From: Camel Guo camelg@axis.com
Add setup of bclk-to-ws ratio and sample rate when in master mode, as well as MCLK input pin setup.
Limitations:
- MCLK is assumed to be connected to GPIO1 (other possible choices would be GPI0..3 if they weren't used for analog positive inputs). - PLL is always enabled, and clock generation is in automatic mode.
Signed-off-by: Camel Guo camelg@axis.com --- sound/soc/codecs/tlv320adcx140.c | 134 ++++++++++++++++++++++++++++++- sound/soc/codecs/tlv320adcx140.h | 35 ++++++++ 2 files changed, 165 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c index 13ece039e9fe..f143b6b62f84 100644 --- a/sound/soc/codecs/tlv320adcx140.c +++ b/sound/soc/codecs/tlv320adcx140.c @@ -35,6 +35,7 @@ struct adcx140_priv { unsigned int dai_fmt; unsigned int tdm_delay; unsigned int slot_width; + int master; };
static const char * const gpo_config_names[] = { @@ -614,12 +615,85 @@ static int adcx140_reset(struct adcx140_priv *adcx140) return ret; }
+static int adcx140_fs_bclk_ratio(unsigned int bclk_ratio) +{ + switch (bclk_ratio) { + case 16: + return ADCX140_RATIO_16; + case 24: + return ADCX140_RATIO_24; + case 32: + return ADCX140_RATIO_32; + case 48: + return ADCX140_RATIO_48; + case 64: + return ADCX140_RATIO_64; + case 96: + return ADCX140_RATIO_96; + case 128: + return ADCX140_RATIO_128; + case 192: + return ADCX140_RATIO_192; + case 256: + return ADCX140_RATIO_256; + case 384: + return ADCX140_RATIO_384; + case 512: + return ADCX140_RATIO_512; + case 1024: + return ADCX140_RATIO_1024; + case 2048: + return ADCX140_RATIO_2048; + default: + break; + } + return -EINVAL; +} + +static int adcx140_fs_rate(unsigned int rate) +{ + switch (rate) { + case 7350: + case 8000: + return ADCX140_8_OR_7_35KHZ; + case 14700: + case 16000: + return ADCX140_16_OR_14_7KHZ; + case 22050: + case 24000: + return ADCX140_24_OR_22_05KHZ; + case 29400: + case 32000: + return ADCX140_32_OR_29_4KHZ; + case 44100: + case 48000: + return ADCX140_48_OR_44_1KHZ; + case 88200: + case 96000: + return ADCX140_96_OR_88_2KHZ; + case 176400: + case 192000: + return ADCX140_192_OR_176_4KHZ; + case 352800: + case 384000: + return ADCX140_384_OR_352_8KHZ; + case 705600: + case 768000: + return ADCX140_768_OR_705_6KHZ; + default: + break; + } + return -EINVAL; +} + static int adcx140_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { struct snd_soc_component *component = dai->component; + struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component); u8 data = 0; + u8 mst_cfg0 = 0;
switch (params_width(params)) { case 16: @@ -640,6 +714,60 @@ static int adcx140_hw_params(struct snd_pcm_substream *substream, return -EINVAL; }
+ if (adcx140->master) { + u8 mst_cfg1 = 0; + u8 gpio_cfg0 = 0; + unsigned int bclk_ratio; + int ret; + + mst_cfg0 = ADCX140_MST_SLV_CFG_BIT; + if (params_rate(params) % 1000) + mst_cfg0 |= ADCX140_FS_MODE_BIT; /* 44.1 kHz et al */ + + ret = adcx140_fs_rate(params_rate(params)); + if (ret < 0) { + dev_err(component->dev, "%s: Unsupported rate %d\n", + __func__, params_rate(params)); + return ret; + } + mst_cfg1 |= ret; + + /* In slave mode when using automatic clock configuration, + * the codec figures out the BCLK to FSYNC ratio itself. But + * here in master