On 2016.08.29 at 10:39 +0200, Takashi Iwai wrote:
On Mon, 29 Aug 2016 10:33:34 +0200, Markus Trippelsdorf wrote:
On 2016.08.29 at 10:15 +0200, Takashi Iwai wrote:
On Sat, 27 Aug 2016 13:39:08 +0200, Markus Trippelsdorf wrote:
On 2016.08.27 at 11:50 +0200, Markus Trippelsdorf wrote:
Hi,
since several kernel releases I get no sound for several minutes after reboot. After this delay it starts working normally.
Is this some kind of speaker protection? Is there a parameter that I can set to get sound immediately?
% aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: VT1708S Analog [VT1708S Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: SB [HDA ATI SB], device 3: VT1708S Digital [VT1708S Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: Generic Digital [Generic Digital] Subdevices: 1/1 Subdevice #0: subdevice #0
card 0, device 3 [VT1708S Digital] is the device that I use. It is a TOSLINK-S/PDIF link to my DAC.
Here is the diff (bad (after reboot) vs. good (after a few minutes)):
@@ -121,7 +121,7 @@ Control: name="Surround Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
- Amp-Out vals: [0x1c 0x1c]
- Amp-Out vals: [0x26 0x26] Converter: stream=0, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000
@@ -174,12 +174,12 @@ bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3
- Power: setting=D0, actual=D0
- Power: setting=D3, actual=D3 Connection: 1 0x1e
So this looks like the only significant change. Others are about the volume level, and should lead to the complete mute.
Could you try to adjust the power state manually while it happens?
hda-verb /dev/snd/hwC0D0 0xXX SET_POWER 0x00
where 0xXX is filled with the node number of this widget.
BTW, at the next time, take a diff with -p option. This will show the node ID in the diff.
Hmm, I have no /dev/snd/hwC0D0:
Build your kernel with CONFIG_SND_HDA_HWDEP=y.
@@ -174,12 +174,12 @@ Node 0x14 [Audio Input] wcaps 0x10051b: bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3
- Power: setting=D0, actual=D0
- Power: setting=D3, actual=D3
So it's 0x14.
Thanks.
Unfortunately running: hda-verb /dev/snd/hwC0D0 0x14 SET_POWER 0x00 has no effect.