On Wed, 28 Oct 2009 08:53:34 +0200 Eero Nurkkala ext-eero.nurkkala@nokia.com wrote:
On Wed, 2009-10-28 at 06:52 +0100, Ujfalusi Peter (Nokia-D/Tampere)
Yeah, but I think this locking issue has nothing to do with SMP safe or not. On playback start in omap_mcbsp_request the mcbsp->free is cleared. Further modification to the dma_op_mode in dma_op_mode_store is not allowed if the mcbsp port is in use, thus the dma_op_mode is protected against change while the port is in use (ensuring that the mode is same in omap34xx_mcbsp_request and omap_mcbsp_get_dma_op_mode functions). This alone makes the use of spinlock around the dma_op_mode unnecessary.
...
Right, I reviewed the code, and it was first looking really bad at sound/soc/omap/omap-mcbsp.c, where it calls omap_mcbsp_get_dma_op_mode() from different places. However, it's not an issue because in: arch/arm/plat-omap/mcbsp.c : dma_op_mode_store(), the dma_op_mode is written only if the mcbsp is unoccupied. So it is SMP safe.
...
The spinlocks are unnecessary. In the above example, you get the same with just "return mcbsp->dma_op_mode;"
-> Peter's patch is a good cleanup.
Yeah, agree, only now I looked the patch itself :-)
Sorry that I didn't express it clearly that my comment was a side note for general awareness that SMP's are becoming reality for ARMs as well than nak for Peter's patch.
According to defconfigs the OMAP4 will be the first commercial ARM SMP having mainline support (I count realview as development device):
grep 'CONFIG_SMP=y' -r arch/arm/configs/ arch/arm/configs/realview-smp_defconfig:CONFIG_SMP=y arch/arm/configs/omap_4430sdp_defconfig:CONFIG_SMP=y