At Sun, 25 Aug 2013 09:44:09 +0000 (UTC), Mikel García wrote:
Mark Brown <broonie <at> opensource.wolfsonmicro.com> writes:
On Sat, Feb 25, 2012 at 07:02:55PM +0100, Takashi Iwai wrote:
OK. BTW, what is the name of the codec chip? WM8800?
It'll be WM8850 or WM8860 - the two chips are indistinguishable from software. WM8800 is another variant but it is not generally available, though I appreciate it is what the ID register reads back.
On Sat, Feb 25, 2012 at 07:02:55PM +0100, Takashi Iwai wrote:
OK. BTW, what is the name of the codec chip? WM8800?
It'll be WM8850 or WM8860 - the two chips are indistinguishable from software. WM8800 is another variant but it is not generally available, though I appreciate it is what the ID register reads back.
Hello, a this moment with a 3.7.10 kernel and debian wheezy I only have control of the Master volume with the generic parser (wm8850). Only one output can be controlled. No inputs are detected. What do you mean with appropriate bios setup? Do you know if there is more compatibility in higher kernels?
You should use 3.9 or later kernels. There have been huge rewrites of the generic parser from that version.
Takashi