Hi,
I am trying to get audio working on PIPO W6 tablet. I was following this thread [1] in my efforts to get audio working. Initially i was not getting any interrupts. I changed the interrupt order as described in the thread and was able to get interrupts and successfully load the firmware. I also ran the amixer commands described in [2]. Now I am just getting a clicking sound whenever something plays.
Pierre-Louis said something about playing with the DAI links and swapping the codec connections here [3]. Can anybody explain to me how its done ? I tried to enable other switches in alsamixer using the below commands but nothing worked.
amixer -c0 sset 'codec_out1 mix 0 pcm0_in' on
I mailed the manufacturer asking for the schematics of the audio chip and the android source code for this device but got no response.
I also tried the ssp0 firmware but i got no sound instead of the clicking sound i was getting with the default firmware.
I have the exact problem as the guy in this thread. [4]
Thanks, Bharath
[1] http://thread.gmane.org/gmane.linux.alsa.devel/134554 [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2015-June/0940 80.html [3] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-March/106 262.html [4] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-March/106 178.html