From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
Now we can replace Codec to Component. Let's do it.
Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1
Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com --- sound/soc/codecs/wm8962.c | 397 +++++++++++++++++++++--------------------- sound/soc/codecs/wm8962.h | 2 +- sound/soc/samsung/tobermory.c | 6 +- 3 files changed, 202 insertions(+), 203 deletions(-)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index fd2731d..a11e9d6 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -55,7 +55,7 @@ struct wm8962_priv { struct wm8962_pdata pdata; struct regmap *regmap; - struct snd_soc_codec *codec; + struct snd_soc_component *component;
int sysclk; int sysclk_rate; @@ -1475,55 +1475,55 @@ static const DECLARE_TLV_DB_RANGE(classd_tlv, ); static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
-static int wm8962_dsp2_write_config(struct snd_soc_codec *codec) +static int wm8962_dsp2_write_config(struct snd_soc_component *component) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component);
return regcache_sync_region(wm8962->regmap, WM8962_HDBASS_AI_1, WM8962_MAX_REGISTER); }
-static int wm8962_dsp2_set_enable(struct snd_soc_codec *codec, u16 val) +static int wm8962_dsp2_set_enable(struct snd_soc_component *component, u16 val) { - u16 adcl = snd_soc_read(codec, WM8962_LEFT_ADC_VOLUME); - u16 adcr = snd_soc_read(codec, WM8962_RIGHT_ADC_VOLUME); - u16 dac = snd_soc_read(codec, WM8962_ADC_DAC_CONTROL_1); + u16 adcl = snd_soc_component_read32(component, WM8962_LEFT_ADC_VOLUME); + u16 adcr = snd_soc_component_read32(component, WM8962_RIGHT_ADC_VOLUME); + u16 dac = snd_soc_component_read32(component, WM8962_ADC_DAC_CONTROL_1);
/* Mute the ADCs and DACs */ - snd_soc_write(codec, WM8962_LEFT_ADC_VOLUME, 0); - snd_soc_write(codec, WM8962_RIGHT_ADC_VOLUME, WM8962_ADC_VU); - snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1, + snd_soc_component_write(component, WM8962_LEFT_ADC_VOLUME, 0); + snd_soc_component_write(component, WM8962_RIGHT_ADC_VOLUME, WM8962_ADC_VU); + snd_soc_component_update_bits(component, WM8962_ADC_DAC_CONTROL_1, WM8962_DAC_MUTE, WM8962_DAC_MUTE);
- snd_soc_write(codec, WM8962_SOUNDSTAGE_ENABLES_0, val); + snd_soc_component_write(component, WM8962_SOUNDSTAGE_ENABLES_0, val);
/* Restore the ADCs and DACs */ - snd_soc_write(codec, WM8962_LEFT_ADC_VOLUME, adcl); - snd_soc_write(codec, WM8962_RIGHT_ADC_VOLUME, adcr); - snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1, + snd_soc_component_write(component, WM8962_LEFT_ADC_VOLUME, adcl); + snd_soc_component_write(component, WM8962_RIGHT_ADC_VOLUME, adcr); + snd_soc_component_update_bits(component, WM8962_ADC_DAC_CONTROL_1, WM8962_DAC_MUTE, dac);
return 0; }
-static int wm8962_dsp2_start(struct snd_soc_codec *codec) +static int wm8962_dsp2_start(struct snd_soc_component *component) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component);
- wm8962_dsp2_write_config(codec); + wm8962_dsp2_write_config(component);
- snd_soc_write(codec, WM8962_DSP2_EXECCONTROL, WM8962_DSP2_RUNR); + snd_soc_component_write(component, WM8962_DSP2_EXECCONTROL, WM8962_DSP2_RUNR);
- wm8962_dsp2_set_enable(codec, wm8962->dsp2_ena); + wm8962_dsp2_set_enable(component, wm8962->dsp2_ena);
return 0; }
-static int wm8962_dsp2_stop(struct snd_soc_codec *codec) +static int wm8962_dsp2_stop(struct snd_soc_component *component) { - wm8962_dsp2_set_enable(codec, 0); + wm8962_dsp2_set_enable(component, 0);
- snd_soc_write(codec, WM8962_DSP2_EXECCONTROL, WM8962_DSP2_STOP); + snd_soc_component_write(component, WM8962_DSP2_EXECCONTROL, WM8962_DSP2_STOP);
return 0; } @@ -1550,8 +1550,8 @@ static int wm8962_dsp2_ena_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { int shift = kcontrol->private_value; - struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component);
ucontrol->value.integer.value[0] = !!(wm8962->dsp2_ena & 1 << shift);
@@ -1562,11 +1562,11 @@ static int wm8962_dsp2_ena_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { int shift = kcontrol->private_value; - struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component); int old = wm8962->dsp2_ena; int ret = 0; - int dsp2_running = snd_soc_read(codec, WM8962_DSP2_POWER_MANAGEMENT) & + int dsp2_running = snd_soc_component_read32(component, WM8962_DSP2_POWER_MANAGEMENT) & WM8962_DSP2_ENA;
mutex_lock(&wm8962->dsp2_ena_lock); @@ -1583,9 +1583,9 @@ static int wm8962_dsp2_ena_put(struct snd_kcontrol *kcontrol,
if (dsp2_running) { if (wm8962->dsp2_ena) - wm8962_dsp2_set_enable(codec, wm8962->dsp2_ena); + wm8962_dsp2_set_enable(component, wm8962->dsp2_ena); else - wm8962_dsp2_stop(codec); + wm8962_dsp2_stop(component); }
