Signed-off-by: Eric Miao eric.miao@marvell.com --- drivers/input/touchscreen/Kconfig | 17 -- drivers/input/touchscreen/Makefile | 1 - drivers/input/touchscreen/corgi_ts.c | 385 ---------------------------------- 3 files changed, 0 insertions(+), 403 deletions(-) delete mode 100644 drivers/input/touchscreen/corgi_ts.c
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index bb6486a..b513845 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -41,23 +41,6 @@ config TOUCHSCREEN_BITSY To compile this driver as a module, choose M here: the module will be called h3600_ts_input.
-config TOUCHSCREEN_CORGI - tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)" - depends on PXA_SHARPSL - select CORGI_SSP_DEPRECATED - default y - help - Say Y here to enable the driver for the touchscreen on the - Sharp SL-C7xx and SL-Cxx00 series of PDAs. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called corgi_ts. - - NOTE: this driver is deprecated, try enable SPI and generic - ADS7846-based touchscreen driver. - config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index d3375af..f7e6d2d 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -9,7 +9,6 @@ wm97xx-ts-y := wm97xx-core.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o -obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c deleted file mode 100644 index 94a1919..0000000 --- a/drivers/input/touchscreen/corgi_ts.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * Touchscreen driver for Sharp SL-C7xx and SL-Cxx00 models - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - - -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/irq.h> - -#include <mach/sharpsl.h> -#include <mach/hardware.h> -#include <mach/pxa2xx-gpio.h> - - -#define PWR_MODE_ACTIVE 0 -#define PWR_MODE_SUSPEND 1 - -#define X_AXIS_MAX 3830 -#define X_AXIS_MIN 150 -#define Y_AXIS_MAX 3830 -#define Y_AXIS_MIN 190 -#define PRESSURE_MIN 0 -#define PRESSURE_MAX 15000 - -struct ts_event { - short pressure; - short x; - short y; -}; - -struct corgi_ts { - struct input_dev *input; - struct timer_list timer; - struct ts_event tc; - int pendown; - int power_mode; - int irq_gpio; - struct corgits_machinfo *machinfo; -}; - -#ifdef CONFIG_PXA25x -#define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C0, 0" : "=r"(a)) -#define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C0, 0" : "=r"(x)) -#define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C0, 0" : : "r"(x)) -#endif -#ifdef CONFIG_PXA27x -#define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C1, 0" : "=r"(a)) -#define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C1, 0" : "=r"(x)) -#define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C1, 0" : : "r"(x)) -#endif - -/* ADS7846 Touch Screen Controller bit definitions */ -#define ADSCTRL_PD0 (1u << 0) /* PD0 */ -#define ADSCTRL_PD1 (1u << 1) /* PD1 */ -#define ADSCTRL_DFR (1u << 2) /* SER/DFR */ -#define ADSCTRL_MOD (1u << 3) /* Mode */ -#define ADSCTRL_ADR_SH 4 /* Address setting */ -#define ADSCTRL_STS (1u << 7) /* Start Bit */ - -/* External Functions */ -extern unsigned int get_clk_frequency_khz(int info); - -static unsigned long calc_waittime(struct corgi_ts *corgi_ts) -{ - unsigned long hsync_invperiod = corgi_ts->machinfo->get_hsync_invperiod(); - - if (hsync_invperiod) - return get_clk_frequency_khz(0)*1000/hsync_invperiod; - else - return 0; -} - -static int sync_receive_data_send_cmd(struct corgi_ts *corgi_ts, int doRecive, int doSend, - unsigned int address, unsigned long wait_time) -{ - unsigned long timer1 = 0, timer2, pmnc = 0; - int pos = 0; - - if (wait_time && doSend) { - PMNC_GET(pmnc); - if (!