From: Conner Knox connerknoxpublic@gmail.com
Add support for Avid Mbox3 USB audio interface at 48kHz
Signed-off-by: Conner Knox connerknoxpublic@gmail.com --- :Added some sane defaults for Stereo to work correctly. :Added comments to specify the complete interface api. :Cleaned up coding style
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index f93201a83..06dfdd45c 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -2985,6 +2985,82 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, +/* DIGIDESIGN MBOX 3 */ +{ + USB_DEVICE(0x0dba, 0x5000), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Digidesign", + .product_name = "Mbox 3", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 1, + .type = QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 2, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 4, + .iface = 2, + .altsetting = 1, + .altset_idx = 1, + .attributes = 0x00, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC | + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + { + .ifnum = 3, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 4, + .iface = 3, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x81, + .attributes = 0x00, + .ep_attr = USB_ENDPOINT_XFER_ISOC | + USB_ENDPOINT_SYNC_ASYNC, + .maxpacksize = 0x009c, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + { + .ifnum = 4, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = &(const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0001, + .in_cables = 0x0001 + } + }, + { + .ifnum = -1 + } + } + } +}, { /* Tascam US122 MKII - playback-only support */ USB_DEVICE_VENDOR_SPEC(0x0644, 0x8021), diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 968d90cae..1d818ee64 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1020,6 +1020,304 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev) return 0; }
+static void mbox3_setup_48_24_magic(struct usb_device *dev) +{ + /* The Mbox 3 is "little endian" */ + /* max volume is: 0x0000. */ + /* min volume is: 0x0080 (shown in little endian form) */ + + + /* Load 48000Hz rate into buffer */ + u8 com_buff[4] = {0x80, 0xbb, 0x00, 0x00}; + + /* Set 48000Hz sample rate */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0100, 0x0001, &com_buff, 4); //Is this really needed? + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0100, 0x8101, &com_buff, 4); + + /* Deactivate Tuner */ + /* on = 0x01*/ + /* off = 0x00*/ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0003, 0x2001, &com_buff, 1); + + /* Set clock source to Internal (as opposed to S/PDIF) */ + com_buff[0] = 0x01; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x8001, &com_buff, 1); + + /* Mute the hardware loopbacks to start the device in a known state. */ + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue input 1 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0110, 0x4001, &com_buff, 2); + /* Analogue input 1 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0111, 0x4001, &com_buff, 2); + /* Analogue input 2 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0114, 0x4001, &com_buff, 2); + /* Analogue input 2 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0115, 0x4001, &com_buff, 2); + /* Analogue input 3 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0118, 0x4001, &com_buff, 2); + /* Analogue input 3 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0119, 0x4001, &com_buff, 2); + /* Analogue input 4 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011c, 0x4001, &com_buff, 2); + /* Analogue input 4 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011d, 0x4001, &com_buff, 2); + + /* Set software sends to output */ + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* Analogue software return 1 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x4001, &com_buff, 2); + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue software return 1 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0101, 0x4001, &com_buff, 2); + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue software return 2 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0104, 0x4001, &com_buff, 2); + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* Analogue software return 2 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0105, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue software return 3 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0108, 0x4001, &com_buff, 2); + /* Analogue software return 3 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0109, 0x4001, &com_buff, 2); + /* Analogue software return 4 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010c, 0x4001, &com_buff, 2); + /* Analogue software return 4 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010d, 0x4001, &com_buff, 2); + + /* Return to muting sends */ + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue fx return left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0120, 0x4001, &com_buff, 2); + /* Analogue fx return right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0121, 0x4001, &com_buff, 2); + + /* Analogue software input 1 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x4201, &com_buff, 2); + /* Analogue software input 2 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0101, 0x4201, &com_buff, 2); + /* Analogue software input 3 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0102, 0x4201, &com_buff, 2); + /* Analogue software input 4 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0103, 0x4201, &com_buff, 2); + /* Analogue input 1 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0104, 0x4201, &com_buff, 2); + /* Analogue input 2 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0105, 0x4201, &com_buff, 2); + /* Analogue input 3 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0106, 0x4201, &com_buff, 2); + /* Analogue input 4 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0107, 0x4201, &com_buff, 2); + + /* Toggle allowing host control */ + com_buff[0] = 0x02; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0000, 0x2001, &com_buff, 1); + + /* Do not dim fx returns */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0002, 0x2001, &com_buff, 1); + + /* Do not set fx returns to mono */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0001, 0x2001, &com_buff, 1); + + /* Mute the S/PDIF hardware loopback + * same odd volume logic here as above + */ + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* S/PDIF hardware input 1 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0112, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 1 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0113, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 2 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0116, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 2 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0117, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 3 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011a, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 3 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011b, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 4 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011e, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 4 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011f, 0x4001, &com_buff, 2); + /* S/PDIF software return 1 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0102, 0x4001, &com_buff, 2); + /* S/PDIF software return 1 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0103, 0x4001, &com_buff, 2); + /* S/PDIF software return 2 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0106, 0x4001, &com_buff, 2); + /* S/PDIF software return 2 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0107, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* S/PDIF software return 3 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010a, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* S/PDIF software return 3 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010b, 0x4001, &com_buff, 2); + /* S/PDIF software return 4 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010e, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* S/PDIF software return 4 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010f, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* S/PDIF fx returns left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0122, 0x4001, &com_buff, 2); + /* S/PDIF fx returns right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0123, 0x4001, &com_buff, 2); + + /* Set the dropdown "Effect" to the first option */ + /* Room1 = 0x00 */ + /* Room2 = 0x01 */ + /* Room3 = 0x02 */ + /* Hall 1 = 0x03 */ + /* Hall 2 = 0x04 */ + /* Plate = 0x05 */ + /* Delay = 0x06 */ + /* Echo = 0x07 */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0200, 0x4301, &com_buff, 1); /* max is 0xff */ + /* min is 0x00 */ + + + /* Set the effect duration to 0 */ + /* max is 0xffff */ + /* min is 0x0000 */ + com_buff[0] = 0x00; + com_buff[1] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0400, 0x4301, &com_buff, 2); + + /* Set the effect volume and feedback to 0 */ + /* max is 0xff */ + /* min is 0x00 */ + com_buff[0] = 0x00; + /* feedback: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0500, 0x4301, &com_buff, 1); + /* volume: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0300, 0x4301, &com_buff, 1); + + /* Set soft button hold duration */ + /* 0x03 = 250ms */ + /* 0x05 = 500ms DEFAULT */ + /* 0x08 = 750ms */ + /* 0x0a = 1sec */ + com_buff[0] = 0x05; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0005, 0x2001, &com_buff, 1); + + /* Use dim LEDs for button of state */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0004, 0x2001, &com_buff, 1); +} + +#define MBOX3_DESCRIPTOR_SIZE 464 + +static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) +{ + struct usb_host_config *config = dev->actconfig; + int err; + int descriptor_size; + + descriptor_size = le16_to_cpu(get_cfg_desc(config)->wTotalLength); + + if (descriptor_size != MBOX3_DESCRIPTOR_SIZE) { + dev_err(&dev->dev, "Invalid descriptor size=%d.\n", descriptor_size); + return -ENODEV; + } + + dev_dbg(&dev->dev, "device initialised!\n"); + + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, + &dev->descriptor, sizeof(dev->descriptor)); + config = dev->actconfig; + if (err < 0) + dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); + + err = usb_reset_configuration(dev); + if (err < 0) + dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); + dev_dbg(&dev->dev, "mbox3_boot: new boot length = %d\n", + le16_to_cpu(get_cfg_desc(config)->wTotalLength)); + + mbox3_setup_48_24_magic(dev); + dev_info(&dev->dev, "Digidesign Mbox 3: 24bit 48kHz"); + + return 0; /* Successful boot */ +}
#define MICROBOOK_BUF_SIZE 128
@@ -1324,6 +1622,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, case USB_ID(0x0dba, 0x3000): /* Digidesign Mbox 2 */ return snd_usb_mbox2_boot_quirk(dev); + case USB_ID(0x0dba, 0x5000): + /* Digidesign Mbox 3 */ + return snd_usb_mbox3_boot_quirk(dev); +
case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */ case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */