Some regulator config can be moved out from board files, since they are close to identical.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- arch/arm/mach-omap2/board-3430sdp.c | 51 ++++---------------------- arch/arm/mach-omap2/board-cm-t35.c | 41 +++------------------ arch/arm/mach-omap2/board-devkit8000.c | 21 +---------- arch/arm/mach-omap2/board-igep0020.c | 28 +++------------ arch/arm/mach-omap2/board-omap3beagle.c | 44 ++-------------------- arch/arm/mach-omap2/board-omap3evm.c | 47 +++--------------------- arch/arm/mach-omap2/board-omap3pandora.c | 44 ++++------------------ arch/arm/mach-omap2/board-omap3stalker.c | 48 +++--------------------- arch/arm/mach-omap2/board-omap3touchbook.c | 40 ++++---------------- arch/arm/mach-omap2/board-overo.c | 44 ++-------------------- arch/arm/mach-omap2/board-rx51-peripherals.c | 25 ++----------- arch/arm/mach-omap2/board-zoom-peripherals.c | 41 ++------------------- arch/arm/mach-omap2/twl-common.c | 42 +++++++++++++++++++++ arch/arm/mach-omap2/twl-common.h | 5 +++ 14 files changed, 109 insertions(+), 412 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 4810dcc..d944a56 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -283,16 +283,6 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = { REGULATOR_SUPPLY("vcc", "spi1.0"), };
-static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -409,36 +399,6 @@ static struct regulator_init_data sdp3430_vsim = { .consumer_supplies = sdp3430_vsim_supplies, };
-/* VDAC for DSS driving S-Video */ -static struct regulator_init_data sdp3430_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies), - .consumer_supplies = sdp3430_vdda_dac_supplies, -}; - -static struct regulator_init_data sdp3430_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies), - .consumer_supplies = sdp3430_vpll2_supplies, -}; - static struct twl4030_platform_data sdp3430_twldata = { /* platform_data for children goes here */ .gpio = &sdp3430_gpio_data, @@ -451,16 +411,19 @@ static struct twl4030_platform_data sdp3430_twldata = { .vmmc1 = &sdp3430_vmmc1, .vmmc2 = &sdp3430_vmmc2, .vsim = &sdp3430_vsim, - .vdac = &sdp3430_vdac, - .vpll2 = &sdp3430_vpll2, };
static int __init omap3430_i2c_init(void) { /* i2c1 for PMIC only */ omap3_pmic_get_config(&sdp3430_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI | - TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, 0); + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI | + TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + sdp3430_twldata.vdac->constraints.apply_uV = true; + sdp3430_twldata.vpll2->constraints.apply_uV = true; + sdp3430_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("twl4030", &sdp3430_twldata);
/* i2c2 on camera connector (for sensor control) and optional isp1301 */ diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e867474..2ae6afe 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -345,9 +345,6 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = { .supply = "vmmc_aux", };
-static struct regulator_consumer_supply cm_t35_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - static struct regulator_consumer_supply cm_t35_vdvi_supply = REGULATOR_SUPPLY("vdvi", "omapdss");
@@ -381,35 +378,6 @@ static struct regulator_init_data cm_t35_vsim = { .consumer_supplies = &cm_t35_vsim_supply, };
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data cm_t35_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vdac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data cm_t35_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vdvi_supply, -}; - static uint32_t cm_t35_keymap[] = { KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT), KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN), @@ -497,13 +465,16 @@ static struct twl4030_platform_data cm_t35_twldata = { .gpio = &cm_t35_gpio_data, .vmmc1 = &cm_t35_vmmc1, .vsim = &cm_t35_vsim, - .vdac = &cm_t35_vdac, - .vpll2 = &cm_t35_vpll2, };
static void __init cm_t35_init_i2c(void) { - omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, 0); + omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + cm_t35_twldata.vpll2->constraints.name = "VDVI"; + cm_t35_twldata.vpll2->num_consumer_supplies = 1; + cm_t35_twldata.vpll2->consumer_supplies = &cm_t35_vdvi_supply; + omap3_pmic_init("tps65930", &cm_t35_twldata); }
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index aa6a173..f7bc171 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -186,9 +186,6 @@ static struct omap_dss_board_info devkit8000_dss_data = { .default_device = &devkit8000_lcd_device, };
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), @@ -288,20 +285,6 @@ static struct regulator_init_data devkit8000_vmmc1 = { .consumer_supplies = &devkit8000_vmmc1_supply, };