out: @@ -1600,7 +1600,7 @@ static int wm8962_dsp2_ena_put(struct snd_kcontrol *kcontrol, static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { - struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); int ret;
/* Apply the update (if any) */ @@ -1609,17 +1609,17 @@ static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol, return 0;
/* If the left PGA is enabled hit that VU bit... */ - ret = snd_soc_read(codec, WM8962_PWR_MGMT_2); + ret = snd_soc_component_read32(component, WM8962_PWR_MGMT_2); if (ret & WM8962_HPOUTL_PGA_ENA) { - snd_soc_write(codec, WM8962_HPOUTL_VOLUME, - snd_soc_read(codec, WM8962_HPOUTL_VOLUME)); + snd_soc_component_write(component, WM8962_HPOUTL_VOLUME, + snd_soc_component_read32(component, WM8962_HPOUTL_VOLUME)); return 1; }
/* ...otherwise the right. The VU is stereo. */ if (ret & WM8962_HPOUTR_PGA_ENA) - snd_soc_write(codec, WM8962_HPOUTR_VOLUME, - snd_soc_read(codec, WM8962_HPOUTR_VOLUME)); + snd_soc_component_write(component, WM8962_HPOUTR_VOLUME, + snd_soc_component_read32(component, WM8962_HPOUTR_VOLUME));
return 1; } @@ -1630,7 +1630,7 @@ static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol, static int wm8962_put_spk_sw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { - struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); int ret;
/* Apply the update (if any) */ @@ -1639,17 +1639,17 @@ static int wm8962_put_spk_sw(struct snd_kcontrol *kcontrol, return 0;
/* If the left PGA is enabled hit that VU bit... */ - ret = snd_soc_read(codec, WM8962_PWR_MGMT_2); + ret = snd_soc_component_read32(component, WM8962_PWR_MGMT_2); if (ret & WM8962_SPKOUTL_PGA_ENA) { - snd_soc_write(codec, WM8962_SPKOUTL_VOLUME, - snd_soc_read(codec, WM8962_SPKOUTL_VOLUME)); + snd_soc_component_write(component, WM8962_SPKOUTL_VOLUME, + snd_soc_component_read32(component, WM8962_SPKOUTL_VOLUME)); return 1; }
/* ...otherwise the right. The VU is stereo. */ if (ret & WM8962_SPKOUTR_PGA_ENA) - snd_soc_write(codec, WM8962_SPKOUTR_VOLUME, - snd_soc_read(codec, WM8962_SPKOUTR_VOLUME)); + snd_soc_component_write(component, WM8962_SPKOUTR_VOLUME, + snd_soc_component_read32(component, WM8962_SPKOUTR_VOLUME));
return 1; } @@ -1863,7 +1863,7 @@ static int cp_event(struct snd_soc_dapm_widget *w, static int hp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { - struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); int timeout; int reg; int expected = (WM8962_DCS_STARTUP_DONE_HP1L | @@ -1871,17 +1871,17 @@ static int hp_event(struct snd_soc_dapm_widget *w,
switch (event) { case SND_SOC_DAPM_POST_PMU: - snd_soc_update_bits(codec, WM8962_ANALOGUE_HP_0, + snd_soc_component_update_bits(component, WM8962_ANALOGUE_HP_0, WM8962_HP1L_ENA | WM8962_HP1R_ENA, WM8962_HP1L_ENA | WM8962_HP1R_ENA); udelay(20);
- snd_soc_update_bits(codec, WM8962_ANALOGUE_HP_0, + snd_soc_component_update_bits(component, WM8962_ANALOGUE_HP_0, WM8962_HP1L_ENA_DLY | WM8962_HP1R_ENA_DLY, WM8962_HP1L_ENA_DLY | WM8962_HP1R_ENA_DLY);
/* Start the DC servo */ - snd_soc_update_bits(codec, WM8962_DC_SERVO_1, + snd_soc_component_update_bits(component, WM8962_DC_SERVO_1, WM8962_HP1L_DCS_ENA | WM8962_HP1R_DCS_ENA | WM8962_HP1L_DCS_STARTUP | WM8962_HP1R_DCS_STARTUP, @@ -1893,30 +1893,30 @@ static int hp_event(struct snd_soc_dapm_widget *w, timeout = 0; do { msleep(1); - reg = snd_soc_read(codec, WM8962_DC_SERVO_6); + reg = snd_soc_component_read32(component, WM8962_DC_SERVO_6); if (reg < 0) { - dev_err(codec->dev, + dev_err(component->dev, "Failed to read DCS status: %d\n", reg); continue; } - dev_dbg(codec->dev, "DCS status: %x\n", reg); + dev_dbg(component->dev, "DCS status: %x\n", reg); } while (++timeout < 200 && (reg & expected) != expected);
if ((reg & expected) != expected) - dev_err(codec->dev, "DC servo timed out\n"); + dev_err(component->dev, "DC servo timed out\n"); else - dev_dbg(codec->dev, "DC servo complete after %dms\n", + dev_dbg(component->dev, "DC servo complete after %dms\n", timeout);
- snd_soc_update_bits(codec, WM8962_ANALOGUE_HP_0, + snd_soc_component_update_bits(component, WM8962_ANALOGUE_HP_0, WM8962_HP1L_ENA_OUTP | WM8962_HP1R_ENA_OUTP, WM8962_HP1L_ENA_OUTP | WM8962_HP1R_ENA_OUTP); udelay(20);
- snd_soc_update_bits(codec, WM8962_ANALOGUE_HP_0, + snd_soc_component_update_bits(component, WM8962_ANALOGUE_HP_0, WM8962_HP1L_RMV_SHORT | WM8962_HP1R_RMV_SHORT, WM8962_HP1L_RMV_SHORT | @@ -1924,19 +1924,19 @@ static int hp_event(struct snd_soc_dapm_widget *w, break;
case SND_SOC_DAPM_PRE_PMD: - snd_soc_update_bits(codec, WM8962_ANALOGUE_HP_0, + snd_soc_component_update_bits(component, WM8962_ANALOGUE_HP_0, WM8962_HP1L_RMV_SHORT | WM8962_HP1R_RMV_SHORT, 0);
udelay(20);
- snd_soc_update_bits(codec, WM8962_DC_SERVO_1, + snd_soc_component_update_bits(component, WM8962_DC_SERVO_1, WM8962_HP1L_DCS_ENA | WM8962_HP1R_DCS_ENA | WM8962_HP1L_DCS_STARTUP | WM8962_HP1R_DCS_STARTUP, 0);
- snd_soc_update_bits(codec, WM8962_ANALOGUE_HP_0, + snd_soc_component_update_bits(component, WM8962_ANALOGUE_HP_0, WM8962_HP1L_ENA | WM8962_HP1R_ENA | WM8962_HP1L_ENA_DLY | WM8962_HP1R_ENA_DLY | WM8962_HP1L_ENA_OUTP | @@ -1957,7 +1957,7 @@ static int hp_event(struct snd_soc_dapm_widget *w, static int out_pga_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { - struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); int reg;
switch (w->shift) { @@ -1980,7 +1980,7 @@ static int out_pga_event(struct snd_soc_dapm_widget *w,
switch (event) { case SND_SOC_DAPM_POST_PMU: - return snd_soc_write(codec, reg, snd_soc_read(codec, reg)); + return snd_soc_component_write(component, reg, snd_soc_component_read32(component, reg)); default: WARN(1, "Invalid event %d\n", event); return -EINVAL; @@ -1990,18 +1990,18 @@ static int out_pga_event(struct snd_soc_dapm_widget *w, static int dsp2_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { - struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component);
switch (event) { case SND_SOC_DAPM_POST_PMU: if (wm8962->dsp2_ena) - wm8962_dsp2_start(codec); + wm8962_dsp2_start(component); break;
case SND_SOC_DAPM_PRE_PMD: if (wm8962->dsp2_ena) - wm8962_dsp2_stop(codec); + wm8962_dsp2_stop(component); break;
default: @@ -2354,19 +2354,19 @@ static SOC_ENUM_SINGLE_DECL(hpoutl_enum, { "SPKOUTR", NULL, "SPKOUTR Output" }, };
-static int wm8962_add_widgets(struct snd_soc_codec *codec) +static int wm8962_add_widgets(struct snd_soc_component *component) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component); struct wm8962_pdata *pdata = &wm8962->pdata; - struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
- snd_soc_add_codec_controls(codec, wm8962_snd_controls, + snd_soc_add_component_controls(component, wm8962_snd_controls, ARRAY_SIZE(wm8962_snd_controls)); if (pdata->spk_mono) - snd_soc_add_codec_controls(codec, wm8962_spk_mono_controls, + snd_soc_add_component_controls(component, wm8962_spk_mono_controls, ARRAY_SIZE(wm8962_spk_mono_controls)); else - snd_soc_add_codec_controls(codec, wm8962_spk_stereo_controls, + snd_soc_add_component_controls(component, wm8962_spk_stereo_controls, ARRAY_SIZE(wm8962_spk_stereo_controls));
@@ -2403,21 +2403,21 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec) 64, 128, 192, 256, 384, 512, 768, 1024, 1408, 1536, 3072, 6144 };
-static void wm8962_configure_bclk(struct snd_soc_codec *codec) +static void wm8962_configure_bclk(struct snd_soc_component *component) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component); int dspclk, i; int clocking2 = 0; int clocking4 = 0; int aif2 = 0;
if (!wm8962->sysclk_rate) { - dev_dbg(codec->dev, "No SYSCLK configured\n"); + dev_dbg(component->dev, "No SYSCLK configured\n"); return; }
if (!wm8962->bclk || !wm8962->lrclk) { - dev_dbg(codec->dev, "No audio clocks configured\n"); + dev_dbg(component->dev, "No audio clocks configured\n"); return; }
@@ -2429,32 +2429,32 @@ static void wm8962_configure_bclk(struct snd_soc_codec *codec) }
if (i == ARRAY_SIZE(sysclk_rates)) { - dev_err(codec->dev, "Unsupported sysclk ratio %d\n", + dev_err(component->dev, "Unsupported sysclk ratio %d\n", wm8962->sysclk_rate / wm8962->lrclk); return; }
- dev_dbg(codec->dev, "Selected sysclk ratio %d\n", sysclk_rates[i]); + dev_dbg(component->dev, "Selected sysclk ratio %d\n", sysclk_rates[i]);
- snd_soc_update_bits(codec, WM8962_CLOCKING_4, + snd_soc_component_update_bits(component, WM8962_CLOCKING_4, WM8962_SYSCLK_RATE_MASK, clocking4);
/* DSPCLK_DIV can be only generated correctly after enabling SYSCLK. * So we here provisionally enable it and then disable it afterward * if current bias_level hasn't reached SND_SOC_BIAS_ON. */ - if (snd_soc_codec_get_bias_level(codec) != SND_SOC_BIAS_ON) - snd_soc_update_bits(codec, WM8962_CLOCKING2, + if (snd_soc_component_get_bias_level(component) != SND_SOC_BIAS_ON) + snd_soc_component_update_bits(component, WM8962_CLOCKING2, WM8962_SYSCLK_ENA_MASK, WM8962_SYSCLK_ENA);
- dspclk = snd_soc_read(codec, WM8962_CLOCKING1); + dspclk = snd_soc_component_read32(component, WM8962_CLOCKING1);
- if (snd_soc_codec_get_bias_level(codec) != SND_SOC_BIAS_ON) - snd_soc_update_bits(codec, WM8962_CLOCKING2, + if (snd_soc_component_get_bias_level(component) != SND_SOC_BIAS_ON) + snd_soc_component_update_bits(component, WM8962_CLOCKING2, WM8962_SYSCLK_ENA_MASK, 0);
