From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
Now we can replace Codec to Component. Let's do it.
Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1
Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com --- sound/soc/codecs/wm8955.c | 189 ++++++++++++++++++++++------------------------ 1 file changed, 91 insertions(+), 98 deletions(-)
diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c index 1edc7b1..ba44e3d 100644 --- a/sound/soc/codecs/wm8955.c +++ b/sound/soc/codecs/wm8955.c @@ -128,9 +128,9 @@ static bool wm8955_volatile(struct device *dev, unsigned int reg) } }
-static int wm8955_reset(struct snd_soc_codec *codec) +static int wm8955_reset(struct snd_soc_component *component) { - return snd_soc_write(codec, WM8955_RESET, 0); + return snd_soc_component_write(component, WM8955_RESET, 0); }
struct pll_factors { @@ -242,9 +242,9 @@ static int wm8995_pll_factors(struct device *dev, { 11289600, 88200, 0, 31, }, };
-static int wm8955_configure_clocking(struct snd_soc_codec *codec) +static int wm8955_configure_clocking(struct snd_soc_component *component) { - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); int i, ret, val; int clocking = 0; int srate = 0; @@ -267,7 +267,7 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec)
/* We should never get here with an unsupported sample rate */ if (sr == -1) { - dev_err(codec->dev, "Sample rate %dHz unsupported\n", + dev_err(component->dev, "Sample rate %dHz unsupported\n", wm8955->fs); WARN_ON(sr == -1); return -EINVAL; @@ -282,30 +282,30 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec)
/* Use the last divider configuration we saw for the * sample rate. */ - ret = wm8995_pll_factors(codec->dev, wm8955->mclk_rate, + ret = wm8995_pll_factors(component->dev, wm8955->mclk_rate, clock_cfgs[sr].mclk, &pll); if (ret != 0) { - dev_err(codec->dev, + dev_err(component->dev, "Unable to generate %dHz from %dHz MCLK\n", wm8955->fs, wm8955->mclk_rate); return -EINVAL; }
- snd_soc_update_bits(codec, WM8955_PLL_CONTROL_1, + snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_1, WM8955_N_MASK | WM8955_K_21_18_MASK, (pll.n << WM8955_N_SHIFT) | pll.k >> 18); - snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2, + snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_2, WM8955_K_17_9_MASK, (pll.k >> 9) & WM8955_K_17_9_MASK); - snd_soc_update_bits(codec, WM8955_PLL_CONTROL_3, + snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_3, WM8955_K_8_0_MASK, pll.k & WM8955_K_8_0_MASK); if (pll.k) - snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4, + snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_4, WM8955_KEN, WM8955_KEN); else - snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4, + snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_4, WM8955_KEN, 0);
if (pll.outdiv) @@ -314,17 +314,17 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec) val = WM8955_PLL_RB;
/* Now start the PLL running */ - snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL, WM8955_PLL_RB | WM8955_PLLOUTDIV2, val); - snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL, WM8955_PLLEN, WM8955_PLLEN); }
srate = clock_cfgs[sr].usb | (clock_cfgs[sr].sr << WM8955_SR_SHIFT);
- snd_soc_update_bits(codec, WM8955_SAMPLE_RATE, + snd_soc_component_update_bits(component, WM8955_SAMPLE_RATE, WM8955_USB | WM8955_SR_MASK, srate); - snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL, WM8955_MCLKSEL, clocking);
return 0; @@ -333,22 +333,22 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec) static int wm8955_sysclk(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { - struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); int ret = 0;
/* Always disable the clocks - if we're doing reconfiguration this * avoids misclocking. */ - snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1, WM8955_DIGENB, 0); - snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL, WM8955_PLL_RB | WM8955_PLLEN, 0);