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data devkit8000_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vdda_dac_supply, -}; - /* VPLL1 for digital video outputs */ static struct regulator_init_data devkit8000_vpll1 = { .constraints = { @@ -335,7 +318,6 @@ static struct twl4030_platform_data devkit8000_twldata = { /* platform_data for children goes here */ .gpio = &devkit8000_gpio_data, .vmmc1 = &devkit8000_vmmc1, - .vdac = &devkit8000_vdac, .vpll1 = &devkit8000_vpll1, .vio = &devkit8000_vio, .keypad = &devkit8000_kp_data, @@ -344,7 +326,8 @@ static struct twl4030_platform_data devkit8000_twldata = { static int __init devkit8000_i2c_init(void) { omap3_pmic_get_config(&devkit8000_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0); + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC); omap3_pmic_init("tps65930", &devkit8000_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index bb3723a..48f86e1 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -476,26 +476,6 @@ static struct omap_dss_board_info igep2_dss_data = { .default_device = &igep2_dvi_device, };
-static struct regulator_consumer_supply igep2_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_init_data igep2_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies), - .consumer_supplies = igep2_vpll2_supplies, -}; - static void __init igep2_display_init(void) { int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, @@ -576,9 +556,11 @@ static void __init igep_i2c_init(void) pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
igep_twldata.keypad = &igep2_keypad_pdata; - igep_twldata.vpll2 = &igep2_vpll2; - /* Use common codec data */ - omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0); + /* Get common pmic data */ + omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VPLL2); + igep_twldata.vpll2->constraints.apply_uV = true; + igep_twldata.vpll2->constraints.name = "VDVI"; }
omap3_pmic_init("twl4030", &igep_twldata); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 63104e8..ff991ca 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -210,14 +210,6 @@ static struct omap_dss_board_info beagle_dss_data = { .default_device = &beagle_dvi_device, };
-static struct regulator_consumer_supply beagle_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -static struct regulator_consumer_supply beagle_vdvi_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - static void __init beagle_display_init(void) { int r; @@ -355,42 +347,11 @@ static struct regulator_init_data beagle_vsim = { .consumer_supplies = &beagle_vsim_supply, };
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data beagle_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vdac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data beagle_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(beagle_vdvi_supplies), - .consumer_supplies = beagle_vdvi_supplies, -}; - static struct twl4030_platform_data beagle_twldata = { /* platform_data for children goes here */ .gpio = &beagle_gpio_data, .vmmc1 = &beagle_vmmc1, .vsim = &beagle_vsim, - .vdac = &beagle_vdac, - .vpll2 = &beagle_vpll2, };
static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { @@ -402,7 +363,10 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { static int __init omap3_beagle_i2c_init(void) { omap3_pmic_get_config(&beagle_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0); + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + beagle_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("twl4030", &beagle_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 3e7e902..e6fa723 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -434,44 +434,6 @@ static struct twl4030_keypad_data omap3evm_kp_data = { .rep = 1, };
-static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data omap3_evm_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_evm_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_init_data omap3_evm_vpll2 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies), - .consumer_supplies = omap3_evm_vpll2_supplies, -}; - /* ads7846 on SPI */ static struct regulator_consumer_supply omap3evm_vio_supply = REGULATOR_SUPPLY("vcc", "spi1.0"); @@ -536,8 +498,6 @@ static struct twl4030_platform_data omap3evm_twldata = { /* platform_data for children goes here */ .keypad = &omap3evm_kp_data, .gpio = &omap3evm_gpio_data, - .vdac = &omap3_evm_vdac, - .vpll2 = &omap3_evm_vpll2, .vio = &omap3evm_vio, .vmmc1 = &omap3evm_vmmc1, .vsim = &omap3evm_vsim, @@ -546,8 +506,11 @@ static struct twl4030_platform_data omap3evm_twldata = { static int __init omap3_evm_i2c_init(void) { omap3_pmic_get_config(&omap3evm_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | - TWL_COMMON_PDATA_AUDIO, 0); + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | + TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + omap3evm_twldata.vdac->constraints.apply_uV = true; + omap3evm_twldata.vpll2->constraints.apply_uV = true; omap3_pmic_init("twl4030", &omap3evm_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 7bfe109..db8b206 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -329,9 +329,6 @@ static struct regulator_consumer_supply pandora_vmmc2_supply = static struct regulator_consumer_supply pandora_vmmc3_supply = REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2");
-static struct regulator_consumer_supply pandora_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - static struct regulator_consumer_supply pandora_vdds_supplies[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), REGULATOR_SUPPLY("vdds_dsi", "omapdss"), @@ -384,36 +381,6 @@ static struct regulator_init_data pandora_vmmc2 = { .consumer_supplies = &pandora_vmmc2_supply, };
-/* VDAC for DSS driving S-Video */ -static struct regulator_init_data pandora_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data pandora_vpll2 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_vdds_supplies), - .consumer_supplies = pandora_vdds_supplies, -}; - /* VAUX1 for LCD */ static struct regulator_init_data pandora_vaux1 = { .constraints = { @@ -507,8 +474,6 @@ static struct twl4030_platform_data omap3pandora_twldata = { .gpio = &omap3pandora_gpio_data, .vmmc1 = &pandora_vmmc1, .vmmc2 = &pandora_vmmc2, - .vdac = &pandora_vdac, - .vpll2 = &pandora_vpll2, .vaux1 = &pandora_vaux1, .vaux2 = &pandora_vaux2, .vaux4 = &pandora_vaux4, @@ -527,7 +492,14 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { static int __init omap3pandora_i2c_init(void) { omap3_pmic_get_config(&omap3pandora_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0); + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + omap3pandora_twldata.vdac->constraints.apply_uV = true; + omap3pandora_twldata.vpll2->constraints.apply_uV = true; + omap3pandora_twldata.vpll2->num_consumer_supplies = + ARRAY_SIZE(pandora_vdds_supplies); + omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies; + omap3_pmic_init("tps65950", &omap3pandora_twldata); /* i2c2 pins are not connected */ omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 2b52281..e40e08c 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -388,51 +388,10 @@ static struct twl4030_keypad_data omap3stalker_kp_data = { .rep = 1, };
-static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data omap3_stalker_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_stalker_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_init_data omap3_stalker_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies), - .consumer_supplies = omap3_stalker_vpll2_supplies, -}; - static struct twl4030_platform_data omap3stalker_twldata = { /* platform_data for children goes here */ .keypad = &omap3stalker_kp_data, .gpio = &omap3stalker_gpio_data, - .vdac = &omap3_stalker_vdac, - .vpll2 = &omap3_stalker_vpll2, .vmmc1 = &omap3stalker_vmmc1, .vsim = &omap3stalker_vsim, }; @@ -455,7 +414,12 @@ static int __init omap3_stalker_i2c_init(void) { omap3_pmic_get_config(&omap3stalker_twldata, TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | - TWL_COMMON_PDATA_AUDIO, 0); + TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + omap3stalker_twldata.vdac->constraints.apply_uV = true; + omap3stalker_twldata.vpll2->constraints.apply_uV = true; + omap3stalker_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("twl4030", &omap3stalker_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 094ea80..a0a3cf0 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -207,42 +207,11 @@ static struct regulator_init_data touchbook_vsim = { .consumer_supplies = &touchbook_vsim_supply, };
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data touchbook_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vdac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data touchbook_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vdvi_supply, -}; - static struct twl4030_platform_data touchbook_twldata = { /* platform_data for children goes here */ .gpio = &touchbook_gpio_data, .vmmc1 = &touchbook_vmmc1, .vsim = &touchbook_vsim, - .vdac = &touchbook_vdac, - .vpll2 = &touchbook_vpll2, };
static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { @@ -255,7 +224,14 @@ static int __init omap3_touchbook_i2c_init(void) { /* Standard TouchBook bus */ omap3_pmic_get_config(&touchbook_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0); + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + touchbook_twldata.vdac->num_consumer_supplies = 1; + touchbook_twldata.vdac->consumer_supplies = &touchbook_vdac_supply; + touchbook_twldata.vpll2->constraints.name = "VDVI"; + touchbook_twldata.vpll2->num_consumer_supplies = 1; + touchbook_twldata.vpll2->consumer_supplies = &touchbook_vdvi_supply; + omap3_pmic_init("twl4030", &touchbook_twldata); /* Additional TouchBook bus */ omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index f334829..e3fa177 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -264,14 +264,6 @@ static struct omap_dss_board_info overo_dss_data = { .default_device = &overo_dvi_device, };
-static struct regulator_consumer_supply overo_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -static struct regulator_consumer_supply overo_vdds_dsi_supply[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -447,46 +439,18 @@ static struct regulator_init_data overo_vmmc1 = { .consumer_supplies = &overo_vmmc1_supply, };
