Implement support for the Marvell Zylonite PXA3xx reference platform, supporting standard AC97 stereo and AUX interfaces together with the auxiliary I2S interface of the WM9713.
The board has two options for the MCLK of the WM9713: either the standard AC97 system clock can be used or the 13MHz CLK_POUT output of the PXA3xx can be used, selected via SW15 on the board. Currently only the AC97 system clock is supported by this driver.
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/pxa/Makefile | 2 + sound/soc/pxa/zylonite.c | 219 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 221 insertions(+), 0 deletions(-) create mode 100644 sound/soc/pxa/zylonite.c
diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index 1a3a36e..08a9f27 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -17,6 +17,7 @@ snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o snd-soc-palm27x-objs := palm27x.o +snd-soc-zylonite-objs := zylonite.o
obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o @@ -25,3 +26,4 @@ obj-$(CONFIG_SND_PXA2XX_SOC_E800) += snd-soc-e800.o obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o obj-$(CONFIG_SND_PXA2XX_SOC_EM_X270) += snd-soc-em-x270.o obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o +obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c new file mode 100644 index 0000000..842d650 --- /dev/null +++ b/sound/soc/pxa/zylonite.c @@ -0,0 +1,219 @@ +/* + * zylonite.c -- SoC audio for Zylonite + * + * Copyright 2008 Wolfson Microelectronics PLC. + * Author: Mark Brown broonie@opensource.wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include "../codecs/wm9713.h" +#include "pxa2xx-pcm.h" +#include "pxa2xx-ac97.h" +#include "pxa-ssp.h" + +static struct snd_soc_card zylonite; + +static const struct snd_soc_dapm_widget zylonite_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone", NULL), + SND_SOC_DAPM_MIC("Headset Microphone", NULL), + SND_SOC_DAPM_MIC("Handset Microphone", NULL), + SND_SOC_DAPM_SPK("Multiactor", NULL), + SND_SOC_DAPM_SPK("Headset Earpiece", NULL), +}; + +/* Currently supported audio map */ +static const struct snd_soc_dapm_route audio_map[] = { + + /* Headphone output connected to HPL/HPR */ + { "Headphone", NULL, "HPL" }, + { "Headphone", NULL, "HPR" }, + + /* On-board earpiece */ + { "Headset Earpiece", NULL, "OUT3" }, + + /* Headphone mic */ + { "MIC2A", NULL, "Mic Bias" }, + { "Mic Bias", NULL, "Headset Microphone" }, + + /* On-board mic */ + { "MIC1", NULL, "Mic Bias" }, + { "Mic Bias", NULL, "Handset Microphone" }, + + /* Multiactor differentially connected over SPKL/SPKR */ + { "Multiactor", NULL, "SPKL" }, + { "Multiactor", NULL, "SPKR" }, +}; + +static int zylonite_wm9713_init(struct snd_soc_codec *codec) +{ + /* Currently we only support use of the AC97 clock here. If + * CLK_POUT is selected by SW15 then the clock API will need + * to be used to request and enable it here. + */ + + snd_soc_dapm_new_controls(codec, zylonite_dapm_widgets, + ARRAY_SIZE(zylonite_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + /* Static setup for now */ + snd_soc_dapm_enable_pin(codec, "Headphone"); + snd_soc_dapm_enable_pin(codec, "Headset Earpiece"); + + snd_soc_dapm_sync(codec); + return 0; +} + +static int zylonite_voice_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + unsigned int pll_out = 0; + unsigned int acds = 0; + unsigned int wm9713_div = 0; + int ret = 0; + + switch (params_rate(params)) { + case 8000: + wm9713_div = 12; + pll_out = 2048000; + break; + case 16000: + wm9713_div = 6; + pll_out = 4096000; + break; + case 48000: + default: + wm9713_div = 2; + pll_out = 12288000; + acds = 1; + break; + } + + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_tdm_slot(cpu_dai, + params_channels(params), + params_channels(params)); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, pll_out); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, PXA_SSP_AUDIO_DIV_ACDS, acds); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_AUDIO, 0, 1); + if (ret < 0) + return ret; + + /* Note that if the PLL is in use the WM9713_PCMCLK_PLL_DIV needs + * to be set instead. + */ + ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_DIV, + WM9713_PCMDIV(wm9713_div)); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops zylonite_voice_ops = { + .hw_params = zylonite_voice_hw_params, +}; + +static struct snd_soc_dai_link zylonite_dai[] = { +{ + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI], + .codec_dai = &wm9713_dai[WM9713_DAI_AC97_HIFI], + .init = zylonite_wm9713_init, +}, +{ + .name = "AC97 Aux", + .stream_name = "AC97 Aux", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX], + .codec_dai = &wm9713_dai[WM9713_DAI_AC97_AUX], +}, +{ + .name = "WM9713 Voice", + .stream_name = "WM9713 Voice", + .cpu_dai = &pxa_ssp_dai[PXA_DAI_SSP3], + .codec_dai = &wm9713_dai[WM9713_DAI_PCM_VOICE], + .ops = &zylonite_voice_ops, +}, +}; + +static struct snd_soc_card zylonite = { + .name = "Zylonite", + .dai_link = zylonite_dai, + .num_links = ARRAY_SIZE(zylonite_dai), +}; + +static struct snd_soc_device zylonite_snd_ac97_devdata = { + .card = &zylonite, + .platform = &pxa2xx_soc_platform, + .codec_dev = &soc_codec_dev_wm9713, +}; + +static struct platform_device *zylonite_snd_ac97_device; + +static int __init zylonite_init(void) +{ + int ret; + + zylonite_snd_ac97_device = platform_device_alloc("soc-audio", -1); + if (!zylonite_snd_ac97_device) + return -ENOMEM; + + platform_set_drvdata(zylonite_snd_ac97_device, + &zylonite_snd_ac97_devdata); + zylonite_snd_ac97_devdata.dev = &zylonite_snd_ac97_device->dev; + + ret = platform_device_add(zylonite_snd_ac97_device); + if (ret != 0) + platform_device_put(zylonite_snd_ac97_device); + + return ret; +} + +static void __exit zylonite_exit(void) +{ + platform_device_unregister(zylonite_snd_ac97_device); +} + +module_init(zylonite_init); +module_exit(zylonite_exit); + +MODULE_AUTHOR("Mark Brown broonie@opensource.wolfsonmicro.com"); +MODULE_DESCRIPTION("ALSA SoC WM9713 Zylonite"); +MODULE_LICENSE("GPL");