On Thu, Sep 8, 2011 at 6:45 AM, David Jander david.jander@protonic.nl wrote:
Dear Jon,
Thanks for replying so quickly.
On Thu, 8 Sep 2011 06:28:02 -0400 "jonsmirl@gmail.com" jonsmirl@gmail.com wrote:
On Thu, Sep 8, 2011 at 6:16 AM, David Jander david.jander@protonic.nl wrote:
Dear Jon,
Here's the device tree... http://git.digispeaker.com/?p=digispeaker-kernel.git;a=blob;f=arch/powerpc/b...
Thanks... but it uses I2S, not AC97 :-( It doesn't have a "fsl,mpc5200-pcm" node either, btw. In the case of I2C, this makes some sense, since the Codec is usually connected to two different interfaces at the same time (I2S and I2C for control), so you have 2 device nodes. AC97 OTOH has just one interface. It is connected to a AC97 bus (a PSC in this case). AFAICS there are no OF bindings yet for an AC97 bus, so the actual codec doesn't figure and thus still needs this ugly fabric driver thing.
Try the pcm030 device tree...
http://git.digispeaker.com/?p=digispeaker-kernel.git;a=blob;f=arch/powerpc/b...
I think it is checked into the kernel.
Grant can comment on the current bindings.
Ok.
Best regards,
-- David Jander Protonic Holland.