if (dspclk < 0) { - dev_err(codec->dev, "Failed to read DSPCLK: %d\n", dspclk); + dev_err(component->dev, "Failed to read DSPCLK: %d\n", dspclk); return; }
@@ -2470,11 +2470,11 @@ static void wm8962_configure_bclk(struct snd_soc_codec *codec) dspclk = wm8962->sysclk_rate / 4; break; default: - dev_warn(codec->dev, "Unknown DSPCLK divisor read back\n"); + dev_warn(component->dev, "Unknown DSPCLK divisor read back\n"); dspclk = wm8962->sysclk_rate; }
- dev_dbg(codec->dev, "DSPCLK is %dHz, BCLK %d\n", dspclk, wm8962->bclk); + dev_dbg(component->dev, "DSPCLK is %dHz, BCLK %d\n", dspclk, wm8962->bclk);
/* We're expecting an exact match */ for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { @@ -2482,29 +2482,29 @@ static void wm8962_configure_bclk(struct snd_soc_codec *codec) continue;
if (dspclk / bclk_divs[i] == wm8962->bclk) { - dev_dbg(codec->dev, "Selected BCLK_DIV %d for %dHz\n", + dev_dbg(component->dev, "Selected BCLK_DIV %d for %dHz\n", bclk_divs[i], wm8962->bclk); clocking2 |= i; break; } } if (i == ARRAY_SIZE(bclk_divs)) { - dev_err(codec->dev, "Unsupported BCLK ratio %d\n", + dev_err(component->dev, "Unsupported BCLK ratio %d\n", dspclk / wm8962->bclk); return; }
aif2 |= wm8962->bclk / wm8962->lrclk; - dev_dbg(codec->dev, "Selected LRCLK divisor %d for %dHz\n", + dev_dbg(component->dev, "Selected LRCLK divisor %d for %dHz\n", wm8962->bclk / wm8962->lrclk, wm8962->lrclk);
- snd_soc_update_bits(codec, WM8962_CLOCKING2, + snd_soc_component_update_bits(component, WM8962_CLOCKING2, WM8962_BCLK_DIV_MASK, clocking2); - snd_soc_update_bits(codec, WM8962_AUDIO_INTERFACE_2, + snd_soc_component_update_bits(component, WM8962_AUDIO_INTERFACE_2, WM8962_AIF_RATE_MASK, aif2); }
-static int wm8962_set_bias_level(struct snd_soc_codec *codec, +static int wm8962_set_bias_level(struct snd_soc_component *component, enum snd_soc_bias_level level) { switch (level) { @@ -2513,18 +2513,18 @@ static int wm8962_set_bias_level(struct snd_soc_codec *codec,
case SND_SOC_BIAS_PREPARE: /* VMID 2*50k */ - snd_soc_update_bits(codec, WM8962_PWR_MGMT_1, + snd_soc_component_update_bits(component, WM8962_PWR_MGMT_1, WM8962_VMID_SEL_MASK, 0x80);
- wm8962_configure_bclk(codec); + wm8962_configure_bclk(component); break;
case SND_SOC_BIAS_STANDBY: /* VMID 2*250k */ - snd_soc_update_bits(codec, WM8962_PWR_MGMT_1, + snd_soc_component_update_bits(component, WM8962_PWR_MGMT_1, WM8962_VMID_SEL_MASK, 0x100);
- if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) + if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) msleep(100); break;
@@ -2556,8 +2556,8 @@ static int wm8962_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { - struct snd_soc_codec *codec = dai->codec; - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = dai->component; + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component); int i; int aif0 = 0; int adctl3 = 0; @@ -2575,7 +2575,7 @@ static int wm8962_hw_params(struct snd_pcm_substream *substream, } } if (i == ARRAY_SIZE(sr_vals)) { - dev_err(codec->dev, "Unsupported rate %dHz\n", wm8962->lrclk); + dev_err(component->dev, "Unsupported rate %dHz\n", wm8962->lrclk); return -EINVAL; }
@@ -2598,17 +2598,17 @@ static int wm8962_hw_params(struct snd_pcm_substream *substream, return -EINVAL; }
- snd_soc_update_bits(codec, WM8962_AUDIO_INTERFACE_0, + snd_soc_component_update_bits(component, WM8962_AUDIO_INTERFACE_0, WM8962_WL_MASK, aif0); - snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_3, + snd_soc_component_update_bits(component, WM8962_ADDITIONAL_CONTROL_3, WM8962_SAMPLE_RATE_INT_MODE | WM8962_SAMPLE_RATE_MASK, adctl3);
- dev_dbg(codec->dev, "hw_params set BCLK %dHz LRCLK %dHz\n", + dev_dbg(component->dev, "hw_params set BCLK %dHz LRCLK %dHz\n", wm8962->bclk, wm8962->lrclk);
- if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_ON) - wm8962_configure_bclk(codec); + if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_ON) + wm8962_configure_bclk(component);
return 0; } @@ -2616,8 +2616,8 @@ static int wm8962_hw_params(struct snd_pcm_substream *substream, static int wm8962_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, unsigned int freq, int dir) { - struct snd_soc_codec *codec = dai->codec; - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = dai->component; + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component); int src;
switch (clk_id) { @@ -2633,7 +2633,7 @@ static int wm8962_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, return -EINVAL; }
- snd_soc_update_bits(codec, WM8962_CLOCKING2, WM8962_SYSCLK_SRC_MASK, + snd_soc_component_update_bits(component, WM8962_CLOCKING2, WM8962_SYSCLK_SRC_MASK, src);
wm8962->sysclk_rate = freq; @@ -2643,7 +2643,7 @@ static int wm8962_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
static int wm8962_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) { - struct snd_soc_codec *codec = dai->codec; + struct snd_soc_component *component = dai->component; int aif0 = 0;
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { @@ -2699,7 +2699,7 @@ static int wm8962_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) return -EINVAL; }
- snd_soc_update_bits(codec, WM8962_AUDIO_INTERFACE_0, + snd_soc_component_update_bits(component, WM8962_AUDIO_INTERFACE_0, WM8962_FMT_MASK | WM8962_BCLK_INV | WM8962_MSTR | WM8962_LRCLK_INV, aif0);
@@ -2809,10 +2809,10 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, return 0; }
-static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source, +static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int source, unsigned int Fref, unsigned int Fout) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component); struct _fll_div fll_div; unsigned long timeout; int ret; @@ -2824,15 +2824,15 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source, return 0;
if (Fout == 0) { - dev_dbg(codec->dev, "FLL disabled\n"); + dev_dbg(component->dev, "FLL disabled\n");
wm8962->fll_fref = 0; wm8962->fll_fout = 0;
- snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1, + snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_1, WM8962_FLL_ENA, 0);
- pm_runtime_put(codec->dev); + pm_runtime_put(component->dev);
return 0; } @@ -2842,7 +2842,7 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source, return ret;
/* Parameters good, disable so we can reprogram */ - snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1, WM8962_FLL_ENA, 0); + snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_1, WM8962_FLL_ENA, 0);
switch (fll_id) { case WM8962_FLL_MCLK: @@ -2851,13 +2851,13 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source, fll1 |= (fll_id - 1) << WM8962_FLL_REFCLK_SRC_SHIFT; break; case WM8962_FLL_INT: - snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1, + snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_1, WM8962_FLL_OSC_ENA, WM8962_FLL_OSC_ENA); - snd_soc_update_bits(codec, WM8962_FLL_CONTROL_5, + snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_5, WM8962_FLL_FRC_NCO, WM8962_FLL_FRC_NCO); break; default: - dev_err(codec->dev, "Unknown FLL source %d\n", ret); + dev_err(component->dev, "Unknown FLL source %d\n", ret); return -EINVAL; }
@@ -2865,34 +2865,34 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source, fll1 |= WM8962_FLL_FRAC;
/* Stop the FLL while we reconfigure */ - snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1, WM8962_FLL_ENA, 0); + snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_1, WM8962_FLL_ENA, 0);
- snd_soc_update_bits(codec, WM8962_FLL_CONTROL_2, + snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_2, WM8962_FLL_OUTDIV_MASK | WM8962_FLL_REFCLK_DIV_MASK, (fll_div.fll_outdiv << WM8962_FLL_OUTDIV_SHIFT) | (fll_div.fll_refclk_div));
- snd_soc_update_bits(codec, WM8962_FLL_CONTROL_3, + snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_3, WM8962_FLL_FRATIO_MASK, fll_div.fll_fratio);
- snd_soc_write(codec, WM8962_FLL_CONTROL_6, fll_div.theta); - snd_soc_write(codec, WM8962_FLL_CONTROL_7, fll_div.lambda); - snd_soc_write(codec, WM8962_FLL_CONTROL_8, fll_div.n); + snd_soc_component_write(component, WM8962_FLL_CONTROL_6, fll_div.theta); + snd_soc_component_write(component, WM8962_FLL_CONTROL_7, fll_div.lambda); + snd_soc_component_write(component, WM8962_FLL_CONTROL_8, fll_div.n);
reinit_completion(&wm8962->fll_lock);
- ret = pm_runtime_get_sync(codec->dev); + ret = pm_runtime_get_sync(component->dev); if (ret < 0) { - dev_err(codec->dev, "Failed to resume device: %d\n", ret); + dev_err(component->dev, "Failed to resume device: %d\n", ret); return ret; }
- snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1, + snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_1, WM8962_FLL_FRAC | WM8962_FLL_REFCLK_SRC_MASK | WM8962_FLL_ENA, fll1 | WM8962_FLL_ENA);
- dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout); + dev_dbg(component->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout);
/* This should be a massive overestimate but go even * higher if we'll error out @@ -2906,10 +2906,10 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source, timeout);
if (timeout == 0 && wm8962->irq) { - dev_err(codec->dev, "FLL lock timed out"); - snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1, + dev_err(component->dev, "FLL lock timed out"); + snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_1, WM8962_FLL_ENA, 0); - pm_runtime_put(codec->dev); + pm_runtime_put(component->dev); return -ETIMEDOUT; }
@@ -2922,7 +2922,7 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
static int wm8962_mute(struct snd_soc_dai *dai, int mute) { - struct snd_soc_codec *codec = dai->codec; + struct snd_soc_component *component = dai->component; int val, ret;
if (mute) @@ -2934,12 +2934,12 @@ static int wm8962_mute(struct snd_soc_dai *dai, int mute) * The DAC mute bit is mirrored in two registers, update both to keep * the register cache consistent. */ - ret = snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_1, + ret = snd_soc_component_update_bits(component, WM8962_CLASS_D_CONTROL_1, WM8962_DAC_MUTE_ALT, val); if (ret < 0) return ret;
- return snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1, + return snd_soc_component_update_bits(component, WM8962_ADC_DAC_CONTROL_1, WM8962_DAC_MUTE, val); }
@@ -2981,12 +2981,12 @@ static void wm8962_mic_work(struct work_struct *work) struct wm8962_priv *wm8962 = container_of(work, struct wm8962_priv, mic_work.work); - struct snd_soc_codec *codec = wm8962->codec; + struct snd_soc_component *component = wm8962->component; int status = 0; int irq_pol = 0; int reg;
- reg = snd_soc_read(codec, WM8962_ADDITIONAL_CONTROL_4); + reg = snd_soc_component_read32(component, WM8962_ADDITIONAL_CONTROL_4);
if (reg & WM8962_MICDET_STS) { status |= SND_JACK_MICROPHONE; @@ -3001,7 +3001,7 @@ static void wm8962_mic_work(struct work_struct *work) snd_soc_jack_report(wm8962->jack, status, SND_JACK_MICROPHONE | SND_JACK_BTN_0);
- snd_soc_update_bits(codec, WM8962_MICINT_SOURCE_POL, + snd_soc_component_update_bits(component, WM8962_MICINT_SOURCE_POL, WM8962_MICSCD_IRQ_POL | WM8962_MICD_IRQ_POL, irq_pol); } @@ -3099,7 +3099,7 @@ static irqreturn_t wm8962_irq(int irq, void *data) /** * wm8962_mic_detect - Enable microphone detection via the WM8962 IRQ * - * @codec: WM8962 codec + * @component: WM8962 component * @jack: jack to report detection events on * * Enable microphone detection via IRQ on the WM8962. If GPIOs are @@ -3109,10 +3109,10 @@ static irqreturn_t wm8962_irq(int irq, void *data) * * If no jack is supplied detection will be disabled. */ -int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack) +int wm8962_mic_detect(struct snd_soc_component *component, struct snd_soc_jack *jack) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); - struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); int irq_mask, enable;
wm8962->jack = jack; @@ -3124,9 +3124,9 @@ int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack) enable = 0; }
- snd_soc_update_bits(codec, WM8962_INTERRUPT_STATUS_2_MASK, + snd_soc_component_update_bits(component, WM8962_INTERRUPT_STATUS_2_MASK, WM8962_MICD_EINT | WM8962_MICSCD_EINT, irq_mask); - snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4, + snd_soc_component_update_bits(component, WM8962_ADDITIONAL_CONTROL_4, WM8962_MICDET_ENA, enable);
/* Send an initial empty report */ @@ -3157,8 +3157,8 @@ static void wm8962_beep_work(struct work_struct *work) { struct wm8962_priv *wm8962 = container_of(work, struct wm8962_priv, beep_work); - struct snd_soc_codec *codec = wm8962->codec; - struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec); + struct snd_soc_component *component = wm8962->component; + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); int i; int reg = 0; int best = 0; @@ -3170,18 +3170,18 @@ static void wm8962_beep_work(struct work_struct *work) best = i; }
- dev_dbg(codec->dev, "Set beep rate %dHz for requested %dHz\n", + dev_dbg(component->dev, "Set beep rate %dHz for requested %dHz\n", beep_rates[best], wm8962->beep_rate);
reg = WM8962_BEEP_ENA | (best << WM8962_BEEP_RATE_SHIFT);
snd_soc_dapm_enable_pin(dapm, "Beep"); } else { - dev_dbg(codec->dev, "Disabling beep\n"); + dev_dbg(component->dev, "Disabling beep\n"); snd_soc_dapm_disable_pin(dapm, "Beep"); }
- snd_soc_update_bits(codec, WM8962_BEEP_GENERATOR_1, + snd_soc_component_update_bits(component, WM8962_BEEP_GENERATOR_1, WM8962_BEEP_ENA | WM8962_BEEP_RATE_MASK, reg);
snd_soc_dapm_sync(dapm); @@ -3193,10 +3193,10 @@ static void wm8962_beep_work(struct work_struct *work) static int wm8962_beep_event(struct input_dev *dev, unsigned int type, unsigned int code, int hz) { - struct snd_soc_codec *codec = input_get_drvdata(dev); - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = input_get_drvdata(dev); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component);
- dev_dbg(codec->dev, "Beep event %x %x\n", code, hz); + dev_dbg(component->dev, "Beep event %x %x\n", code, hz);
switch (code) { case SND_BELL: @@ -3233,14 +3233,14 @@ static ssize_t wm8962_beep_set(struct device *dev,
