The patch
ASoC: uniphier: add syscon property to binding document
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 8bde8fd64d1b8f8bc1577e28ff412553597b6adb Mon Sep 17 00:00:00 2001
From: Katsuhiro Suzuki suzuki.katsuhiro@socionext.com Date: Fri, 16 Mar 2018 16:08:12 +0900 Subject: [PATCH] ASoC: uniphier: add syscon property to binding document
This patch adds syscon property for specifying soc-glue core into DT binding documentation.
Currently, soc-glue core is used for changing the state of S/PDIF signal output pin to signal output state or Hi-Z state. If you don't need to use features on soc-glue described above you can ommit this property.
Signed-off-by: Katsuhiro Suzuki suzuki.katsuhiro@socionext.com Signed-off-by: Mark Brown broonie@kernel.org --- Documentation/devicetree/bindings/sound/uniphier,aio.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/uniphier,aio.txt b/Documentation/devicetree/bindings/sound/uniphier,aio.txt index 65d71cf6ef0f..4ce68ed6f2f2 100644 --- a/Documentation/devicetree/bindings/sound/uniphier,aio.txt +++ b/Documentation/devicetree/bindings/sound/uniphier,aio.txt @@ -22,6 +22,12 @@ Required properties: entry in reset-names. - #sound-dai-cells: should be 1.
+Optional properties: +- socionext,syscon: a phandle, should contain soc-glue. + The soc-glue is used for changing mode of S/PDIF signal pin + to Output from Hi-Z. This property is optional if you use + I2S signal pins only. + Example: audio { compatible = "socionext,uniphier-ld20-aio"; @@ -34,4 +40,6 @@ Example: reset-names = "aio"; resets = <&sys_rst 40>; #sound-dai-cells = <1>; + + socionext,syscon = <&sg>; };