From: Marcus Cooper codekipper@gmail.com
The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its reset is controlled via a separate reset controller.
Signed-off-by: Marcus Cooper codekipper@gmail.com --- Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt index 13503aa..4fe80f7 100644 --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -9,6 +9,7 @@ Required properties:
- compatible : should be one of the following: - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC + - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
- reg : Offset and length of the register set for the device.
@@ -25,6 +26,8 @@ Required properties: "apb" clock for the spdif bus. "spdif" clock for spdif controller.
+ - reset : reset specifier for the ahb reset (A31 and newer only) + Example:
spdif: spdif@01c21000 {