The 'msp' board file does more than just register MSP devices. It also registers some other components necessary to get audio working on ux500 based platforms; such as the PCM and Machine Drivers. For that reason we're changing the filename to be more encompassing - 'audio'.
Acked-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Lee Jones lee.jones@linaro.org --- arch/arm/mach-ux500/Makefile | 2 +- arch/arm/mach-ux500/board-mop500-audio.c | 199 ++++++++++++++++++++++++++++++ arch/arm/mach-ux500/board-mop500-msp.c | 199 ------------------------------ arch/arm/mach-ux500/board-mop500.c | 12 +- arch/arm/mach-ux500/board-mop500.h | 4 +- 5 files changed, 208 insertions(+), 208 deletions(-) create mode 100644 arch/arm/mach-ux500/board-mop500-audio.c delete mode 100644 arch/arm/mach-ux500/board-mop500-msp.c
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 026086f..1dc2cfa 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -12,6 +12,6 @@ obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-uib.o board-mop500-stuib.o \ board-mop500-u8500uib.o \ board-mop500-pins.o \ - board-mop500-msp.o + board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c new file mode 100644 index 0000000..18f6c5a --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -0,0 +1,199 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/pinctrl/consumer.h> + +#include <plat/gpio-nomadik.h> +#include <plat/pincfg.h> +#include <plat/ste_dma40.h> + +#include <mach/devices.h> +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/msp.h> + +#include "ste-dma40-db8500.h" +#include "board-mop500.h" +#include "devices-db8500.h" +#include "pins-db8500.h" + +static struct stedma40_chan_cfg msp0_dma_rx = { + .high_priority = true, + .dir = STEDMA40_PERIPH_TO_MEM, + + .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +static struct stedma40_chan_cfg msp0_dma_tx = { + .high_priority = true, + .dir = STEDMA40_MEM_TO_PERIPH, + + .src_dev_type = STEDMA40_DEV_DST_MEMORY, + .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +struct msp_i2s_platform_data msp0_platform_data = { + .id = MSP_I2S_0, + .msp_i2s_dma_rx = &msp0_dma_rx, + .msp_i2s_dma_tx = &msp0_dma_tx, +}; + +static struct stedma40_chan_cfg msp1_dma_rx = { + .high_priority = true, + .dir = STEDMA40_PERIPH_TO_MEM, + + .src_dev_type = DB8500_DMA_DEV30_MSP3_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +static struct stedma40_chan_cfg msp1_dma_tx = { + .high_priority = true, + .dir = STEDMA40_MEM_TO_PERIPH, + + .src_dev_type = STEDMA40_DEV_DST_MEMORY, + .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +struct msp_i2s_platform_data msp1_platform_data = { + .id = MSP_I2S_1, + .msp_i2s_dma_rx = NULL, + .msp_i2s_dma_tx = &msp1_dma_tx, +}; + +static struct stedma40_chan_cfg msp2_dma_rx = { + .high_priority = true, + .dir = STEDMA40_PERIPH_TO_MEM, + + .src_dev_type = DB8500_DMA_DEV14_MSP2_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + + /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */ + .src_info.psize = STEDMA40_PSIZE_LOG_1, + .dst_info.psize = STEDMA40_PSIZE_LOG_1, + + /* data_width is set during configuration */ +}; + +static struct stedma40_chan_cfg msp2_dma_tx = { + .high_priority = true, + .dir = STEDMA40_MEM_TO_PERIPH, + + .src_dev_type = STEDMA40_DEV_DST_MEMORY, + .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + .use_fixed_channel = true, + .phy_channel = 1, + + /* data_width is set during configuration */ +}; + +static struct platform_device *db8500_add_msp_i2s(struct device *parent, + int id, + resource_size_t base, int irq, + struct msp_i2s_platform_data *pdata) +{ + struct platform_device *pdev; + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_4K), + DEFINE_RES_IRQ(irq), + }; + + pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n", + id, irq); + pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); + if (!pdev) { + pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n", + id); + return NULL; + } + + return pdev; +} + +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", + .id = 0, + .dev = { + .platform_data = NULL, + }, +}; + +/* Platform device for Ux500-PCM */ +static struct platform_device ux500_pcm = { + .name = "ux500-pcm", + .id = 0, + .dev = { + .platform_data = NULL, + }, +}; + +struct msp_i2s_platform_data msp2_platform_data = { + .id = MSP_I2S_2, + .msp_i2s_dma_rx = &msp2_dma_rx, + .msp_i2s_dma_tx = &msp2_dma_tx, +}; + +struct msp_i2s_platform_data msp3_platform_data = { + .id = MSP_I2S_3, + .msp_i2s_dma_rx = &msp1_dma_rx, + .msp_i2s_dma_tx = NULL, +}; + +void mop500_audio_init(struct device *parent) +{ + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); + + pr_info("Initialize MSP I2S-devices.\n"); + db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, + &msp0_platform_data); + db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, + &msp1_platform_data); + db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, + &msp2_platform_data); + db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, + &msp3_platform_data); + + pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); + platform_device_register(&ux500_pcm); +} + +/* Due for removal once the MSP driver has been fully DT:ed. */ +void mop500_of_audio_init(struct device *parent) +{ + pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); + platform_device_register(&ux500_pcm); +} diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c deleted file mode 100644 index 2af017f..0000000 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL), version 2 - */ - -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/pinctrl/consumer.h> - -#include <plat/gpio-nomadik.h> -#include <plat/pincfg.h> -#include <plat/ste_dma40.h> - -#include <mach/devices.h> -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/msp.h> - -#include "ste-dma40-db8500.h" -#include "board-mop500.h" -#include "devices-db8500.h" -#include "pins-db8500.h" - -static struct stedma40_chan_cfg msp0_dma_rx = { - .