The patch
ASoC: amd: sram bank update changes
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 18e8a40dd387856e7f7a067dcfecbe644afe6944 Mon Sep 17 00:00:00 2001
From: "Mukunda, Vijendar" Vijendar.Mukunda@amd.com Date: Tue, 8 May 2018 10:17:48 +0530 Subject: [PATCH] ASoC: amd: sram bank update changes
Added sram bank variable to audio_substream_data structure.
Signed-off-by: Vijendar Mukunda Vijendar.Mukunda@amd.com Reviewed-by: Daniel Kurtz djkurtz@chromium.org Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/amd/acp-pcm-dma.c | 20 +++++--------------- sound/soc/amd/acp.h | 20 ++++++++++++++------ 2 files changed, 19 insertions(+), 21 deletions(-)
diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index a3a7470a54db..39cd54f1b493 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -320,29 +320,16 @@ static void config_acp_dma(void __iomem *acp_mmio, struct audio_substream_data *rtd, u32 asic_type) { - u32 sram_bank; - - if (rtd->direction == SNDRV_PCM_STREAM_PLAYBACK) - sram_bank = ACP_SHARED_RAM_BANK_1_ADDRESS; - else { - switch (asic_type) { - case CHIP_STONEY: - sram_bank = ACP_SHARED_RAM_BANK_3_ADDRESS; - break; - default: - sram_bank = ACP_SHARED_RAM_BANK_5_ADDRESS; - } - } acp_pte_config(acp_mmio, rtd->pg, rtd->num_of_pages, rtd->pte_offset); /* Configure System memory <-> ACP SRAM DMA descriptors */ set_acp_sysmem_dma_descriptors(acp_mmio, rtd->size, rtd->direction, rtd->pte_offset, - rtd->ch1, sram_bank, + rtd->ch1, rtd->sram_bank, rtd->dma_dscr_idx_1, asic_type); /* Configure ACP SRAM <-> I2S DMA descriptors */ set_acp_to_i2s_dma_descriptors(acp_mmio, rtd->size, - rtd->direction, sram_bank, + rtd->direction, rtd->sram_bank, rtd->destination, rtd->ch2, rtd->dma_dscr_idx_2, asic_type); } @@ -795,6 +782,7 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream, } rtd->ch1 = SYSRAM_TO_ACP_CH_NUM; rtd->ch2 = ACP_TO_I2S_DMA_CH_NUM; + rtd->sram_bank = ACP_SRAM_BANK_1_ADDRESS; rtd->destination = TO_ACP_I2S_1; rtd->dma_dscr_idx_1 = PLAYBACK_START_DMA_DESCR_CH12; rtd->dma_dscr_idx_2 = PLAYBACK_START_DMA_DESCR_CH13; @@ -805,9 +793,11 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream, switch (adata->asic_type) { case CHIP_STONEY: rtd->pte_offset = ACP_ST_CAPTURE_PTE_OFFSET; + rtd->sram_bank = ACP_SRAM_BANK_2_ADDRESS; break; default: rtd->pte_offset = ACP_CAPTURE_PTE_OFFSET; + rtd->sram_bank = ACP_SRAM_BANK_5_ADDRESS; } rtd->ch1 = ACP_TO_SYSRAM_CH_NUM; rtd->ch2 = I2S_TO_ACP_DMA_CH_NUM; diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h index 2f48d1d25243..62695ede997d 100644 --- a/sound/soc/amd/acp.h +++ b/sound/soc/amd/acp.h @@ -19,12 +19,19 @@
#define ACP_PHYSICAL_BASE 0x14000
-/* Playback SRAM address (as a destination in dma descriptor) */ -#define ACP_SHARED_RAM_BANK_1_ADDRESS 0x4002000 - -/* Capture SRAM address (as a source in dma descriptor) */ -#define ACP_SHARED_RAM_BANK_5_ADDRESS 0x400A000 -#define ACP_SHARED_RAM_BANK_3_ADDRESS 0x4006000 +/* + * In case of I2S SP controller instance, Stoney uses SRAM bank 1 for + * playback and SRAM Bank 2 for capture where as in case of BT I2S + * Instance, Stoney uses SRAM Bank 3 for playback & SRAM Bank 4 will + * be used for capture. Carrizo uses I2S SP controller instance. SRAM Banks + * 1, 2, 3, 4 will be used for playback & SRAM Banks 5, 6, 7, 8 will be used + * for capture scenario. + */ +#define ACP_SRAM_BANK_1_ADDRESS 0x4002000 +#define ACP_SRAM_BANK_2_ADDRESS 0x4004000 +#define ACP_SRAM_BANK_3_ADDRESS 0x4006000 +#define ACP_SRAM_BANK_4_ADDRESS 0x4008000 +#define ACP_SRAM_BANK_5_ADDRESS 0x400A000
#define ACP_DMA_RESET_TIME 10000 #define ACP_CLOCK_EN_TIME_OUT_VALUE 0x000000FF @@ -95,6 +102,7 @@ struct audio_substream_data { u16 dma_dscr_idx_1; u16 dma_dscr_idx_2; u32 pte_offset; + u32 sram_bank; u32 byte_cnt_high_reg_offset; u32 byte_cnt_low_reg_offset; uint64_t size;