Dne 6.3.2015 v 11:35 Srinivasan S napsal(a):
Once again many Thanks for the quick responses,
Could you please try & let me know whether does it works viceversa ie., arecord on loopback card first & then aplay on the loopback card as shown below
$ arecord -D plughw:3,1,0 -f dat -c 1 a.wav Recording WAVE 'a.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
$ aplay -D plughw:3,0,0 a.wav Playing WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
Awaiting for your replies,
I'm not sure, if you understand the purpose of the loopback card. It just passes the data from one playback device to another capture device so it returns them to the userspace. So you need to have an input (source) to be loopbacked. You're probably trying to loopback the zero (silence) samples which are provided when the source is not available from the loopback card.
You cannot do (simple notation):
arecord Loopback,1 | aplay Loopback,0
it's endless silence loop, but you can do (both commands should be executed at same time):
aplay Loopback,0 <some_wav_file_with_real_content> arecord Loopback,1 <loopbacked_result_stored_to_wav>
Jaroslav
Thanks in advance again. Srinivasan S
From: Jaroslav Kysela perex@perex.cz Sent: Friday, March 6, 2015 12:21 AM To: Srinivasan S Cc: alsa-devel@alsa-project.org Subject: Re: snd-aloop not working in linux-3.12.10
Dne 5.3.2015 v 17:42 Srinivasan S napsal(a):
Thanks for your replies,
I even tried in the below linux host machine first ie., ubuntu 12.04 prior trying in embedded board Linux srinivasan-Latitude-3440 3.13.0-43-generic #72~precise1-Ubuntu SMP Tue Dec 9 12:14:18 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
am getting the below
card 1, device 0 card 1, device 1
aplay -D hw:1,0,0 TangoForTajMusic11.wav
arecord -D hw:1,1,0 record .wav
Still this is not working in the linux host machine
Could you please help me out in resolving this issue in host machine
On my host, kernel 3.17.8-200.fc20.x86_64, loopback card is #3:
$ aplay -D plughw:3,0,0 /usr/share/sounds/alsa/Noise.wav Playing WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono $ arecord -D plughw:3,1,0 -f dat -c 1 a.wav Recording WAVE 'a.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
As you see, the "capture" program must set the same parameters as the sample provider.
This also works:
$ alsaloop -C hw:3,1 -P plughw:1 -t 50000
The "plughw:1" is the real sound hardware in this case (first device, second soundcard #1). The aplay command is same as in the first example with device "plughw:3,0,0". In this case, the alsaloop detects the PCM stream paramter changes automatically using the control API:
$ amixer -c 3 controls numid=2,iface=PCM,name='PCM Notify' numid=1,iface=PCM,name='PCM Rate Shift 100000' numid=3,iface=PCM,name='PCM Slave Active' numid=6,iface=PCM,name='PCM Slave Channels' numid=4,iface=PCM,name='PCM Slave Format' numid=5,iface=PCM,name='PCM Slave Rate' numid=8,iface=PCM,name='PCM Notify',subdevice=1 numid=7,iface=PCM,name='PCM Rate Shift 100000',subdevice=1 numid=9,iface=PCM,name='PCM Slave Active',subdevice=1
JaroslavThanks in advance
From: Jaroslav Kysela perex@perex.cz Sent: Thursday, March 5, 2015 7:43 PM To: Srinivasan S Cc: alsa-devel@alsa-project.org Subject: Re: snd-aloop not working in linux-3.12.10
Dne 5.3.2015 v 14:45 Srinivasan S napsal(a):
Dear Jaroslav
As this feature ie., snd-aloop designed by you, could you please redirect to the respective links where my queries can be posted & get the solutions for the problem
No idea. It looks like you are asking for a commercial support. It may be a cache coherency issue or something else. The embedded/ARM platforms might behave completely differently than x86 on which this code was developed and tested.
JaroslavAs we are trying to establish GSM two way calls via stereo codec
We are planning to use loopback module (ie.,snd-aloop and alsaloop in ti sdk 7) to connect the sink/source and source/sink GSM and Codec.