switch (event) { case SND_SOC_DAPM_POST_PMD: break; case SND_SOC_DAPM_PRE_PMU: - ret = wm8955_configure_clocking(codec); + ret = wm8955_configure_clocking(component); break; default: ret = -EINVAL; @@ -360,9 +360,9 @@ static int wm8955_sysclk(struct snd_soc_dapm_widget *w,
static int deemph_settings[] = { 0, 32000, 44100, 48000 };
-static int wm8955_set_deemph(struct snd_soc_codec *codec) +static int wm8955_set_deemph(struct snd_soc_component *component) { - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); int val, i, best;
/* If we're using deemphasis select the nearest available sample @@ -381,17 +381,17 @@ static int wm8955_set_deemph(struct snd_soc_codec *codec) val = 0; }
- dev_dbg(codec->dev, "Set deemphasis %d\n", val); + dev_dbg(component->dev, "Set deemphasis %d\n", val);
- return snd_soc_update_bits(codec, WM8955_DAC_CONTROL, + return snd_soc_component_update_bits(component, WM8955_DAC_CONTROL, WM8955_DEEMPH_MASK, val); }
static int wm8955_get_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { - struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
ucontrol->value.integer.value[0] = wm8955->deemph; return 0; @@ -400,8 +400,8 @@ static int wm8955_get_deemph(struct snd_kcontrol *kcontrol, static int wm8955_put_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { - struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); unsigned int deemph = ucontrol->value.integer.value[0];
if (deemph > 1) @@ -409,7 +409,7 @@ static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
wm8955->deemph = deemph;
- return wm8955_set_deemph(codec); + return wm8955_set_deemph(component); }
static const char *bass_mode_text[] = { @@ -592,8 +592,8 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { - struct snd_soc_codec *codec = dai->codec; - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = dai->component; + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); int ret; int wl;
@@ -613,25 +613,25 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream, default: return -EINVAL; } - snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE, + snd_soc_component_update_bits(component, WM8955_AUDIO_INTERFACE, WM8955_WL_MASK, wl);
wm8955->fs = params_rate(params); - wm8955_set_deemph(codec); + wm8955_set_deemph(component);
/* If the chip is clocked then disable the clocks and force a * reconfiguration, otherwise DAPM will power up the * clocks for us later. */ - ret = snd_soc_read(codec, WM8955_POWER_MANAGEMENT_1); + ret = snd_soc_component_read32(component, WM8955_POWER_MANAGEMENT_1); if (ret < 0) return ret; if (ret & WM8955_DIGENB) { - snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1, WM8955_DIGENB, 0); - snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL, WM8955_PLL_RB | WM8955_PLLEN, 0);
- wm8955_configure_clocking(codec); + wm8955_configure_clocking(component); }
return 0; @@ -641,8 +641,8 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream, static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id, unsigned int freq, int dir) { - struct snd_soc_codec *codec = dai->codec; - struct wm8955_priv *priv = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = dai->component; + struct wm8955_priv *priv = snd_soc_component_get_drvdata(component); int div;
switch (clk_id) { @@ -655,7 +655,7 @@ static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id, div = 0; }
- snd_soc_update_bits(codec, WM8955_SAMPLE_RATE, + snd_soc_component_update_bits(component, WM8955_SAMPLE_RATE, WM8955_MCLKDIV2, div); break;
@@ -670,7 +670,7 @@ static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id,
static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) { - struct snd_soc_codec *codec = dai->codec; + struct snd_soc_component *component = dai->component; u16 aif = 0;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { @@ -739,7 +739,7 @@ static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) return -EINVAL; }
- snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE, + snd_soc_component_update_bits(component, WM8955_AUDIO_INTERFACE, WM8955_MS | WM8955_FORMAT_MASK | WM8955_BCLKINV | WM8955_LRP, aif);
@@ -749,7 +749,7 @@ static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute) { - struct snd_soc_codec *codec = codec_dai->codec; + struct snd_soc_component *component = codec_dai->component; int val;
if (mute) @@ -757,15 +757,15 @@ static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute) else val = 0;
- snd_soc_update_bits(codec, WM8955_DAC_CONTROL, WM8955_DACMU, val); + snd_soc_component_update_bits(component, WM8955_DAC_CONTROL, WM8955_DACMU, val);
return 0; }
-static int wm8955_set_bias_level(struct snd_soc_codec *codec, +static int wm8955_set_bias_level(struct snd_soc_component *component, enum snd_soc_bias_level level) { - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); int ret;
switch (level) { @@ -774,22 +774,22 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec,
case SND_SOC_BIAS_PREPARE: /* VMID resistance 2*50k */ - snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1, WM8955_VMIDSEL_MASK, 0x1 << WM8955_VMIDSEL_SHIFT);
/* Default bias current */ - snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1, + snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_1, WM8955_VSEL_MASK, 0x2 << WM8955_VSEL_SHIFT); break;
case SND_SOC_BIAS_STANDBY: - if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { + if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) { ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); if (ret != 0) { - dev_err(codec->dev, + dev_err(component->dev, "Failed to enable supplies: %d\n", ret); return ret; @@ -798,7 +798,7 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec, regcache_sync(wm8955->regmap);
/* Enable VREF and VMID */ - snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1, WM8955_VREF | WM8955_VMIDSEL_MASK, WM8955_VREF | @@ -808,29 +808,29 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec, msleep(500);
/* High resistance VROI to maintain outputs */ - snd_soc_update_bits(codec, + snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_3, WM8955_VROI, WM8955_VROI); }
/* Maintain VMID with 2*250k */ - snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1, WM8955_VMIDSEL_MASK, 0x2 << WM8955_VMIDSEL_SHIFT);
/* Minimum bias current */ - snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1, + snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_1, WM8955_VSEL_MASK, 0); break;
case SND_SOC_BIAS_OFF: /* Low resistance VROI to help discharge */ - snd_soc_update_bits(codec, + snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_3, WM8955_VROI, 0);
/* Turn off VMID and VREF */ - snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1, WM8955_VREF | WM8955_VMIDSEL_MASK, 0);
@@ -865,70 +865,70 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec, .ops = &wm8955_dai_ops, };
-static int wm8955_probe(struct snd_soc_codec *codec) +static int wm8955_probe(struct snd_soc_component *component) { - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); - struct wm8955_pdata *pdata = dev_get_platdata(codec->dev); + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); + struct wm8955_pdata *pdata = dev_get_platdata(component->dev); int ret, i;
for (i = 0; i < ARRAY_SIZE(wm8955->supplies); i++) wm8955->supplies[i].supply = wm8955_supply_names[i];
- ret = devm_regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8955->supplies), + ret = devm_regulator_bulk_get(component->dev, ARRAY_SIZE(wm8955->supplies), wm8955->supplies); if (ret != 0) { - dev_err(codec->dev, "Failed to request supplies: %d\n", ret); + dev_err(component->dev, "Failed to request supplies: %d\n", ret); return ret; }
ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); if (ret != 0) { - dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); + dev_err(component->dev, "Failed to enable supplies: %d\n", ret); return ret; }