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, - - .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ -}; - -static struct stedma40_chan_cfg msp0_dma_tx = { - .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, - - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ -}; - -struct msp_i2s_platform_data msp0_platform_data = { - .id = MSP_I2S_0, - .msp_i2s_dma_rx = &msp0_dma_rx, - .msp_i2s_dma_tx = &msp0_dma_tx, -}; - -static struct stedma40_chan_cfg msp1_dma_rx = { - .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, - - .src_dev_type = DB8500_DMA_DEV30_MSP3_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ -}; - -static struct stedma40_chan_cfg msp1_dma_tx = { - .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, - - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ -}; - -struct msp_i2s_platform_data msp1_platform_data = { - .id = MSP_I2S_1, - .msp_i2s_dma_rx = NULL, - .msp_i2s_dma_tx = &msp1_dma_tx, -}; - -static struct stedma40_chan_cfg msp2_dma_rx = { - .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, - - .src_dev_type = DB8500_DMA_DEV14_MSP2_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - - /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */ - .src_info.psize = STEDMA40_PSIZE_LOG_1, - .dst_info.psize = STEDMA40_PSIZE_LOG_1, - - /* data_width is set during configuration */ -}; - -static struct stedma40_chan_cfg msp2_dma_tx = { - .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, - - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - .use_fixed_channel = true, - .phy_channel = 1, - - /* data_width is set during configuration */ -}; - -static struct platform_device *db8500_add_msp_i2s(struct device *parent, - int id, - resource_size_t base, int irq, - struct msp_i2s_platform_data *pdata) -{ - struct platform_device *pdev; - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - DEFINE_RES_IRQ(irq), - }; - - pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n", - id, irq); - pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); - if (!pdev) { - pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n", - id); - return NULL; - } - - return pdev; -} - -/* Platform device for ASoC MOP500 machine */ -static struct platform_device snd_soc_mop500 = { - .name = "snd-soc-mop500", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - -/* Platform device for Ux500-PCM */ -static struct platform_device ux500_pcm = { - .name = "ux500-pcm", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - -struct msp_i2s_platform_data msp2_platform_data = { - .id = MSP_I2S_2, - .msp_i2s_dma_rx = &msp2_dma_rx, - .msp_i2s_dma_tx = &msp2_dma_tx, -}; - -struct msp_i2s_platform_data msp3_platform_data = { - .id = MSP_I2S_3, - .msp_i2s_dma_rx = &msp1_dma_rx, - .msp_i2s_dma_tx = NULL, -}; - -/* Due for removal once the MSP driver has been fully DT:ed. */ -void mop500_of_msp_init(struct device *parent) -{ - pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); - platform_device_register(&ux500_pcm); -} - -void mop500_msp_init(struct device *parent) -{ - pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); - platform_device_register(&snd_soc_mop500); - - pr_info("Initialize MSP I2S-devices.\n"); - db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, - &msp0_platform_data); - db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, - &msp1_platform_data); - db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, - &msp2_platform_data); - db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, - &msp3_platform_data); - - pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); - platform_device_register(&ux500_pcm); -} diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 0c141d5..7152635 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -607,7 +607,7 @@ static void __init mop500_init_machine(void) mop500_i2c_init(parent); mop500_sdi_init(parent); mop500_spi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); mop500_uart_init(parent);
u8500_cryp1_hash1_init(parent); @@ -641,7 +641,7 @@ static void __init snowball_init_machine(void) mop500_i2c_init(parent); snowball_sdi_init(parent); mop500_spi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); mop500_uart_init(parent);
/* This board has full regulator constraints */ @@ -673,7 +673,7 @@ static void __init hrefv60_init_machine(void) mop500_i2c_init(parent); hrefv60_sdi_init(parent); mop500_spi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); mop500_uart_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -807,7 +807,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs));
mop500_sdi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -816,7 +816,7 @@ static void __init u8500_init_machine(void) mop500_uib_init();
} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { - mop500_of_msp_init(parent); + mop500_of_audio_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -828,7 +828,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs));
hrefv60_sdi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 3fbf48f..9e9dd5a 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -97,9 +97,9 @@ void __init mop500_stuib_init(void); void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); -void mop500_msp_init(struct device *parent); +void mop500_audio_init(struct device *parent); /* Due for removal once the MSP driver has been fully DT:ed. */ -void mop500_of_msp_init(struct device *parent); +void mop500_of_audio_init(struct device *parent);
int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,