From: ChiYuan Huang cy_huang@richtek.com
Pase the property to decide the TDM input source comes from 'DATA1' or 'DATA2 pin.
Signed-off-by: ChiYuan Huang cy_huang@richtek.com --- sound/soc/codecs/rtq9128.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rtq9128.c b/sound/soc/codecs/rtq9128.c index 926b79ed8078..371d622c6214 100644 --- a/sound/soc/codecs/rtq9128.c +++ b/sound/soc/codecs/rtq9128.c @@ -14,6 +14,7 @@ #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/regmap.h> #include <sound/pcm_params.h> #include <sound/soc.h> @@ -41,6 +42,7 @@
#define RTQ9128_CHSTAT_VAL_MASK GENMASK(1, 0) #define RTQ9128_DOLEN_MASK GENMASK(7, 6) +#define RTQ9128_TDMSRCIN_MASK GENMASK(5, 4) #define RTQ9128_AUDBIT_MASK GENMASK(5, 4) #define RTQ9128_AUDFMT_MASK GENMASK(3, 0) #define RTQ9128_MSMUTE_MASK BIT(0) @@ -59,6 +61,7 @@ struct rtq9128_data { struct gpio_desc *enable; int tdm_slots; int tdm_slot_width; + bool tdm_input_data2_select; };
struct rtq9128_init_reg { @@ -484,7 +487,7 @@ static int rtq9128_dai_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mas struct rtq9128_data *data = snd_soc_dai_get_drvdata(dai); struct snd_soc_component *comp = dai->component; struct device *dev = dai->dev; - unsigned int mask, start_loc; + unsigned int mask, start_loc, srcin_select; int i, frame_length, ret;
dev_dbg(dev, "%s: slot %d slot_width %d, tx/rx mask 0x%x 0x%x\n", __func__, slots, @@ -530,6 +533,14 @@ static int rtq9128_dai_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mas } }
+ srcin_select = data->tdm_input_data2_select ? RTQ9128_TDMSRCIN_MASK : 0; + ret = snd_soc_component_update_bits(comp, RTQ9128_REG_SDO_SEL, RTQ9128_TDMSRCIN_MASK, + srcin_select); + if (ret < 0) { + dev_err(dev, "Failed to configure TDM source input select\n"); + return ret; + } + data->tdm_slots = slots; data->tdm_slot_width = slot_width;
@@ -672,6 +683,9 @@ static int rtq9128_probe(struct i2c_client *i2c) else if (data->enable) usleep_range(10000, 11000);
+ data->tdm_input_data2_select = device_property_read_bool(dev, + "richtek,tdm-input-data2-select"); + i2c_set_clientdata(i2c, data);
/*