- ret = wm8955_reset(codec); + ret = wm8955_reset(component); if (ret < 0) { - dev_err(codec->dev, "Failed to issue reset: %d\n", ret); + dev_err(component->dev, "Failed to issue reset: %d\n", ret); goto err_enable; }
/* Change some default settings - latch VU and enable ZC */ - snd_soc_update_bits(codec, WM8955_LEFT_DAC_VOLUME, + snd_soc_component_update_bits(component, WM8955_LEFT_DAC_VOLUME, WM8955_LDVU, WM8955_LDVU); - snd_soc_update_bits(codec, WM8955_RIGHT_DAC_VOLUME, + snd_soc_component_update_bits(component, WM8955_RIGHT_DAC_VOLUME, WM8955_RDVU, WM8955_RDVU); - snd_soc_update_bits(codec, WM8955_LOUT1_VOLUME, + snd_soc_component_update_bits(component, WM8955_LOUT1_VOLUME, WM8955_LO1VU | WM8955_LO1ZC, WM8955_LO1VU | WM8955_LO1ZC); - snd_soc_update_bits(codec, WM8955_ROUT1_VOLUME, + snd_soc_component_update_bits(component, WM8955_ROUT1_VOLUME, WM8955_RO1VU | WM8955_RO1ZC, WM8955_RO1VU | WM8955_RO1ZC); - snd_soc_update_bits(codec, WM8955_LOUT2_VOLUME, + snd_soc_component_update_bits(component, WM8955_LOUT2_VOLUME, WM8955_LO2VU | WM8955_LO2ZC, WM8955_LO2VU | WM8955_LO2ZC); - snd_soc_update_bits(codec, WM8955_ROUT2_VOLUME, + snd_soc_component_update_bits(component, WM8955_ROUT2_VOLUME, WM8955_RO2VU | WM8955_RO2ZC, WM8955_RO2VU | WM8955_RO2ZC); - snd_soc_update_bits(codec, WM8955_MONOOUT_VOLUME, + snd_soc_component_update_bits(component, WM8955_MONOOUT_VOLUME, WM8955_MOZC, WM8955_MOZC);
/* Also enable adaptive bass boost by default */ - snd_soc_update_bits(codec, WM8955_BASS_CONTROL, WM8955_BB, WM8955_BB); + snd_soc_component_update_bits(component, WM8955_BASS_CONTROL, WM8955_BB, WM8955_BB);
/* Set platform data values */ if (pdata) { if (pdata->out2_speaker) - snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_2, + snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_2, WM8955_ROUT2INV, WM8955_ROUT2INV);
if (pdata->monoin_diff) - snd_soc_update_bits(codec, WM8955_MONO_OUT_MIX_1, + snd_soc_component_update_bits(component, WM8955_MONO_OUT_MIX_1, WM8955_DMEN, WM8955_DMEN); }
- snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_STANDBY); + snd_soc_component_force_bias_level(component, SND_SOC_BIAS_STANDBY);
/* Bias level configuration will have done an extra enable */ regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); @@ -940,19 +940,20 @@ static int wm8955_probe(struct snd_soc_codec *codec) return ret; }
-static const struct snd_soc_codec_driver soc_codec_dev_wm8955 = { - .probe = wm8955_probe, - .set_bias_level = wm8955_set_bias_level, - .suspend_bias_off = true, - - .component_driver = { - .controls = wm8955_snd_controls, - .num_controls = ARRAY_SIZE(wm8955_snd_controls), - .dapm_widgets = wm8955_dapm_widgets, - .num_dapm_widgets = ARRAY_SIZE(wm8955_dapm_widgets), - .dapm_routes = wm8955_dapm_routes, - .num_dapm_routes = ARRAY_SIZE(wm8955_dapm_routes), - }, +static const struct snd_soc_component_driver soc_component_dev_wm8955 = { + .probe = wm8955_probe, + .set_bias_level = wm8955_set_bias_level, + .controls = wm8955_snd_controls, + .num_controls = ARRAY_SIZE(wm8955_snd_controls), + .dapm_widgets = wm8955_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(wm8955_dapm_widgets), + .dapm_routes = wm8955_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(wm8955_dapm_routes), + .suspend_bias_off = 1, + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, };
static const struct regmap_config wm8955_regmap = { @@ -989,19 +990,12 @@ static int wm8955_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm8955);
- ret = snd_soc_register_codec(&i2c->dev, - &soc_codec_dev_wm8955, &wm8955_dai, 1); + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_wm8955, &wm8955_dai, 1);
return ret; }
-static int wm8955_i2c_remove(struct i2c_client *client) -{ - snd_soc_unregister_codec(&client->dev); - - return 0; -} - static const struct i2c_device_id wm8955_i2c_id[] = { { "wm8955", 0 }, { } @@ -1013,7 +1007,6 @@ static int wm8955_i2c_remove(struct i2c_client *client) .name = "wm8955", }, .probe = wm8955_i2c_probe, - .remove = wm8955_i2c_remove, .id_table = wm8955_i2c_id, };