On Thu, Apr 07, 2022 at 10:08:38AM +0800, Shengjiu Wang wrote:
On Mon, Mar 28, 2022 at 7:28 PM Sascha Hauer <[1]s.hauer@pengutronix.de> wrote:
Use GENMASK along with FIELD_PREP and FIELD_GET to access bitfields in registers to straighten register access and to drop a lot of defines. Signed-off-by: Sascha Hauer <[2]s.hauer@pengutronix.de> --- Notes: Changes since v1: - add missing include linux/bitfield.h sound/soc/fsl/fsl_micfil.c | 52 ++++++------- sound/soc/fsl/fsl_micfil.h | 147 ++++++++----------------------------- 2 files changed, 58 insertions(+), 141 deletions(-) diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c index 878d24fde3581..cfa8af668d921 100644 --- a/sound/soc/fsl/fsl_micfil.c +++ b/sound/soc/fsl/fsl_micfil.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright 2018 NXP +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/device.h> #include <linux/interrupt.h> @@ -116,23 +117,22 @@ static inline int get_pdm_clk(struct fsl_micfil *micfil, int bclk; regmap_read(micfil->regmap, REG_MICFIL_CTRL2, &ctrl2_reg); - osr = 16 - ((ctrl2_reg & MICFIL_CTRL2_CICOSR_MASK) - >> MICFIL_CTRL2_CICOSR_SHIFT); - qsel = ctrl2_reg & MICFIL_CTRL2_QSEL_MASK; + osr = 16 - FIELD_GET(MICFIL_CTRL2_CICOSR, ctrl2_reg); + qsel = FIELD_GET(MICFIL_CTRL2_QSEL, ctrl2_reg); switch (qsel) { - case MICFIL_HIGH_QUALITY: + case MICFIL_QSEL_HIGH_QUALITY: bclk = rate * 8 * osr / 2; /* kfactor = 0.5 */ break; - case MICFIL_MEDIUM_QUALITY: - case MICFIL_VLOW0_QUALITY: + case MICFIL_QSEL_MEDIUM_QUALITY: + case MICFIL_QSEL_VLOW0_QUALITY: bclk = rate * 4 * osr * 1; /* kfactor = 1 */ break; - case MICFIL_LOW_QUALITY: - case MICFIL_VLOW1_QUALITY: + case MICFIL_QSEL_LOW_QUALITY: + case MICFIL_QSEL_VLOW1_QUALITY: bclk = rate * 2 * osr * 2; /* kfactor = 2 */ break; - case MICFIL_VLOW2_QUALITY: + case MICFIL_QSEL_VLOW2_QUALITY: bclk = rate * osr * 4; /* kfactor = 4 */ break; default: @@ -244,8 +244,8 @@ static int fsl_micfil_trigger(struct snd_pcm_substream *substream, int cmd, * 11 - reserved */ ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1, - MICFIL_CTRL1_DISEL_MASK, - (1 << MICFIL_CTRL1_DISEL_SHIFT)); + MICFIL_CTRL1_DISEL, + FIELD_PREP(MICFIL_CTRL1_DISEL, MICFIL_CTRL1_DISEL_DMA));Alignment should match open parenthesis?
Generally yes, but in this case this would introduce an additional linebreak inside the FIELD_PREP macro which reduces readability:
Instead of:
ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1, MICFIL_CTRL1_DISEL, FIELD_PREP(MICFIL_CTRL1_DISEL, MICFIL_CTRL1_DISEL_DMA));
We would have:
ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1, MICFIL_CTRL1_DISEL, FIELD_PREP(MICFIL_CTRL1_DISEL, MICFIL_CTRL1_DISEL_DMA));
ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1, - MICFIL_CTRL1_DISEL_MASK, - (0 << MICFIL_CTRL1_DISEL_SHIFT)); + MICFIL_CTRL1_DISEL, + FIELD_PREP(MICFIL_CTRL1_DISEL, MICFIL_CTRL1_DISEL_DISABLE));Alignment should match open parenthesis?
Same here.
if (ret) { dev_err(dev, "failed to update DISEL bits\n"); return ret; @@ -300,8 +300,8 @@ static int fsl_set_clock_params(struct device *dev, unsigned int rate) /* set CICOSR */ ret |= regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL2, - MICFIL_CTRL2_CICOSR_MASK, - MICFIL_CTRL2_OSR_DEFAULT); + MICFIL_CTRL2_CICOSR, + FIELD_PREP(MICFIL_CTRL2_CICOSR, MICFIL_CTRL2_CICOSR_DEFAULT));Alignment should match open parenthesis?
This is fixed in one of the next patches where the '|=' is replaced with '='. It reduces the number of lines changed in that patch, so I think this is ok here.
if (ret) dev_err(dev, "failed to set CICOSR in reg 0x%X\n", REG_MICFIL_CTRL2); @@ -312,7 +312,8 @@ static int fsl_set_clock_params(struct device *dev, unsigned int rate) ret = -EINVAL; ret |= regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL2, - MICFIL_CTRL2_CLKDIV_MASK, clk_div); + MICFIL_CTRL2_CLKDIV, + FIELD_PREP(MICFIL_CTRL2_CLKDIV, clk_div));Alignment should match open parenthesis?
Ditto.
Sascha