Hello,
The following series will add support for OMAP4 DMIC interface, and enable them on sdp4430/Blaze boards.
Changes since v2: - Use module_platform_driver - convert to use devm_ - Add clk_id for the output clock - Extend the comment to explain why the driven can change the divider for 192KHz sampling rate.
Changes since v1: - 192KHz rate support fixed (need to use different divider) - Hold reference for dmic_fclk over the lifetime of the driver - Removed the clkdiv callback, and replaced with frequency based configuration for the external components (dmic frequency)
Regards, Peter --- Peter Ujfalusi (5): OMAP4: hwmod: Add names for DMIC memory address space ASoC: OMAP4: omap-dmic: Initial support for OMAP DMIC OMAP4: devices: Register OMAP4 DMIC platform device OMAP4: board-4430sdp: Register platform device for digimic codec ASoC: sdp4430: Add support for digital microphones
arch/arm/mach-omap2/board-4430sdp.c | 6 + arch/arm/mach-omap2/devices.c | 22 ++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 + sound/soc/omap/Kconfig | 5 + sound/soc/omap/Makefile | 2 + sound/soc/omap/omap-dmic.c | 511 ++++++++++++++++++++++++++++ sound/soc/omap/omap-dmic.h | 69 ++++ sound/soc/omap/sdp4430.c | 85 ++++- 8 files changed, 691 insertions(+), 11 deletions(-) create mode 100644 sound/soc/omap/omap-dmic.c create mode 100644 sound/soc/omap/omap-dmic.h