On Thu, Oct 28, 2010 at 9:18 AM, Nori, Sekhar nsekhar@ti.com wrote:
On Thu, Oct 28, 2010 at 19:34:10, Nori, Sekhar wrote:
Hi Victor,
Sorry for jumping late on this. Some comments below:
On Tue, Oct 19, 2010 at 23:36:19, vm.rod25@gmail.com wrote:
From: Victor Rodriguez victor.rodriguez@sasken.com
This patch adds EMAC support for the Hawkboard-L138 system
Signed-off-by: Victor Rodriguez victor.rodriguez@sasken.com
arch/arm/mach-davinci/board-omapl138-hawk.c | 47 +++++++++++++++++++++++++++ 1 files changed, 47 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index c472dd8..8633245 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -19,6 +19,51 @@
#include <mach/cp_intc.h> #include <mach/da8xx.h> +#include <mach/mux.h>
+#define HAWKBOARD_PHY_ID "0:07"
+static short omapl138_hawk_mii_pins[] __initdata = {
- DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
- DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
- DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
- DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
- DA850_MDIO_D,
- -1
-1 need not be a new line. In any case, please include a ',' after it.
The justification for a ',' in the end is that it makes it easier to add new initialization elements. Since -1 is going to be the last one anyway, please ignore this comment.
Thanks, Sekhar
Ok so let me see if I understand The only change that I should do is to remove
if (!machine_is_omapl138_hawkboard())return;
right ?
Regards
Victor