(pmnc & 0x01)) - PMNC_SET(0x01); - - /* polling HSync */ - corgi_ts->machinfo->wait_hsync(); - /* get CCNT */ - CCNT(timer1); - } - - if (doRecive) - pos = corgi_ssp_ads7846_get(); - - if (doSend) { - int cmd = ADSCTRL_PD0 | ADSCTRL_PD1 | (address << ADSCTRL_ADR_SH) | ADSCTRL_STS; - /* dummy command */ - corgi_ssp_ads7846_put(cmd); - corgi_ssp_ads7846_get(); - - if (wait_time) { - /* Wait after HSync */ - CCNT(timer2); - if (timer2-timer1 > wait_time) { - /* too slow - timeout, try again */ - corgi_ts->machinfo->wait_hsync(); - /* get CCNT */ - CCNT(timer1); - /* Wait after HSync */ - CCNT(timer2); - } - while (timer2 - timer1 < wait_time) - CCNT(timer2); - } - corgi_ssp_ads7846_put(cmd); - if (wait_time && !(pmnc & 0x01)) - PMNC_SET(pmnc); - } - return pos; -} - -static int read_xydata(struct corgi_ts *corgi_ts) -{ - unsigned int x, y, z1, z2; - unsigned long flags, wait_time; - - /* critical section */ - local_irq_save(flags); - corgi_ssp_ads7846_lock(); - wait_time = calc_waittime(corgi_ts); - - /* Y-axis */ - sync_receive_data_send_cmd(corgi_ts, 0, 1, 1u, wait_time); - - /* Y-axis */ - sync_receive_data_send_cmd(corgi_ts, 1, 1, 1u, wait_time); - - /* X-axis */ - y = sync_receive_data_send_cmd(corgi_ts, 1, 1, 5u, wait_time); - - /* Z1 */ - x = sync_receive_data_send_cmd(corgi_ts, 1, 1, 3u, wait_time); - - /* Z2 */ - z1 = sync_receive_data_send_cmd(corgi_ts, 1, 1, 4u, wait_time); - z2 = sync_receive_data_send_cmd(corgi_ts, 1, 0, 4u, wait_time); - - /* Power-Down Enable */ - corgi_ssp_ads7846_put((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - corgi_ssp_ads7846_get(); - - corgi_ssp_ads7846_unlock(); - local_irq_restore(flags); - - if (x== 0 || y == 0 || z1 == 0 || (x * (z2 - z1) / z1) >= 15000) { - corgi_ts->tc.pressure = 0; - return 0; - } - - corgi_ts->tc.x = x; - corgi_ts->tc.y = y; - corgi_ts->tc.pressure = (x * (z2 - z1)) / z1; - return 1; -} - -static void new_data(struct corgi_ts *corgi_ts) -{ - struct input_dev *dev = corgi_ts->input; - - if (corgi_ts->power_mode != PWR_MODE_ACTIVE) - return; - - if (!corgi_ts->tc.pressure && corgi_ts->pendown == 0) - return; - - input_report_abs(dev, ABS_X, corgi_ts->tc.x); - input_report_abs(dev, ABS_Y, corgi_ts->tc.y); - input_report_abs(dev, ABS_PRESSURE, corgi_ts->tc.pressure); - input_report_key(dev, BTN_TOUCH, corgi_ts->pendown); - input_sync(dev); -} - -static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer) -{ - if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) { - /* Disable Interrupt */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_NONE); - if (read_xydata(corgi_ts)) { - corgi_ts->pendown = 1; - new_data(corgi_ts); - } - mod_timer(&corgi_ts->timer, jiffies + HZ / 100); - } else { - if (corgi_ts->pendown == 1 || corgi_ts->pendown == 2) { - mod_timer(&corgi_ts->timer, jiffies + HZ / 100); - corgi_ts->pendown++; - return; - } - - if (corgi_ts->pendown) { - corgi_ts->tc.pressure = 0; - new_data(corgi_ts); - } - - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); - corgi_ts->pendown = 0; - } -} - -static void corgi_ts_timer(unsigned long data) -{ - struct corgi_ts *corgits_data = (struct corgi_ts *) data; - - ts_interrupt_main(corgits_data, 1); -} - -static irqreturn_t ts_interrupt(int irq, void *dev_id) -{ - struct corgi_ts *corgits_data = dev_id; - - ts_interrupt_main(corgits_data, 0); - return