mode, we need to tell it. + */ + + bclk_ratio = snd_soc_params_to_frame_size(params); + ret = adcx140_fs_bclk_ratio(bclk_ratio); + if (ret < 0) { + dev_err(component->dev, "%s: Unsupported bclk_ratio %d\n", + __func__, bclk_ratio); + return ret; + } + mst_cfg1 |= ret; + + /* The codec can receive MCLK on any input: GPIO, GPI0..3. + * While in future it would be nice to have these selectable + * via clk_id for instance, for now we fix GPIO1 as the MCLK + * source. + */ + gpio_cfg0 |= ADCX140_GPIO1_MCLK; + + snd_soc_component_update_bits(component, ADCX140_MST_CFG1, + ADCX140_FS_RATE_MSK | + ADCX140_RATIO_MSK, + mst_cfg1); + + snd_soc_component_update_bits(component, ADCX140_GPIO_CFG0, + ADCX140_GPIO1_CFG_MSK, + gpio_cfg0); + } + + snd_soc_component_update_bits(component, ADCX140_MST_CFG0, + ADCX140_FS_MODE_BIT | + ADCX140_MST_SLV_CFG_BIT, + mst_cfg0); + snd_soc_component_update_bits(component, ADCX140_ASI_CFG0, ADCX140_WORD_LEN_MSK, data);
@@ -652,16 +780,16 @@ static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai, struct snd_soc_component *component = codec_dai->component; struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component); u8 iface_reg1 = 0; - u8 iface_reg2 = 0; int offset = 0; int width = adcx140->slot_width;
/* set master/slave audio interface */ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: - iface_reg2 |= ADCX140_BCLK_FSYNC_MASTER; + adcx140->master = 1; break; case SND_SOC_DAIFMT_CBS_CFS: + adcx140->master = 0; break; case SND_SOC_DAIFMT_CBS_CFM: case SND_SOC_DAIFMT_CBM_CFS: @@ -714,8 +842,6 @@ static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai, ADCX140_BCLKINV_BIT | ADCX140_ASI_FORMAT_MSK, iface_reg1); - snd_soc_component_update_bits(component, ADCX140_MST_CFG0, - ADCX140_BCLK_FSYNC_MASTER, iface_reg2);
/* Configure data offset */ snd_soc_component_update_bits(component, ADCX140_ASI_CFG1, diff --git a/sound/soc/codecs/tlv320adcx140.h b/sound/soc/codecs/tlv320adcx140.h index eedbc1d7221f..bac34800b189 100644 --- a/sound/soc/codecs/tlv320adcx140.h +++ b/sound/soc/codecs/tlv320adcx140.h @@ -145,4 +145,39 @@ #define ADCX140_GPO_CFG_MAX 4 #define ADCX140_GPO_DRV_MAX 5
+/* MST_CFG0 */ +#define ADCX140_MST_SLV_CFG_BIT BIT(7) +#define ADCX140_FS_MODE_BIT BIT(3) + +/* MST_CFG1 */ +#define ADCX140_8_OR_7_35KHZ (0 << 4) +#define ADCX140_16_OR_14_7KHZ (1 << 4) +#define ADCX140_24_OR_22_05KHZ (2 << 4) +#define ADCX140_32_OR_29_4KHZ (3 << 4) +#define ADCX140_48_OR_44_1KHZ (4 << 4) +#define ADCX140_96_OR_88_2KHZ (5 << 4) +#define ADCX140_192_OR_176_4KHZ (6 << 4) +#define ADCX140_384_OR_352_8KHZ (7 << 4) +#define ADCX140_768_OR_705_6KHZ (8 << 4) +#define ADCX140_FS_RATE_MSK GENMASK(7, 4) + +#define ADCX140_RATIO_16 0 +#define ADCX140_RATIO_24 1 +#define ADCX140_RATIO_32 2 +#define ADCX140_RATIO_48 3 +#define ADCX140_RATIO_64 4 +#define ADCX140_RATIO_96 5 +#define ADCX140_RATIO_128 6 +#define ADCX140_RATIO_192 7 +#define ADCX140_RATIO_256 8 +#define ADCX140_RATIO_384 9 +#define ADCX140_RATIO_512 10 +#define ADCX140_RATIO_1024 11 +#define ADCX140_RATIO_2048 12 +#define ADCX140_RATIO_MSK GENMASK(3, 0) + +/* GPIO_CFG0 */ +#define ADCX140_GPIO1_MCLK (10 << 4) +#define ADCX140_GPIO1_CFG_MSK GENMASK(7, 4) + #endif /* _TLV320ADCX140_ */