The usb_control_msg_send() call can handle data on the stack, as well as returning an error if a "short" write happens, so move the driver over to using that call instead. This ends up removing a helper function that is no longer needed.
Cc: Jaroslav Kysela perex@perex.cz Cc: Takashi Iwai tiwai@suse.com Cc: alsa-devel@alsa-project.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/usb/usx2y/us122l.c | 42 ++++++++-------------------------------- 1 file changed, 8 insertions(+), 34 deletions(-)
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c index f86f7a61fb36..e5c5a0d03d8a 100644 --- a/sound/usb/usx2y/us122l.c +++ b/sound/usb/usx2y/us122l.c @@ -82,40 +82,13 @@ static int us144_create_usbmidi(struct snd_card *card) &US122L(card)->midi_list, &quirk); }
-/* - * Wrapper for usb_control_msg(). - * Allocates a temp buffer to prevent dmaing from/to the stack. - */ -static int us122l_ctl_msg(struct usb_device *dev, unsigned int pipe, - __u8 request, __u8 requesttype, - __u16 value, __u16 index, void *data, - __u16 size, int timeout) -{ - int err; - void *buf = NULL; - - if (size > 0) { - buf = kmemdup(data, size, GFP_KERNEL); - if (!buf) - return -ENOMEM; - } - err = usb_control_msg(dev, pipe, request, requesttype, - value, index, buf, size, timeout); - if (size > 0) { - memcpy(data, buf, size); - kfree(buf); - } - return err; -} - static void pt_info_set(struct usb_device *dev, u8 v) { int ret;
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - 'I', - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - v, 0, NULL, 0, 1000); + ret = usb_control_msg_send(dev, 0, 'I', + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + v, 0, NULL, 0, 1000); snd_printdd(KERN_DEBUG "%i\n", ret); }
@@ -305,10 +278,11 @@ static int us122l_set_sample_rate(struct usb_device *dev, int rate) data[0] = rate; data[1] = rate >> 8; data[2] = rate >> 16; - err = us122l_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR, - USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT, - UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, data, 3, 1000); - if (err < 0) + err = usb_control_msg_send(dev, 0, UAC_SET_CUR, + USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT, + UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, data, 3, + 1000); + if (err) snd_printk(KERN_ERR "%d: cannot set freq %d to ep 0x%x\n", dev->devnum, rate, ep); return err;