From: Steffen Aschbacher steffen.aschbacher@stihl.de
When the 'ti,gpio-config' property is not defined, the device_property_count_u32() will return an error, rather than zero.
The current check, only handles a return value of zero, which assumes that the property is defined and has no elements.
This change extends the check to also handle for an error case (most likely to be hit by the case that the 'ti,gpio-config' is not defined). Semantically, this would be the same as 'device_property_count_u32()' returning zero.
In case that 'ti,gpio-config' is defined, and returns a 'gpio_count' value that is incorrect, there is an 'if (gpio_count != ADCX140_NUM_GPIO_CFGS)' check, a few lines lower that will return -EINVAL. This means that someone tried to define 'ti,gpio-config', but with the wrong number of GPIOs.
Signed-off-by: Steffen Aschbacher steffen.aschbacher@stihl.de Signed-off-by: Alexandru Ardelean alex@shruggie.ro --- sound/soc/codecs/tlv320adcx140.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c index 91a22d927915..530f321d08e9 100644 --- a/sound/soc/codecs/tlv320adcx140.c +++ b/sound/soc/codecs/tlv320adcx140.c @@ -925,7 +925,7 @@ static int adcx140_configure_gpio(struct adcx140_priv *adcx140)
gpio_count = device_property_count_u32(adcx140->dev, "ti,gpio-config"); - if (gpio_count == 0) + if (gpio_count <= 0) return 0;
if (gpio_count != ADCX140_NUM_GPIO_CFGS)