On 19/03/2021 15:23, Pierre-Louis Bossart wrote:
+static void wcd_clsh_v3_set_hph_mode(struct snd_soc_component *component, + int mode) +{ + u8 val = 0;
initialization not needed.
I agree, will remove this in next spin.
+ switch (mode) { + case CLS_H_NORMAL: + val = 0x00; + break; + case CLS_AB: + case CLS_H_ULP: + val = 0x0C; + break; + case CLS_AB_HIFI: + case CLS_H_HIFI: + val = 0x08; + break; + case CLS_H_LP: + case CLS_H_LOHIFI: + case CLS_AB_LP: + case CLS_AB_LOHIFI: + val = 0x04; + break; + default: + dev_err(component->dev, "%s:Invalid mode %d\n", __func__, mode); + return; + };
+ snd_soc_component_update_bits(component, WCD9XXX_ANA_HPH, 0x0C, val); +}
extra line
will remove this in next spin.
+void wcd_clsh_set_hph_mode(struct wcd_clsh_ctrl *ctrl, int mode) +{ + struct snd_soc_component *comp = ctrl->comp;
+ if (ctrl->codec_version >= WCD937X) + wcd_clsh_v3_set_hph_mode(comp, mode); + else + wcd_clsh_v2_set_hph_mode(comp, mode);
+}
static void wcd_clsh_set_flyback_current(struct snd_soc_component *comp, int mode) { @@ -289,6 +388,130 @@ static void wcd_clsh_set_buck_regulator_mode(struct snd_soc_component *comp, WCD9XXX_A_ANA_RX_REGULATOR_MODE_CLS_H); } +static void wcd_clsh_v3_set_buck_regulator_mode(struct snd_soc_component *component, + int mode) +{ + snd_soc_component_update_bits(component, WCD9XXX_ANA_RX_SUPPLIES, + 0x02, 0x00); +}
+static inline void wcd_clsh_v3_set_flyback_mode(struct snd_soc_component *component, + int mode) +{ + if (mode == CLS_H_HIFI || mode == CLS_H_LOHIFI || + mode == CLS_AB_HIFI || mode == CLS_AB_LOHIFI) { + snd_soc_component_update_bits(component, + WCD9XXX_ANA_RX_SUPPLIES, + 0x04, 0x04); + snd_soc_component_update_bits(component, + WCD9XXX_FLYBACK_VNEG_CTRL_4, + 0xF0, 0x80); + } else { + snd_soc_component_update_bits(component, + WCD9XXX_ANA_RX_SUPPLIES, + 0x04, 0x00); /* set to Default */ + snd_soc_component_update_bits(component, + WCD9XXX_FLYBACK_VNEG_CTRL_4, + 0xF0, 0x70); + } +}
+static inline void wcd_clsh_v3_force_iq_ctl(struct snd_soc_component *component, + int mode, bool enable) +{ + if (enable) { + snd_soc_component_update_bits(component, + WCD9XXX_FLYBACK_VNEGDAC_CTRL_2, + 0xE0, 0xA0); + /* 100usec delay is needed as per HW requirement */ + usleep_range(100, 110); + snd_soc_component_update_bits(component, + WCD9XXX_CLASSH_MODE_3, + 0x02, 0x02); + snd_soc_component_update_bits(component, + WCD9XXX_CLASSH_MODE_2, + 0xFF, 0x1C); + if (mode == CLS_H_LOHIFI || mode == CLS_AB_LOHIFI) { + snd_soc_component_update_bits(component, + WCD9XXX_HPH_NEW_INT_PA_MISC2, + 0x20, 0x20); + snd_soc_component_update_bits(component, + WCD9XXX_RX_BIAS_HPH_LOWPOWER, + 0xF0, 0xC0); + snd_soc_component_update_bits(component, + WCD9XXX_HPH_PA_CTL1, + 0x0E, 0x02); + } + } else { + snd_soc_component_update_bits(component, + WCD9XXX_HPH_NEW_INT_PA_MISC2, + 0x20, 0x00); + snd_soc_component_update_bits(component, + WCD9XXX_RX_BIAS_HPH_LOWPOWER, + 0xF0, 0x80); + snd_soc_component_update_bits(component, + WCD9XXX_HPH_PA_CTL1, + 0x0E, 0x06); + } +}
do you need the inline for the two functions above?
yes, these are totally unnecessary.
--srini