-----Original Message----- From: alsa-devel-bounces@alsa-project.org [mailto:alsa-devel-bounces@alsa- project.org] On Behalf Of Takashi Iwai Sent: Friday, March 24, 2017 11:38 AM To: Kp, Jeeja jeeja.kp@intel.com Cc: alsa-devel@alsa-project.org; R, Dharageswari dharageswari.r@intel.com; Patches Audio patches.audio@intel.com; Shah, Hardik T hardik.t.shah@intel.com; broonie@kernel.org; Girdwood, Liam R liam.r.girdwood@intel.com Subject: Re: [alsa-devel] [PATCH v2 09/11] ASoC: Intel: Skylake: Fix DMA position reporting for capture stream
On Fri, 24 Mar 2017 18:40:32 +0100, jeeja.kp@intel.com wrote:
From: Hardik T Shah hardik.t.shah@intel.com
As per hardware recommendation, for every capture stream completion following operations need to be done in order to reflect the actual data that is received in position buffer.
- Wait for 20us before reading the DMA position in buffer once the
interrupt is generated for stream completion. 2. Read any of the register to flush the DMA position value. This is dummy read operation.
Are these workarounds needed for the legacy driver? If yes, which chips require it?
Yes, these are needed in legacy driver as well.
From SKL and BXT onwards, it is needed.
thanks,
Takashi
Signed-off-by: Dharageswari R dharageswari.r@intel.com Signed-off-by: Hardik T Shah hardik.t.shah@intel.com Signed-off-by: Jeeja KP jeeja.kp@intel.com
sound/soc/intel/skylake/skl-pcm.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-pcm.c
b/sound/soc/intel/skylake/skl-pcm.c
index ef440d8..1823197 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -21,6 +21,7 @@
#include <linux/pci.h> #include <linux/pm_runtime.h> +#include <linux/delay.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include "skl.h" @@ -1063,13 +1064,31 @@ static snd_pcm_uframes_t
skl_platform_pcm_pointer
* HAD space reflects the actual data that is transferred. * Use the position buffer for capture, as DPIB write gets * completed earlier than the actual data written to the DDR.
** For capture stream following workaround is required to fix the* incorrect position reporting.** 1. Wait for 20us before reading the DMA position in buffer once* the interrupt is generated for stream completion as update happens* on the HDA frame boundary i.e. 20.833uSec.* 2. Read DPIB register to flush the DMA position value. This dummy* read is required to flush DMA position value.* 3. Read the DMA Position-in-Buffer. This value now will be equal to* or greater than period boundary.
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { pos = readl(ebus->bus.remap_addr +
AZX_REG_VS_SDXDPIB_XBASE +
(AZX_REG_VS_SDXDPIB_XINTERVAL * hdac_stream(hstream)->index));
- else
- } else {
udelay(20);readl(ebus->bus.remap_addr +AZX_REG_VS_SDXDPIB_XBASE +(AZX_REG_VS_SDXDPIB_XINTERVAL *hdac_stream(hstream)->index));snd_hdac_stream_get_pos_posbuf(hdac_stream(hstream));
}
if (pos >= hdac_stream(hstream)->bufsize) pos = 0;
-- 2.5.0
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel