On Tue, Apr 21, 2015 at 01:11:44PM +0900, Inha Song wrote:
This patch add support for select accessory detect mode to HPDETL or HPDETR. Arizona provides a headphone detection circuit on the HPDETL and HPDETR pins to measure the impedance of an external load connected to the headphone.
Depending on board design, headphone detect pins can change to HPDETR or HPDETL.
Signed-off-by: Inha Song ideal.song@samsung.com
drivers/extcon/extcon-arizona.c | 28 ++++++++++++++++++++-------- include/dt-bindings/mfd/arizona.h | 8 ++++++++ include/linux/mfd/arizona/pdata.h | 3 +++ 3 files changed, 31 insertions(+), 8 deletions(-) create mode 100644 include/dt-bindings/mfd/arizona.h
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 63f01c4..c827342 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -32,13 +32,10 @@ #include <linux/mfd/arizona/core.h> #include <linux/mfd/arizona/pdata.h> #include <linux/mfd/arizona/registers.h> +#include <dt-bindings/mfd/arizona.h>
#define ARIZONA_MAX_MICD_RANGE 8
-#define ARIZONA_ACCDET_MODE_MIC 0 -#define ARIZONA_ACCDET_MODE_HPL 1 -#define ARIZONA_ACCDET_MODE_HPR 2
#define ARIZONA_MICD_CLAMP_MODE_JDL 0x4 #define ARIZONA_MICD_CLAMP_MODE_JDH 0x5 #define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9 @@ -653,9 +650,9 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info) ret = regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, ARIZONA_ACCDET_MODE_MASK,
ARIZONA_ACCDET_MODE_HPL);
if (ret != 0) {arizona->pdata.hpdet_channel);
dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
goto err; }dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
@@ -705,9 +702,9 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info) ARIZONA_ACCESSORY_DETECT_MODE_1, ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK, info->micd_modes[0].src |
ARIZONA_ACCDET_MODE_HPL);
if (ret != 0) {arizona->pdata.hpdet_channel);
dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
goto err; }dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
@@ -1103,6 +1100,16 @@ static void arizona_micd_set_level(struct arizona *arizona, int index, regmap_update_bits(arizona->regmap, reg, mask, level); }
+static int arizona_extcon_of_get_pdata(struct arizona *arizona) +{
- struct arizona_pdata *pdata = &arizona->pdata;
- of_property_read_u32(arizona->dev->of_node, "wlf,hpdet-channel",
&pdata->hpdet_channel);
I think we need to verify this is either HPL or HPR and default it to HPL if isn't one of those. Otherwise this looks fine.
Thanks, Charles