On 2023/6/13 20:46, Conor Dooley wrote:
On Tue, Jun 13, 2023 at 08:38:59PM +0800, Yingkun Meng wrote:
On 2023/6/13 20:28, Conor Dooley wrote:
On Tue, Jun 13, 2023 at 08:23:58PM +0800, Yingkun Meng wrote:
On 2023/6/13 01:24, Conor Dooley wrote:
On Mon, Jun 12, 2023 at 04:56:14PM +0800, YingKun Meng wrote:
From: Yingkun Meng mengyingkun@loongson.cn
The audio card uses loongson I2S controller present in 7axxx/2kxxx chips to transfer audio data.
On loongson platform, the chip has only one I2S controller. +description:
- The binding describes the sound card present in loongson
- 7axxx/2kxxx platform. The sound card is an ASoC component
- which uses Loongson I2S controller to transfer the audio data.
+properties:
- compatible:
- const: loongson,ls-audio-card
Reviewing sound stuff is beyond my pay grade, so forgive me if I am off the rails here, but this (and the "x"s in the description) look a bit odd. Recently, we've noticed quite a few loongson dt-bindings attempting to use a single compatible for many different chips. Usually you have individual compatibles for the various SoCs with this core, which can fall back to a generic one, rather than just adding a generic compatible for all devices. As far as I know, there's several SoCs fitting 2kxxx, and the format being used elsewhere is "loongson,ls2k1000" etc.
Currently, Loongson has 2K0500/2K1000LA/2K1500/2K2000 chips.
Here, its' possible to use a single compatible for different chips,
as the audio device is a logical device, not dependent on chip model.
What, may I ask, is a "logical device"?
I means it's not a physical one, like "platform bus".
So it is entirely a software construct? Why does it need a dt-binding then? Your commit message says the controller is present on the device!
It's not. The audio device consists of an i2s controller and codec.
The dt-binding is for the audio device, not for i2s controller.
Confused, Conor.