From: Lucas Tanure tanureal@opensource.cirrus.com
Rename I2C multi instantiate driver to bus-multi-instantiate for upcoming addition of SPI support
Signed-off-by: Lucas Tanure tanureal@opensource.cirrus.com Signed-off-by: Stefan Binding sbinding@opensource.cirrus.com --- MAINTAINERS | 4 +- drivers/acpi/scan.c | 2 +- drivers/platform/x86/Kconfig | 4 +- drivers/platform/x86/Makefile | 2 +- ...-instantiate.c => bus-multi-instantiate.c} | 89 +++++++++---------- 5 files changed, 50 insertions(+), 51 deletions(-) rename drivers/platform/x86/{i2c-multi-instantiate.c => bus-multi-instantiate.c} (53%)
diff --git a/MAINTAINERS b/MAINTAINERS index 4e828542b089..4a7e3cff9245 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -388,11 +388,11 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: drivers/acpi/arm64
-ACPI I2C MULTI INSTANTIATE DRIVER +ACPI BUS MULTI INSTANTIATE DRIVER M: Hans de Goede hdegoede@redhat.com L: platform-driver-x86@vger.kernel.org S: Maintained -F: drivers/platform/x86/i2c-multi-instantiate.c +F: drivers/platform/x86/bus-multi-instantiate.c
ACPI PCC(Platform Communication Channel) MAILBOX DRIVER M: Sudeep Holla sudeep.holla@arm.com diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 1331756d4cfc..e4fda14572e7 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1738,7 +1738,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device) * must be instantiated for each, each with its own i2c_device_id. * Normally we only instantiate an i2c-client for the first resource, * using the ACPI HID as id. These special cases are handled by the - * drivers/platform/x86/i2c-multi-instantiate.c driver, which knows + * drivers/platform/x86/bus-multi-instantiate.c driver, which knows * which i2c_device_id to use for each resource. */ {"BSG1160", }, diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 24deeeb29af2..616da06aa6b9 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -990,7 +990,7 @@ config TOPSTAR_LAPTOP
If you have a Topstar laptop, say Y or M here.
-config I2C_MULTI_INSTANTIATE +config BUS_MULTI_INSTANTIATE tristate "I2C multi instantiate pseudo device driver" depends on I2C && ACPI help @@ -999,7 +999,7 @@ config I2C_MULTI_INSTANTIATE for each device in the firmware-node.
To compile this driver as a module, choose M here: the module - will be called i2c-multi-instantiate. + will be called bus-multi-instantiate.
config MLX_PLATFORM tristate "Mellanox Technologies platform support" diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index c12a9b044fd8..b5852e3fbab1 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -110,7 +110,7 @@ obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o
# Platform drivers obj-$(CONFIG_FW_ATTR_CLASS) += firmware_attributes_class.o -obj-$(CONFIG_I2C_MULTI_INSTANTIATE) += i2c-multi-instantiate.o +obj-$(CONFIG_BUS_MULTI_INSTANTIATE) += bus-multi-instantiate.o obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o obj-$(CONFIG_TOUCHSCREEN_DMI) += touchscreen_dmi.o obj-$(CONFIG_WIRELESS_HOTKEY) += wireless-hotkey.o diff --git a/drivers/platform/x86/i2c-multi-instantiate.c b/drivers/platform/x86/bus-multi-instantiate.c similarity index 53% rename from drivers/platform/x86/i2c-multi-instantiate.c rename to drivers/platform/x86/bus-multi-instantiate.c index 4956a1df5b90..982dfecfd27c 100644 --- a/drivers/platform/x86/i2c-multi-instantiate.c +++ b/drivers/platform/x86/bus-multi-instantiate.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * I2C multi-instantiate driver, pseudo driver to instantiate multiple + * Bus multi-instantiate driver, pseudo driver to instantiate multiple * i2c-clients from a single fwnode. * * Copyright 2018 Hans de Goede hdegoede@redhat.com @@ -21,29 +21,29 @@ #define IRQ_RESOURCE_GPIO 1 #define IRQ_RESOURCE_APIC 2
-struct i2c_inst_data { +struct bmi_instance { const char *type; unsigned int flags; int irq_idx; };
-struct i2c_multi_inst_data { - int num_clients; - struct i2c_client *clients[]; +struct bmi { + int i2c_num; + struct i2c_client *i2c_devs[]; };
-static int i2c_multi_inst_probe(struct platform_device *pdev) +static int bmi_probe(struct platform_device *pdev) { - struct i2c_multi_inst_data *multi; - const struct i2c_inst_data *inst_data; struct i2c_board_info board_info = {}; + const struct bmi_instance *inst; struct device *dev = &pdev->dev; struct acpi_device *adev; + struct bmi *bmi; char name[32]; int i, ret;
- inst_data = device_get_match_data(dev); - if (!inst_data) { + inst = device_get_match_data(dev); + if (!inst) { dev_err(dev, "Error ACPI match data is missing\n"); return -ENODEV; } @@ -55,33 +55,32 @@ static int i2c_multi_inst_probe(struct platform_device *pdev) if (ret < 0) return ret;
