Implement support for Lynxpoint and Wildcat Point AudioDSP. Catpt solution deprecates existing sound/soc/intel/haswell which is removed in the following series. This cover-letter is followed by 'Developer's deep dive' message schedding light on catpt's key concepts and areas addressed.
Due to high range of errors and desynchronization from recommendations set by Windows solution, re-write came as a lower-cost solution compared to refactoring /haswell/ with several series of patches.
Special thanks go to Marcin Barlik and Piotr Papierkowski for sharing their LPT/WPT AudioDSP architecture expertise as well as helping backtrack its historical background. My thanks go to Amadeusz Slawinski for reviews and improvements proposed on and off the internal list. Most of internal diff below is his contribution. Krzysztof Hejmowski helped me setup my own Xtensa environment and recompile LPT/WPT FW binary sources what sped up the development greatly.
This would not have been possible without help from these champions, especially considering how quickly the catpt was written: 2 weeks features, 3 weeks optimizations. Thank you.
Userspace-exposed members are compatible with what is exposed by deprecated solution as well as FW binary being re-used thus no harm is done. The only visible differences are: the newly added 'Loopback Mute' kcontrol and volume support extending to quad from stereo.
On top of fixing erros and design flows, catpt also adds module reload, dynamic SRAM memory allocation during PCM runtime and exposes missing userspace API: 'Loopback Mute' kcontrol, quad volume controls and sysfs fw-version entries. Event tracing is provided to easy solution debugging.
Following are not included in this update and are scheduled as later addition: - fw logging - module (library) support
Note: LPT power up/down sequences might get aligned with WPT once enough testing is done as capabilities are shared for both DSPs. Note #2: Both LPT and WPT power up/down sequences may get optimized in future updates as thanks to help from the Windows team, most of nuances behind why/what/when in regard to hw registers have been backtracked and reviewed again.
Link to developer's deep dive message: https://www.spinics.net/lists/alsa-devel/msg113563.html
Changes in v3: - fixed IRAM mask usage in lpt_dsp_power_up (dsp.c) - updated dbg message formatting in catpt_restore_fwimage as suggested by Andy - fixed alignment for struct catpt_ssp_device_format - catpt_set_ctlvol now verifies all-equal scenario based on all channels rather than just first two as requested by Amadeo - fixed SPDX for registers.h
Changes in v2: - fixed SPDX formatting for all header files as well as pcm.c - fixed size used when memcping fs.c::fw_build_read as reported by Mark - renamed struct catpt_pdata to struct catpt_spec (cosmetic) - fixed erroneous path in catpt_load_block: region is properly released - trace.h events for updating registers have been removed and usages replaced by dev_dbg (SRAMPGE/ LPCS)
- as requested by Andy, struct resource has replaced struct catpt_mbank and struct catpt_mregion. This change cascaded into:
- catpt_mbank_size and catpt_mregion_size replaced by resource_size - catpt_mregion_intersects replaced by resource_overlaps - all catpt_mbank_ and catpt_mregion_ handlers found in loader.c (_request, _reserve, _release, _extract, _split, _join) have been removed - __request_region and __release_region have been enlisted in their place - catpt_mregion_intersecting renamed to catpt_resource_overlapping - catpt_request_region helper has been provided to deal with -size based requests o haven't found direct replacements in resource.c/ ioport.h for both functions
- catpt_mbank_create and catpt_mbank_remove renamed to catpt_sram_init and catpt_sram_free respectively - catpt_sram_init now returns void instead of int and has been converted to simple initialized. This change ultimately cascaded into: o both SRAM banks initialization being moved to catpt_dev_init from catpt_acpi_probe (device.c) o catpt_dev::spec is now initialized first, with catpt_dev_init following it soon after o catpt_acpi_probe erroneous path has been simplified as SRAM banks no longer need to be freed
- catpt_sram_free now frees all resources via child -> sibling enumeration rather than region_list iteration - catpt_dsp_update_srampge and catpt_dsp_set_srampge now accept new argument: unsigned long mask. Caused by removal of catpt_mbank - mask is taken directly from catpt_dev::spec::d/iram_mask - trace.h events for catpt_mbank and catpt_mregion have been removed
Diff against last drop on internal list: - replaced spinlock with mutex for mregion allocation and release to address sleeping in atomic context warnings - fixed coredump fw_hash dumping - kcontrol values are now always stored regardless of stream of interest is running or not - kcontrol values are now applied after stream is prepared instead of ignoring what has been set by user initially - catpt_pdata instances have been renamed from hsw_ and bdw_ to lpt_ and wpt_ respectively - reordered Makefile .o(s) (cosmetic)
Cezary Rojewski (13): ASoC: Intel: Add catpt device ASoC: Intel: catpt: Define DSP operations ASoC: Intel: catpt: Firmware loading and context restore ASoC: Intel: catpt: Implement IPC protocol ASoC: Intel: catpt: Add IPC messages ASoC: Intel: catpt: PCM operations ASoC: Intel: catpt: Event tracing ASoC: Intel: catpt: Simple sysfs attributes ASoC: Intel: Select catpt and deprecate haswell ASoC: Intel: haswell: Remove haswell-solution specific code ASoC: Intel: broadwell: Remove haswell-solution specific code ASoC: Intel: bdw-5650: Remove haswell-solution specific code ASoC: Intel: bdw-5677: Remove haswell-solution specific code
sound/soc/intel/Kconfig | 22 +- sound/soc/intel/Makefile | 2 +- sound/soc/intel/boards/Kconfig | 8 +- sound/soc/intel/boards/bdw-rt5650.c | 36 - sound/soc/intel/boards/bdw-rt5677.c | 33 - sound/soc/intel/boards/broadwell.c | 33 - sound/soc/intel/boards/haswell.c | 28 +- sound/soc/intel/catpt/Makefile | 6 + sound/soc/intel/catpt/core.h | 187 +++++ sound/soc/intel/catpt/device.c | 376 +++++++++ sound/soc/intel/catpt/dsp.c | 596 +++++++++++++ sound/soc/intel/catpt/fs.c | 79 ++ sound/soc/intel/catpt/ipc.c | 298 +++++++ sound/soc/intel/catpt/loader.c | 673 +++++++++++++++ sound/soc/intel/catpt/messages.c | 312 +++++++ sound/soc/intel/catpt/messages.h | 401 +++++++++ sound/soc/intel/catpt/pcm.c | 1198 +++++++++++++++++++++++++++ sound/soc/intel/catpt/registers.h | 191 +++++ sound/soc/intel/catpt/trace.h | 83 ++ 19 files changed, 4420 insertions(+), 142 deletions(-) create mode 100644 sound/soc/intel/catpt/Makefile create mode 100644 sound/soc/intel/catpt/core.h create mode 100644 sound/soc/intel/catpt/device.c create mode 100644 sound/soc/intel/catpt/dsp.c create mode 100644 sound/soc/intel/catpt/fs.c create mode 100644 sound/soc/intel/catpt/ipc.c create mode 100644 sound/soc/intel/catpt/loader.c create mode 100644 sound/soc/intel/catpt/messages.c create mode 100644 sound/soc/intel/catpt/messages.h create mode 100644 sound/soc/intel/catpt/pcm.c create mode 100644 sound/soc/intel/catpt/registers.h create mode 100644 sound/soc/intel/catpt/trace.h