From: Baojun Xu baojun.xu@ti.com
Wrong calibration data order cause sound too low in some device. Fix wrong calibrated data order, add calibration data converssion by get_unaligned_be32() after reading from UEFI.
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") Signed-off-by: Baojun Xu baojun.xu@ti.com
--- v2: - Change data type from int to __be32. v1: - Change copyright date, and add new maintainer. - Add unaligned.h included for get_unaligned_be32(). - In tas2781_apply_calib(), change data address transfer directly to get data by get_unaligned_be32(), and send address to device. --- sound/pci/hda/tas2781_hda_i2c.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 8a7fe48043d2..5a8193285f9f 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -2,10 +2,12 @@ // // TAS2781 HDA I2C driver // -// Copyright 2023 Texas Instruments, Inc. +// Copyright 2023 - 2024 Texas Instruments, Inc. // // Author: Shenghao Ding shenghao-ding@ti.com +// Current maintainer: Baojun Xu baojun.xu@ti.com
+#include <asm/unaligned.h> #include <linux/acpi.h> #include <linux/crc8.h> #include <linux/crc32.h> @@ -519,20 +521,22 @@ static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) static const unsigned char rgno_array[CALIB_MAX] = { 0x74, 0x0c, 0x14, 0x70, 0x7c, }; - unsigned char *data; + int offset = 0; int i, j, rc; + __be32 data;
for (i = 0; i < tas_priv->ndev; i++) { - data = tas_priv->cali_data.data + - i * TASDEVICE_SPEAKER_CALIBRATION_SIZE; for (j = 0; j < CALIB_MAX; j++) { + data = get_unaligned_be32( + &tas_priv->cali_data.data[offset]); rc = tasdevice_dev_bulk_write(tas_priv, i, TASDEVICE_REG(0, page_array[j], rgno_array[j]), - &(data[4 * j]), 4); + (unsigned char *)&data, 4); if (rc < 0) dev_err(tas_priv->dev, "chn %d calib %d bulk_wr err = %d\n", i, j, rc); + offset += 4; } } }