- multi = devm_kmalloc(dev, struct_size(multi, clients, ret), GFP_KERNEL); - if (!multi) + bmi = devm_kmalloc(dev, struct_size(bmi, i2c_devs, ret), GFP_KERNEL); + if (!bmi) return -ENOMEM;
- multi->num_clients = ret; + bmi->i2c_num = ret;
- for (i = 0; i < multi->num_clients && inst_data[i].type; i++) { + for (i = 0; i < bmi->i2c_num && inst[i].type; i++) { memset(&board_info, 0, sizeof(board_info)); - strlcpy(board_info.type, inst_data[i].type, I2C_NAME_SIZE); - snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), - inst_data[i].type, i); + strlcpy(board_info.type, inst[i].type, I2C_NAME_SIZE); + snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst[i].type, i); board_info.dev_name = name; - switch (inst_data[i].flags & IRQ_RESOURCE_TYPE) { + switch (inst[i].flags & IRQ_RESOURCE_TYPE) { case IRQ_RESOURCE_GPIO: - ret = acpi_dev_gpio_irq_get(adev, inst_data[i].irq_idx); + ret = acpi_dev_gpio_irq_get(adev, inst[i].irq_idx); if (ret < 0) { dev_err(dev, "Error requesting irq at index %d: %d\n", - inst_data[i].irq_idx, ret); + inst[i].irq_idx, ret); goto error; } board_info.irq = ret; break; case IRQ_RESOURCE_APIC: - ret = platform_get_irq(pdev, inst_data[i].irq_idx); + ret = platform_get_irq(pdev, inst[i].irq_idx); if (ret < 0) { dev_dbg(dev, "Error requesting irq at index %d: %d\n", - inst_data[i].irq_idx, ret); + inst[i].irq_idx, ret); goto error; } board_info.irq = ret; @@ -90,48 +89,48 @@ static int i2c_multi_inst_probe(struct platform_device *pdev) board_info.irq = 0; break; } - multi->clients[i] = i2c_acpi_new_device(dev, i, &board_info); - if (IS_ERR(multi->clients[i])) { - ret = dev_err_probe(dev, PTR_ERR(multi->clients[i]), + bmi->i2c_devs[i] = i2c_acpi_new_device(dev, i, &board_info); + if (IS_ERR(bmi->i2c_devs[i])) { + ret = dev_err_probe(dev, PTR_ERR(bmi->i2c_devs[i]), "Error creating i2c-client, idx %d\n", i); goto error; } } - if (i < multi->num_clients) { + if (i < bmi->i2c_num) { dev_err(dev, "Error finding driver, idx %d\n", i); ret = -ENODEV; goto error; }
- platform_set_drvdata(pdev, multi); + platform_set_drvdata(pdev, bmi); return 0;
error: while (--i >= 0) - i2c_unregister_device(multi->clients[i]); + i2c_unregister_device(bmi->i2c_devs[i]);
return ret; }
-static int i2c_multi_inst_remove(struct platform_device *pdev) +static int bmi_remove(struct platform_device *pdev) { - struct i2c_multi_inst_data *multi = platform_get_drvdata(pdev); + struct bmi *bmi = platform_get_drvdata(pdev); int i;
- for (i = 0; i < multi->num_clients; i++) - i2c_unregister_device(multi->clients[i]); + for (i = 0; i < bmi->i2c_num; i++) + i2c_unregister_device(bmi->i2c_devs[i]);
return 0; }
-static const struct i2c_inst_data bsg1160_data[] = { +static const struct bmi_instance bsg1160_data[] = { { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 }, { "bmc150_magn" }, { "bmg160" }, {} };
-static const struct i2c_inst_data bsg2150_data[] = { +static const struct bmi_instance bsg2150_data[] = { { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 }, { "bmc150_magn" }, /* The resources describe a 3th client, but it is not really there. */ @@ -139,7 +138,7 @@ static const struct i2c_inst_data bsg2150_data[] = { {} };
-static const struct i2c_inst_data int3515_data[] = { +static const struct bmi_instance int3515_data[] = { { "tps6598x", IRQ_RESOURCE_APIC, 0 }, { "tps6598x", IRQ_RESOURCE_APIC, 1 }, { "tps6598x", IRQ_RESOURCE_APIC, 2 }, @@ -148,27 +147,27 @@ static const struct i2c_inst_data int3515_data[] = { };
/* - * Note new device-ids must also be added to i2c_multi_instantiate_ids in + * Note new device-ids must also be added to bus_multi_instantiate_ids in * drivers/acpi/scan.c: acpi_device_enumeration_by_parent(). */ -static const struct acpi_device_id i2c_multi_inst_acpi_ids[] = { +static const struct acpi_device_id bmi_acpi_ids[] = { { "BSG1160", (unsigned long)bsg1160_data }, { "BSG2150", (unsigned long)bsg2150_data }, { "INT3515", (unsigned long)int3515_data }, { } }; -MODULE_DEVICE_TABLE(acpi, i2c_multi_inst_acpi_ids); +MODULE_DEVICE_TABLE(acpi, bmi_acpi_ids);
-static struct platform_driver i2c_multi_inst_driver = { +static struct platform_driver bmi_driver = { .driver = { - .name = "I2C multi instantiate pseudo device driver", - .acpi_match_table = i2c_multi_inst_acpi_ids, + .name = "Bus multi instantiate pseudo device driver", + .acpi_match_table = bmi_acpi_ids, }, - .probe = i2c_multi_inst_probe, - .remove = i2c_multi_inst_remove, + .probe = bmi_probe, + .remove = bmi_remove, }; -module_platform_driver(i2c_multi_inst_driver); +module_platform_driver(bmi_driver);
-MODULE_DESCRIPTION("I2C multi instantiate pseudo device driver"); +MODULE_DESCRIPTION("Bus multi instantiate pseudo device driver"); MODULE_AUTHOR("Hans de Goede hdegoede@redhat.com"); MODULE_LICENSE("GPL");