IRQ_HANDLED; -} - -#ifdef CONFIG_PM -static int corgits_suspend(struct platform_device *dev, pm_message_t state) -{ - struct corgi_ts *corgi_ts = platform_get_drvdata(dev); - - if (corgi_ts->pendown) { - del_timer_sync(&corgi_ts->timer); - corgi_ts->tc.pressure = 0; - new_data(corgi_ts); - corgi_ts->pendown = 0; - } - corgi_ts->power_mode = PWR_MODE_SUSPEND; - - corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - - return 0; -} - -static int corgits_resume(struct platform_device *dev) -{ - struct corgi_ts *corgi_ts = platform_get_drvdata(dev); - - corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); - corgi_ts->power_mode = PWR_MODE_ACTIVE; - - return 0; -} -#else -#define corgits_suspend NULL -#define corgits_resume NULL -#endif - -static int __devinit corgits_probe(struct platform_device *pdev) -{ - struct corgi_ts *corgi_ts; - struct input_dev *input_dev; - int err = -ENOMEM; - - corgi_ts = kzalloc(sizeof(struct corgi_ts), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!corgi_ts || !input_dev) - goto fail1; - - platform_set_drvdata(pdev, corgi_ts); - - corgi_ts->machinfo = pdev->dev.platform_data; - corgi_ts->irq_gpio = platform_get_irq(pdev, 0); - - if (corgi_ts->irq_gpio < 0) { - err = -ENODEV; - goto fail1; - } - - corgi_ts->input = input_dev; - - init_timer(&corgi_ts->timer); - corgi_ts->timer.data = (unsigned long) corgi_ts; - corgi_ts->timer.function = corgi_ts_timer; - - input_dev->name = "Corgi Touchscreen"; - input_dev->phys = "corgits/input0"; - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0x0001; - input_dev->id.product = 0x0002; - input_dev->id.version = 0x0100; - input_dev->dev.parent = &pdev->dev; - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); - input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0); - - pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts->irq_gpio) | GPIO_IN); - - /* Initiaize ADS7846 Difference Reference mode */ - corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - corgi_ssp_ads7846_putget((3u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - - if (request_irq(corgi_ts->irq_gpio, ts_interrupt, IRQF_DISABLED, "ts", corgi_ts)) { - err = -EBUSY; - goto fail1; - } - - err = input_register_device(corgi_ts->input); - if (err) - goto fail2; - - corgi_ts->power_mode = PWR_MODE_ACTIVE; - - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); - - return 0; - - fail2: free_irq(corgi_ts->irq_gpio, corgi_ts); - fail1: input_free_device(input_dev); - kfree(corgi_ts); - return err; -} - -static int __devexit corgits_remove(struct platform_device *pdev) -{ - struct corgi_ts *corgi_ts = platform_get_drvdata(pdev); - - free_irq(corgi_ts->irq_gpio, corgi_ts); - del_timer_sync(&corgi_ts->timer); - corgi_ts->machinfo->put_hsync(); - input_unregister_device(corgi_ts->input); - kfree(corgi_ts); - - return 0; -} - -static struct platform_driver corgits_driver = { - .probe = corgits_probe, - .remove = __devexit_p(corgits_remove), - .suspend = corgits_suspend, - .resume = corgits_resume, - .driver = { - .name = "corgi-ts", - .owner = THIS_MODULE, - }, -}; - -static int __init corgits_init(void) -{ - return platform_driver_register(&corgits_driver); -} - -static void __exit corgits_exit(void) -{ - platform_driver_unregister(&corgits_driver); -} - -module_init(corgits_init); -module_exit(corgits_exit); - -MODULE_AUTHOR("Richard Purdie rpurdie@rpsys.net"); -MODULE_DESCRIPTION("Corgi TouchScreen Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:corgi-ts");