528 for 0000:01:00.0 on minor 0 [ 8.287601] type=1006 audit(1386513660.679:2): pid=512 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1 [ 13.704490] wlan0: authenticate with 00:23:69:65:2b:59 [ 13.709304] wlan0: send auth to 00:23:69:65:2b:59 (try 1/3) [ 13.748567] wlan0: authenticated [ 13.750150] wlan0: associate with 00:23:69:65:2b:59 (try 1/3) [ 13.752545] wlan0: RX AssocResp from 00:23:69:65:2b:59 (capab=0x411 status=0 aid=4) [ 13.752590] wlan0: associated [ 13.752608] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready