On Wed, 10 Aug 2016, Sylwester Nawrocki wrote:
This patch adds common driver for the Top block of the Samsung Exynos SoC Low Power Audio Subsystem. This is a minimal driver which prepares resources for IP blocks like I2S, audio DMA and UART and exposes a regmap for the Top block registers. Also system power ops are added to ensure the Audio Subsystem is operational after system suspend/resume cycle.
Signed-off-by: Inha Song ideal.song@samsung.com Signed-off-by: Beomho Seo beomho.seo@samsung.com Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com
Changes since v5:
- BIT() used for the register bit macro definitions,
- removed unneeded dev->of_node test,
- exynos_lpass_{suspend,resume} functions compiled-in conditionally,
- added comments for struct exynos_lpass fields.
Changes since v4:
- none.
Changes since v3:
- moved from sound/soc/samsung and rewritten as a MFD driver,
- PMU register definitions moved to include/linux/mfd/syscon/exynos5-pmu.h,
- added regmap for LPASS Top SFR region,
- cleaned up register bit field defintions.
Changes since v2:
- move misplaced SND_SAMSUNG_AUDSS Kconfig symbol addition to this patch.
drivers/mfd/Kconfig | 8 ++ drivers/mfd/Makefile | 1 + drivers/mfd/exynos-lpass.c | 187 +++++++++++++++++++++++++++++++++ include/linux/mfd/syscon/exynos5-pmu.h | 4 +- 4 files changed, 199 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/exynos-lpass.c
Applied, thanks.
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2d1fb64..a7ec890 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -281,6 +281,14 @@ config MFD_DLN2 etc. must be enabled in order to use the functionality of the device.
+config MFD_EXYNOS_LPASS
- tristate "Samsung Exynos SoC Low Power Audio Subsystem"
- select MFD_CORE
- select REGMAP_MMIO
- help
Select this option to enable support for Samsung Exynos Low Power
Audio Subsystem.
config MFD_MC13XXX tristate depends on (SPI_MASTER || I2C) diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 2ba3ba3..41510bb 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o +obj-$(CONFIG_MFD_EXYNOS_LPASS) += exynos-lpass.o
rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o diff --git a/drivers/mfd/exynos-lpass.c b/drivers/mfd/exynos-lpass.c new file mode 100644 index 0000000..578ac7b --- /dev/null +++ b/drivers/mfd/exynos-lpass.c @@ -0,0 +1,187 @@ +/*
- Copyright (C) 2015 - 2016 Samsung Electronics Co., Ltd.
- Authors: Inha Song ideal.song@samsung.com
Sylwester Nawrocki <s.nawrocki@samsung.com>
- Samsung Exynos SoC series Low Power Audio Subsystem driver.
- This module provides regmap for the Top SFR region and instantiates
- devices for IP blocks like DMAC, I2S, UART.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 and
- only version 2 as published by the Free Software Foundation.
- */
+#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/exynos5-pmu.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/types.h>
+/* LPASS Top register definitions */ +#define SFR_LPASS_CORE_SW_RESET 0x08 +#define LPASS_SB_SW_RESET BIT(11) +#define LPASS_UART_SW_RESET BIT(10) +#define LPASS_PCM_SW_RESET BIT(9) +#define LPASS_I2S_SW_RESET BIT(8) +#define LPASS_WDT1_SW_RESET BIT(4) +#define LPASS_WDT0_SW_RESET BIT(3) +#define LPASS_TIMER_SW_RESET BIT(2) +#define LPASS_MEM_SW_RESET BIT(1) +#define LPASS_DMA_SW_RESET BIT(0)
+#define SFR_LPASS_INTR_CA5_MASK 0x48 +#define SFR_LPASS_INTR_CPU_MASK 0x58 +#define LPASS_INTR_APM BIT(9) +#define LPASS_INTR_MIF BIT(8) +#define LPASS_INTR_TIMER BIT(7) +#define LPASS_INTR_DMA BIT(6) +#define LPASS_INTR_GPIO BIT(5) +#define LPASS_INTR_I2S BIT(4) +#define LPASS_INTR_PCM BIT(3) +#define LPASS_INTR_SLIMBUS BIT(2) +#define LPASS_INTR_UART BIT(1) +#define LPASS_INTR_SFR BIT(0)
+struct exynos_lpass {
- /* pointer to the Power Management Unit regmap */
- struct regmap *pmu;
- /* pointer to the LPASS TOP regmap */
- struct regmap *top;
+};
+static void exynos_lpass_core_sw_reset(struct exynos_lpass *lpass, int mask) +{
- unsigned int val = 0;
- regmap_read(lpass->top, SFR_LPASS_CORE_SW_RESET, &val);
- val &= ~mask;
- regmap_write(lpass->top, SFR_LPASS_CORE_SW_RESET, val);
- usleep_range(100, 150);
- val |= mask;
- regmap_write(lpass->top, SFR_LPASS_CORE_SW_RESET, val);
+}
+static void exynos_lpass_enable(struct exynos_lpass *lpass) +{
- /* Unmask SFR, DMA and I2S interrupt */
- regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK,
LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S);
- regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK,
LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S);
- /* Activate related PADs from retention state */
- regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION,
EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR);
- exynos_lpass_core_sw_reset(lpass, LPASS_I2S_SW_RESET);
- exynos_lpass_core_sw_reset(lpass, LPASS_DMA_SW_RESET);
- exynos_lpass_core_sw_reset(lpass, LPASS_MEM_SW_RESET);
+}
+static void exynos_lpass_disable(struct exynos_lpass *lpass) +{
- /* Mask any unmasked IP interrupt sources */
- regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK, 0);
- regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK, 0);
- /* Deactivate related PADs from retention state */
- regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION, 0);
+}
+static const struct regmap_config exynos_lpass_reg_conf = {
- .reg_bits = 32,
- .reg_stride = 4,
- .val_bits = 32,
- .max_register = 0xfc,
- .fast_io = true,
+};
+static int exynos_lpass_probe(struct platform_device *pdev) +{
- struct device *dev = &pdev->dev;
- struct exynos_lpass *lpass;
- void __iomem *base_top;
- struct resource *res;
- lpass = devm_kzalloc(dev, sizeof(*lpass), GFP_KERNEL);
- if (!lpass)
return -ENOMEM;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base_top = devm_ioremap_resource(dev, res);
- if (IS_ERR(base_top))
return PTR_ERR(base_top);
- lpass->top = regmap_init_mmio(dev, base_top,
&exynos_lpass_reg_conf);
- if (IS_ERR(lpass->top)) {
dev_err(dev, "LPASS top regmap initialization failed\n");
return PTR_ERR(lpass->top);
- }
- lpass->pmu = syscon_regmap_lookup_by_phandle(dev->of_node,
"samsung,pmu-syscon");
- if (IS_ERR(lpass->pmu)) {
dev_err(dev, "Failed to lookup PMU regmap\n");
return PTR_ERR(lpass->pmu);
- }
- platform_set_drvdata(pdev, lpass);
- exynos_lpass_enable(lpass);
- return of_platform_populate(dev->of_node, NULL, NULL, dev);
+}
+#ifdef CONFIG_PM_SLEEP +static int exynos_lpass_suspend(struct device *dev) +{
- struct exynos_lpass *lpass = dev_get_drvdata(dev);
- exynos_lpass_disable(lpass);
- return 0;
+}
+static int exynos_lpass_resume(struct device *dev) +{
- struct exynos_lpass *lpass = dev_get_drvdata(dev);
- exynos_lpass_enable(lpass);
- return 0;
+} +#endif
+static SIMPLE_DEV_PM_OPS(lpass_pm_ops, exynos_lpass_suspend,
exynos_lpass_resume);
+static const struct of_device_id exynos_lpass_of_match[] = {
- { .compatible = "samsung,exynos5433-lpass" },
- { },
+}; +MODULE_DEVICE_TABLE(of, exynos_lpass_of_match);
+static struct platform_driver exynos_lpass_driver = {
- .driver = {
.name = "exynos-lpass",
.pm = &lpass_pm_ops,
.of_match_table = exynos_lpass_of_match,
- },
- .probe = exynos_lpass_probe,
+}; +module_platform_driver(exynos_lpass_driver);
+MODULE_DESCRIPTION("Samsung Low Power Audio Subsystem driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h index 76f30f9..c28ff21 100644 --- a/include/linux/mfd/syscon/exynos5-pmu.h +++ b/include/linux/mfd/syscon/exynos5-pmu.h @@ -43,8 +43,10 @@ #define EXYNOS5433_MIPI_PHY2_CONTROL (0x718)
#define EXYNOS5_PHY_ENABLE BIT(0)
#define EXYNOS5_MIPI_PHY_S_RESETN BIT(1) #define EXYNOS5_MIPI_PHY_M_RESETN BIT(2)
+#define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028) +#define EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR BIT(28)
#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */