The problem, at this point, is that the mixer isn't even showing all the channels for the second codec. Secondly, I can only see one codec at a time, and I need to use both for my setup. The mentioned pastebin is the SVG output of codecgraph on the second codec on this system.
On Thu, Dec 11, 2008 at 5:55 PM, stan ghjeold_i_mwee@cox.net wrote:
Alex Austin wrote:
HelloI have an MSI Media Live DIVA motherboard. It has an AMD SB600 HD Audio controller, and two CODECs on the HDA bus.
First is an ALC888 Second is an Intersil DAE-3.
Two alsa-info outputs in different circumstances http://www.alsa-project.org/db/?f=20c86e755fdbbdbc8761c8c2f4de76bce2ea0c11 http://www.alsa-project.org/db/?f=15c5e5eab0104622a84b2dd0df03f26c17c7242d
Output of codecgraph with "modprobe hda-intel probe_mask=2" http://pastebin.com/f54b6a9b8
What's the next step to get this supported?
In both alsa-info.sh outputs, you have outputs turned on, but they are at zero volume. Have you tried running alsamixer to turn up volumes? If you are running pulseaudio you might have to use pulse to turn up volumes, I don't use it so I can't help with that.
Alsa starts with volumes at zero by default.
The other thing is you are using an older version of everything. I think the latest is at 1.0.18, and there are links on the page as http://www.alsa-project.org to get a tar ball of the very latest version available. There are no guarantees, but it might help as changes go in every day.