The below is the virtual devices created after configuring snd-aloop in the linux kernel 3.12.10
card 0, device 0 card 0, device 1
whatever am playing we are unable to record in the virtual device, but we are able to play & record with actual device
aplay -D hw:0,0,0 play.wav arecord -D hw:0,1,0 record.wav or alsaloop -C hw:0,1 -P hw:0,0 -t 50000 # second terminal, latency 50ms
As per the logs below, am using the above commands to perform loopback, could you please let me know why am unable to perform the loopback with the below commands or please let me know am I missing any configurations,
As this is feature is not working in ti sdk 7 (ie.,snd-aloop and alsaloop),
Kindly requesting to try in your am335x-evm where it has tlv codec & verify this feature ie., snd-aloop & let me know as early as possible
logs :
root@am335x-evm:/# ls /dev/snd/ by-path controlC1 pcmC0D0p pcmC0D1p pcmC1D0p controlC0 pcmC0D0c pcmC0D1c pcmC1D0c timer root@am335x-evm:/# cat /proc/asound/devices 0: [ 0] : control 16: [ 0- 0]: digital audio playback 17: [ 0- 1]: digital audio playback 24: [ 0- 0]: digital audio capture 25: [ 0- 1]: digital audio capture 32: [ 1] : control 33: : timer 48: [ 1- 0]: digital audio playback 56: [ 1- 0]: digital audio capture root@am335x-evm:/#
Loopback device
root@am335x-evm:/# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 0: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 1: UDA1345TS [TI UDA1345TS], device 0: UDA134x uda134x-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 root@am335x-evm:/# aplay -D hw:0,0,0 TangoForTajMusic11.wav Playing WAVE 'TangoForTajMusic11.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Actual device
root@am335x-evm:/# aplay -D hw:1,0,0 TangoForTajMusic11.wav Playing WAVE 'TangoForTajMusic11.wav' : Signed 16 bit Li[ 2219.654309] DAVINCIIIIIIIIII UDA134XXXXX SYSCLK=12288000 ttle Endian, Rate 48000 Hz, Stereo [ 2219.663776] DAVINCIIIIIIIIII UDA134XXXXX BCLK FREQQ=1536000 [ 2219.672880] DAVINCIIIIIIIIII UDA134XXXXX SYSCLK/BCLK_FREQ =8 [ 2219.678982] uda134x_hw_params CLOCKS uda134x_hw_params uda134x->sysclk: 12288000, params_rate(params):48000 [ 2219.689474] uda134x_hw_params FORMATS uda134x_hw_params dai_fmt: 16385, params_format:2 [ 2219.698095] uda134x_hw_params FORMATS uda134x_hw_params uda134x->sysclk / params_rate(params) 256 [ 2219.707644] UDA1345TSSSSSSSSSSSS SYSCLK / fs ratio is 256 [ 2219.713470] uda134x_hw_params dai_fmt: 16385, params_format:2 [ 2219.719639] UDA1345TSSSSSSSSSSSS FORMAT SND_SOC_DAIFMT_I2S [ 2219.725716] ENTERED davinci_config_channel_size davinci_config_channel_size: tx_rotate = 4 [ 2219.734620] ENTERED davinci_config_channel_size davinci_config_channel_size: MASK= 65535 [ 2219.748324] uda134x_unnnnnnnnmuteeeeeeeeee uda134x_mute mute: 0 [ 2219.756522] davinci_mcasp_starttttttttttttttttttttt SNDRV_PCM_STREAM_PLAYBACK
Kindly do the needful as early as possible Awaiting for your replies,
Many Thanks in advance,
-- Jaroslav Kysela perex@perex.cz Linux Kernel Sound Maintainer ALSA Project; Red Hat, Inc.
-- Jaroslav Kysela perex@perex.cz Linux Kernel Sound Maintainer ALSA Project; Red Hat, Inc.