From: Dmitry Torokhov dmitry.torokhov@gmail.com
Switch the driver from legacy gpio API that is deprecated to the newer gpiod API that respects line polarities described in ACPI/DT.
Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Reviewed-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Tested-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org [krzysztof: rebased on recent dev_err_probe() changes] Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
---
Cc: Patrick Lai quic_plai@quicinc.com --- sound/soc/codecs/wcd938x.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c index 11b264a63b04..33fd8fdde9fd 100644 --- a/sound/soc/codecs/wcd938x.c +++ b/sound/soc/codecs/wcd938x.c @@ -6,12 +6,14 @@ #include <linux/platform_device.h> #include <linux/device.h> #include <linux/delay.h> +#include <linux/err.h> #include <linux/gpio/consumer.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/kernel.h> #include <linux/pm_runtime.h> #include <linux/component.h> #include <sound/tlv.h> -#include <linux/of_gpio.h> #include <linux/of.h> #include <sound/jack.h> #include <sound/pcm.h> @@ -194,7 +196,7 @@ struct wcd938x_priv { int flyback_cur_det_disable; int ear_rx_path; int variant; - int reset_gpio; + struct gpio_desc *reset_gpio; struct gpio_desc *us_euro_gpio; u32 micb1_mv; u32 micb2_mv; @@ -4234,16 +4236,16 @@ static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device struct wcd_mbhc_config *cfg = &wcd938x->mbhc_cfg; int ret;
- wcd938x->reset_gpio = of_get_named_gpio(dev->of_node, "reset-gpios", 0); - if (wcd938x->reset_gpio < 0) - return dev_err_probe(dev, wcd938x->reset_gpio, - "Failed to get reset gpio\n"); + wcd938x->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS); + ret = PTR_ERR_OR_ZERO(wcd938x->reset_gpio); + if (ret) + return dev_err_probe(dev, ret, "Failed to get reset gpio\n");
wcd938x->us_euro_gpio = devm_gpiod_get_optional(dev, "us-euro", GPIOD_OUT_LOW); - if (IS_ERR(wcd938x->us_euro_gpio)) - return dev_err_probe(dev, PTR_ERR(wcd938x->us_euro_gpio), - "us-euro swap Control GPIO not found\n"); + ret = PTR_ERR_OR_ZERO(wcd938x->us_euro_gpio); + if (ret) + return dev_err_probe(dev, ret, "us-euro swap Control GPIO not found\n");
cfg->swap_gnd_mic = wcd938x_swap_gnd_mic;
@@ -4278,11 +4280,11 @@ static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
static int wcd938x_reset(struct wcd938x_priv *wcd938x) { - gpio_direction_output(wcd938x->reset_gpio, 0); - /* 20us sleep required after pulling the reset gpio to LOW */ + gpiod_set_value_cansleep(wcd938x->reset_gpio, 1); + /* 20us sleep required after asserting the reset gpio */ usleep_range(20, 30); - gpio_set_value(wcd938x->reset_gpio, 1); - /* 20us sleep required after pulling the reset gpio to HIGH */ + gpiod_set_value_cansleep(wcd938x->reset_gpio, 0); + /* 20us sleep required after releasing the reset gpio */ usleep_range(20, 30);
return 0;