static DEVICE_ATTR(beep, 0200, NULL, wm8962_beep_set);
-static void wm8962_init_beep(struct snd_soc_codec *codec) +static void wm8962_init_beep(struct snd_soc_component *component) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component); int ret;
- wm8962->beep = devm_input_allocate_device(codec->dev); + wm8962->beep = devm_input_allocate_device(component->dev); if (!wm8962->beep) { - dev_err(codec->dev, "Failed to allocate beep device\n"); + dev_err(component->dev, "Failed to allocate beep device\n"); return; }
@@ -3248,37 +3248,37 @@ static void wm8962_init_beep(struct snd_soc_codec *codec) wm8962->beep_rate = 0;
wm8962->beep->name = "WM8962 Beep Generator"; - wm8962->beep->phys = dev_name(codec->dev); + wm8962->beep->phys = dev_name(component->dev); wm8962->beep->id.bustype = BUS_I2C;
wm8962->beep->evbit[0] = BIT_MASK(EV_SND); wm8962->beep->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE); wm8962->beep->event = wm8962_beep_event; - wm8962->beep->dev.parent = codec->dev; - input_set_drvdata(wm8962->beep, codec); + wm8962->beep->dev.parent = component->dev; + input_set_drvdata(wm8962->beep, component);
ret = input_register_device(wm8962->beep); if (ret != 0) { wm8962->beep = NULL; - dev_err(codec->dev, "Failed to register beep device\n"); + dev_err(component->dev, "Failed to register beep device\n"); }
- ret = device_create_file(codec->dev, &dev_attr_beep); + ret = device_create_file(component->dev, &dev_attr_beep); if (ret != 0) { - dev_err(codec->dev, "Failed to create keyclick file: %d\n", + dev_err(component->dev, "Failed to create keyclick file: %d\n", ret); } }
-static void wm8962_free_beep(struct snd_soc_codec *codec) +static void wm8962_free_beep(struct snd_soc_component *component) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component);
- device_remove_file(codec->dev, &dev_attr_beep); + device_remove_file(component->dev, &dev_attr_beep); cancel_work_sync(&wm8962->beep_work); wm8962->beep = NULL;
- snd_soc_update_bits(codec, WM8962_BEEP_GENERATOR_1, WM8962_BEEP_ENA,0); + snd_soc_component_update_bits(component, WM8962_BEEP_GENERATOR_1, WM8962_BEEP_ENA,0); }
static void wm8962_set_gpio_mode(struct wm8962_priv *wm8962, int gpio) @@ -3333,9 +3333,9 @@ static int wm8962_gpio_request(struct gpio_chip *chip, unsigned offset) static void wm8962_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { struct wm8962_priv *wm8962 = gpiochip_get_data(chip); - struct snd_soc_codec *codec = wm8962->codec; + struct snd_soc_component *component = wm8962->component;
- snd_soc_update_bits(codec, WM8962_GPIO_BASE + offset, + snd_soc_component_update_bits(component, WM8962_GPIO_BASE + offset, WM8962_GP2_LVL, !!value << WM8962_GP2_LVL_SHIFT); }
@@ -3343,13 +3343,13 @@ static int wm8962_gpio_direction_out(struct gpio_chip *chip, unsigned offset, int value) { struct wm8962_priv *wm8962 = gpiochip_get_data(chip); - struct snd_soc_codec *codec = wm8962->codec; + struct snd_soc_component *component = wm8962->component; int ret, val;
/* Force function 1 (logic output) */ val = (1 << WM8962_GP2_FN_SHIFT) | (value << WM8962_GP2_LVL_SHIFT);
- ret = snd_soc_update_bits(codec, WM8962_GPIO_BASE + offset, + ret = snd_soc_component_update_bits(component, WM8962_GPIO_BASE + offset, WM8962_GP2_FN_MASK | WM8962_GP2_LVL, val); if (ret < 0) return ret; @@ -3366,15 +3366,15 @@ static int wm8962_gpio_direction_out(struct gpio_chip *chip, .can_sleep = 1, };
-static void wm8962_init_gpio(struct snd_soc_codec *codec) +static void wm8962_init_gpio(struct snd_soc_component *component) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component); struct wm8962_pdata *pdata = &wm8962->pdata; int ret;
wm8962->gpio_chip = wm8962_template_chip; wm8962->gpio_chip.ngpio = WM8962_MAX_GPIO; - wm8962->gpio_chip.parent = codec->dev; + wm8962->gpio_chip.parent = component->dev;
if (pdata->gpio_base) wm8962->gpio_chip.base = pdata->gpio_base; @@ -3383,34 +3383,34 @@ static void wm8962_init_gpio(struct snd_soc_codec *codec)
ret = gpiochip_add_data(&wm8962->gpio_chip, wm8962); if (ret != 0) - dev_err(codec->dev, "Failed to add GPIOs: %d\n", ret); + dev_err(component->dev, "Failed to add GPIOs: %d\n", ret); }
-static void wm8962_free_gpio(struct snd_soc_codec *codec) +static void wm8962_free_gpio(struct snd_soc_component *component) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component);
gpiochip_remove(&wm8962->gpio_chip); } #else -static void wm8962_init_gpio(struct snd_soc_codec *codec) +static void wm8962_init_gpio(struct snd_soc_component *component) { }
-static void wm8962_free_gpio(struct snd_soc_codec *codec) +static void wm8962_free_gpio(struct snd_soc_component *component) { } #endif
