Hi,
On Sat, Jul 04, 2020 at 01:38:47PM +0200, Clément Péron wrote:
From: Jernej Skrabec jernej.skrabec@siol.net
H6 I2S is very similar to that in H3, except it supports up to 16 channels.
Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net Signed-off-by: Marcus Cooper codekipper@gmail.com Signed-off-by: Clément Péron peron.clem@gmail.com
sound/soc/sunxi/sun4i-i2s.c | 227 ++++++++++++++++++++++++++++++++++++ 1 file changed, 227 insertions(+)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c index d0a8d5810c0a..9690389cb68e 100644 --- a/sound/soc/sunxi/sun4i-i2s.c +++ b/sound/soc/sunxi/sun4i-i2s.c @@ -124,6 +124,21 @@ #define SUN8I_I2S_RX_CHAN_SEL_REG 0x54 #define SUN8I_I2S_RX_CHAN_MAP_REG 0x58
+/* Defines required for sun50i-h6 support */ +#define SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET_MASK GENMASK(21, 20) +#define SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET(offset) ((offset) << 20) +#define SUN50I_H6_I2S_TX_CHAN_SEL_MASK GENMASK(19, 16) +#define SUN50I_H6_I2S_TX_CHAN_SEL(chan) ((chan - 1) << 16) +#define SUN50I_H6_I2S_TX_CHAN_EN_MASK GENMASK(15, 0) +#define SUN50I_H6_I2S_TX_CHAN_EN(num_chan) (((1 << num_chan) - 1))
+#define SUN50I_H6_I2S_TX_CHAN_MAP0_REG 0x44 +#define SUN50I_H6_I2S_TX_CHAN_MAP1_REG 0x48
+#define SUN50I_H6_I2S_RX_CHAN_SEL_REG 0x64 +#define SUN50I_H6_I2S_RX_CHAN_MAP0_REG 0x68 +#define SUN50I_H6_I2S_RX_CHAN_MAP1_REG 0x6C
struct sun4i_i2s;
/** @@ -466,6 +481,65 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s, return 0; }
+static int sun50i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
const struct snd_pcm_hw_params *params)
We should have sun50i_h6 as prefix. The A64 is also part of the sun50i family and supported through the sun8i callbacks, so it's pretty confusing if you don't have the soc name in there.
Maxime