As part of updating the core to directly tell drivers if they are clock provider or consumer update this CPU side driver to use the new direct callback.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- sound/soc/ux500/ux500_msp_dai.c | 38 ++++++++++++++++----------------- 1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/sound/soc/ux500/ux500_msp_dai.c b/sound/soc/ux500/ux500_msp_dai.c index 21052378a32eb..cd6c4bdf5041d 100644 --- a/sound/soc/ux500/ux500_msp_dai.c +++ b/sound/soc/ux500/ux500_msp_dai.c @@ -191,8 +191,8 @@ static int setup_clocking(struct snd_soc_dai *dai, return -EINVAL; }
- switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { - case SND_SOC_DAIFMT_CBM_CFM: + switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) { + case SND_SOC_DAIFMT_BC_FC: dev_dbg(dai->dev, "%s: Codec is master.\n", __func__);
msp_config->iodelay = 0x20; @@ -204,7 +204,7 @@ static int setup_clocking(struct snd_soc_dai *dai,
break;
- case SND_SOC_DAIFMT_CBS_CFS: + case SND_SOC_DAIFMT_BP_FP: dev_dbg(dai->dev, "%s: Codec is slave.\n", __func__);
msp_config->tx_clk_sel = TX_CLK_SEL_SRG; @@ -328,15 +328,15 @@ static int setup_msp_config(struct snd_pcm_substream *substream, dev_dbg(dai->dev, "%s: rate: %u, channels: %d.\n", __func__, runtime->rate, runtime->channels); switch (fmt & - (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK)) { + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_BP_FP: dev_dbg(dai->dev, "%s: SND_SOC_DAIFMT_I2S.\n", __func__);
msp_config->default_protdesc = 1; msp_config->protocol = MSP_I2S_PROTOCOL; break;
- case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_BC_FC: dev_dbg(dai->dev, "%s: SND_SOC_DAIFMT_I2S.\n", __func__);
msp_config->data_size = MSP_DATA_BITS_16; @@ -348,10 +348,10 @@ static int setup_msp_config(struct snd_pcm_substream *substream,
break;
- case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBS_CFS: - case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_BP_FP: + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_BC_FC: + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_BP_FP: + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_BC_FC: dev_dbg(dai->dev, "%s: PCM format.\n", __func__);
msp_config->data_size = MSP_DATA_BITS_16; @@ -477,7 +477,7 @@ static int ux500_msp_dai_prepare(struct snd_pcm_substream *substream, }
/* Set OPP-level */ - if ((drvdata->fmt & SND_SOC_DAIFMT_MASTER_MASK) && + if ((drvdata->fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) && (drvdata->msp->f_bitclk > 19200000)) { /* If the bit-clock is higher than 19.2MHz, Vape should be * run in 100% OPP. Only when bit-clock is used (MSP master) @@ -544,13 +544,13 @@ static int ux500_msp_dai_set_dai_fmt(struct snd_soc_dai *dai, dev_dbg(dai->dev, "%s: MSP %d: Enter.\n", __func__, dai->id);
switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK | - SND_SOC_DAIFMT_MASTER_MASK)) { - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBS_CFS: - case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM: - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK)) { + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_BP_FP: + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_BC_FC: + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_BP_FP: + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_BC_FC: + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_BP_FP: + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_BC_FC: break;
default: @@ -707,7 +707,7 @@ static int ux500_msp_dai_probe(struct snd_soc_dai *dai) static const struct snd_soc_dai_ops ux500_msp_dai_ops[] = { { .set_sysclk = ux500_msp_dai_set_dai_sysclk, - .set_fmt = ux500_msp_dai_set_dai_fmt, + .set_fmt_new = ux500_msp_dai_set_dai_fmt, .set_tdm_slot = ux500_msp_dai_set_tdm_slot, .startup = ux500_msp_dai_startup, .shutdown = ux500_msp_dai_shutdown,