On Tue, Oct 12, 2021 at 09:35:16AM +0200, Takashi Iwai wrote:
On Mon, 11 Oct 2021 19:23:05 +0200, Greg Kroah-Hartman wrote:
On Mon, Oct 11, 2021 at 06:07:01PM +0200, Takashi Iwai wrote:
Could you also post the contents of /proc/asound/card*/usbmixer (only for the corresponding device), too?
Sure, here it is:
USB Mixer: usb_id=0x30be0101, ctrlif=0, ctlerr=0 Card: Schiit Audio Schiit Hel at usb-0000:47:00.1-2.2, high speed Unit: 5 Control: name="Mic - Input Jack", index=0 Info: id=5, control=2, cmask=0x0, channels=1, type="BOOLEAN" Volume: min=0, max=1, dBmin=0, dBmax=0 Unit: 7 Control: name="Speaker - Output Jack", index=0 Info: id=7, control=2, cmask=0x0, channels=1, type="BOOLEAN" Volume: min=0, max=1, dBmin=0, dBmax=0 Unit: 13 Control: name="PCM Playback Switch", index=0 Info: id=13, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN" Volume: min=0, max=1, dBmin=0, dBmax=0 Unit: 17 Control: name="Mic Capture Switch", index=0 Info: id=17, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN" Volume: min=0, max=1, dBmin=0, dBmax=0 Unit: 18 Control: name="Clock Source 18 Validity", index=0 Info: id=18, control=2, cmask=0x0, channels=1, type="BOOLEAN" Volume: min=0, max=1, dBmin=0, dBmax=0 Unit: 22 Control: name="Clock Source 22 Validity", index=0 Info: id=22, control=2, cmask=0x0, channels=1, type="BOOLEAN" Volume: min=0, max=1, dBmin=0, dBmax=0
Hm, I expected more exotic control that failed, but it was Mic Capture Switch, which should be treated normally.
Could you try the patch below? This will still show other warning messages, but it'll forcibly initialize the mixer elements at probe time, and the rest should work.
Once after it's confirmed to work, we may shut up the device warnings with a quirk.
Only one warning message shows up, here's the dmesg with this patch applied:
[Oct12 14:39] usb 7-2.2: new high-speed USB device number 10 using xhci_hcd [ +0.123157] usb 7-2.2: New USB device found, idVendor=30be, idProduct=0101, bcdDevice= 1.02 [ +0.000009] usb 7-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000003] usb 7-2.2: Product: Schiit Hel [ +0.000002] usb 7-2.2: Manufacturer: Schiit Audio [ +0.339785] usb 7-2.2: 17:0: failed to get current value for ch 0 (-32) [ +0.020373] input: Schiit Audio Schiit Hel as /devices/pci0000:40/0000:40:01.1/0000:41:00.0/0000:42:08.0/0000:47:00.1/usb7/7-2/7-2.2/7-2.2:1.3/0003:30BE:0101.000B/input/input24 [ +0.056868] hid-generic 0003:30BE:0101.000B: input,hidraw6: USB HID v1.00 Device [Schiit Audio Schiit Hel] on usb-0000:47:00.1-2.2/input3
I don't see a "mic capture switch" on this device, but maybe it triggers when I plug a mic into the microphone port, which is currently empty?
thanks,
greg k-h