-static int wm8962_probe(struct snd_soc_codec *codec) +static int wm8962_probe(struct snd_soc_component *component) { - struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); int ret; - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component); int i; bool dmicclk, dmicdat;
- wm8962->codec = codec; + wm8962->component = component;
wm8962->disable_nb[0].notifier_call = wm8962_regulator_event_0; wm8962->disable_nb[1].notifier_call = wm8962_regulator_event_1; @@ -3426,19 +3426,19 @@ static int wm8962_probe(struct snd_soc_codec *codec) ret = regulator_register_notifier(wm8962->supplies[i].consumer, &wm8962->disable_nb[i]); if (ret != 0) { - dev_err(codec->dev, + dev_err(component->dev, "Failed to register regulator notifier: %d\n", ret); } }
- wm8962_add_widgets(codec); + wm8962_add_widgets(component);
/* Save boards having to disable DMIC when not in use */ dmicclk = false; dmicdat = false; for (i = 0; i < WM8962_MAX_GPIO; i++) { - switch (snd_soc_read(codec, WM8962_GPIO_BASE + i) + switch (snd_soc_component_read32(component, WM8962_GPIO_BASE + i) & WM8962_GP2_FN_MASK) { case WM8962_GPIO_FN_DMICCLK: dmicclk = true; @@ -3451,40 +3451,40 @@ static int wm8962_probe(struct snd_soc_codec *codec) } } if (!dmicclk || !dmicdat) { - dev_dbg(codec->dev, "DMIC not in use, disabling\n"); + dev_dbg(component->dev, "DMIC not in use, disabling\n"); snd_soc_dapm_nc_pin(dapm, "DMICDAT"); } if (dmicclk != dmicdat) - dev_warn(codec->dev, "DMIC GPIOs partially configured\n"); + dev_warn(component->dev, "DMIC GPIOs partially configured\n");
- wm8962_init_beep(codec); - wm8962_init_gpio(codec); + wm8962_init_beep(component); + wm8962_init_gpio(component);
return 0; }
-static int wm8962_remove(struct snd_soc_codec *codec) +static void wm8962_remove(struct snd_soc_component *component) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component); int i;
cancel_delayed_work_sync(&wm8962->mic_work);
- wm8962_free_gpio(codec); - wm8962_free_beep(codec); + wm8962_free_gpio(component); + wm8962_free_beep(component); for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++) regulator_unregister_notifier(wm8962->supplies[i].consumer, &wm8962->disable_nb[i]); - - return 0; }
-static const struct snd_soc_codec_driver soc_codec_dev_wm8962 = { - .probe = wm8962_probe, - .remove = wm8962_remove, - .set_bias_level = wm8962_set_bias_level, - .set_pll = wm8962_set_fll, - .idle_bias_off = true, +static const struct snd_soc_component_driver soc_component_dev_wm8962 = { + .probe = wm8962_probe, + .remove = wm8962_remove, + .set_bias_level = wm8962_set_bias_level, + .set_pll = wm8962_set_fll, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, };
/* Improve power consumption for IN4 DC measurement mode */ @@ -3751,8 +3751,8 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, pm_runtime_enable(&i2c->dev); pm_request_idle(&i2c->dev);
- ret = snd_soc_register_codec(&i2c->dev, - &soc_codec_dev_wm8962, &wm8962_dai, 1); + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_wm8962, &wm8962_dai, 1); if (ret < 0) goto err_pm_runtime;
@@ -3773,7 +3773,6 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
static int wm8962_i2c_remove(struct i2c_client *client) { - snd_soc_unregister_codec(&client->dev); pm_runtime_disable(&client->dev); return 0; } diff --git a/sound/soc/codecs/wm8962.h b/sound/soc/codecs/wm8962.h index e63a318..a4a42d2 100644 --- a/sound/soc/codecs/wm8962.h +++ b/sound/soc/codecs/wm8962.h @@ -3779,6 +3779,6 @@ #define WM8962_VSS_ENA_SHIFT 0 /* VSS_ENA */ #define WM8962_VSS_ENA_WIDTH 1 /* VSS_ENA */
-int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack); +int wm8962_mic_detect(struct snd_soc_component *component, struct snd_soc_jack *jack);
#endif diff --git a/sound/soc/samsung/tobermory.c b/sound/soc/samsung/tobermory.c index 3310eda..998727c 100644 --- a/sound/soc/samsung/tobermory.c +++ b/sound/soc/samsung/tobermory.c @@ -179,12 +179,12 @@ static int tobermory_hw_params(struct snd_pcm_substream *substream, static int tobermory_late_probe(struct snd_soc_card *card) { struct snd_soc_pcm_runtime *rtd; - struct snd_soc_codec *codec; + struct snd_soc_component *component; struct snd_soc_dai *codec_dai; int ret;
rtd = snd_soc_get_pcm_runtime(card, card->dai_link[0].name); - codec = rtd->codec; + component = rtd->codec_dai->component; codec_dai = rtd->codec_dai;
ret = snd_soc_dai_set_sysclk(codec_dai, WM8962_SYSCLK_MCLK, @@ -199,7 +199,7 @@ static int tobermory_late_probe(struct snd_soc_card *card) if (ret) return ret;
- wm8962_mic_detect(codec, &tobermory_headset); + wm8962_mic_detect(component, &tobermory_headset);
return 0; }