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data overo_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &overo_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data overo_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply), - .consumer_supplies = overo_vdds_dsi_supply, -}; - static struct twl4030_platform_data overo_twldata = { .gpio = &overo_gpio_data, .vmmc1 = &overo_vmmc1, - .vdac = &overo_vdac, - .vpll2 = &overo_vpll2, };
static int __init overo_i2c_init(void) { omap3_pmic_get_config(&overo_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0); + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + overo_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("tps65950", &overo_twldata); /* i2c2 pins are used for gpio */ omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index dc69a7f..dfaf874 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -391,10 +391,6 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdd", "2-0063"), };
-static struct regulator_consumer_supply rx51_vdac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - static struct regulator_init_data rx51_vaux1 = { .constraints = { .name = "V28", @@ -511,21 +507,6 @@ static struct regulator_init_data rx51_vsim = { .consumer_supplies = &rx51_vsim_supply, };
-static struct regulator_init_data rx51_vdac = { - .constraints = { - .name = "VDAC", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = rx51_vdac_supply, -}; - static struct regulator_init_data rx51_vio = { .constraints = { .min_uV = 1800000, @@ -778,7 +759,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .vaux4 = &rx51_vaux4, .vmmc1 = &rx51_vmmc1, .vsim = &rx51_vsim, - .vdac = &rx51_vdac, .vio = &rx51_vio, };
@@ -835,7 +815,10 @@ static int __init rx51_i2c_init(void) } rx51_twldata.vmmc2 = &rx51_vmmc2; omap3_pmic_get_config(&rx51_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0); + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, + TWL_COMMON_REGULATOR_VDAC); + rx51_twldata.vdac->constraints.apply_uV = true; + rx51_twldata.vdac->constraints.name = "VDAC"; omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 58c0c6e..8853dc4 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -227,40 +227,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ };
-static struct regulator_consumer_supply zoom_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_consumer_supply zoom_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -static struct regulator_init_data zoom_vpll2 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(zoom_vpll2_supplies), - .consumer_supplies = zoom_vpll2_supplies, -}; - -static struct regulator_init_data zoom_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vdda_dac_supply, -}; - static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -306,15 +272,14 @@ static struct twl4030_platform_data zoom_twldata = { .vmmc1 = &zoom_vmmc1, .vmmc2 = &zoom_vmmc2, .vsim = &zoom_vsim, - .vpll2 = &zoom_vpll2, - .vdac = &zoom_vdac, };
static int __init omap_i2c_init(void) { omap3_pmic_get_config(&zoom_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI | - TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, 0); + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI | + TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
if (machine_is_omap_zoom2()) { struct twl4030_codec_audio_data *audio_data; diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 2487e3c..f15f880 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -87,6 +87,41 @@ static struct twl4030_codec_data omap3_codec_pdata = { .audio = &omap3_audio, };
+static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; + +static struct regulator_init_data omap3_vdac_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3_vdda_dac_supplies), + .consumer_supplies = omap3_vdda_dac_supplies, +}; + +static struct regulator_consumer_supply omap3_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; + +static struct regulator_init_data omap3_vpll2_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3_vpll2_supplies), + .consumer_supplies = omap3_vpll2_supplies, +}; + static struct regulator_init_data omap4_vdac_idata = { .constraints = { .min_uV = 1800000, @@ -259,4 +294,11 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->codec) pmic_data->codec = &omap3_codec_pdata; + + /* Common regulator configurations */ + if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) + pmic_data->vdac = &omap3_vdac_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) + pmic_data->vpll2 = &omap3_vpll2_idata; } diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 3b4b05d..5e83a5b 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -21,6 +21,11 @@ #define TWL_COMMON_REGULATOR_VUSB (1 << 9) #define TWL_COMMON_REGULATOR_CLK32KG (1 << 10)
+/* TWL4030 LDO regulators */ +#define TWL_COMMON_REGULATOR_VPLL1 (1 << 4) +#define TWL_COMMON_REGULATOR_VPLL2 (1 << 5) + + struct twl4030_platform_data;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,