Hi,
I just change dev_err() to dev_info() in arizona-core.
root@localhost:~# aplay test.wav [ 42.731358] arizona spi1.0: Leaving AoD mode .... [ 42.823514] s3c64xx_spi_runtime_resume [ 42.828270] arizona spi1.0: ASRC underclocked [ 42.828281] s3c64xx_spi_runtime_suspend .... -> suspend () [ 72.398152] arizona spi1.0: Suspend, disabling IRQ [ 72.410471] s3c64xx_spi_runtime_resume [ 72.429045] s3c64xx_spi_suspend -> spi suspended [ 72.429905] PM: suspend of devices complete after 67.309 msecs [ 72.440084] arizona spi1.0: Late suspend, reenabling IRQ -> try to access spi irq after spi suspend() [ 72.440165] arizona spi1.0: Failed to read IRQ status: -108 [ 72.440174] arizona spi1.0: Failed to read main IRQ status: -108 [ 72.440242] arizona spi1.0: Failed to read IRQ status: -108 [ 72.440249] arizona spi1.0: Failed to read main IRQ status: -108 [ 72.440275] arizona spi1.0: Failed to read IRQ status: -108 [ 72.440282] arizona spi1.0: Failed to read main IRQ status: -108 [ 72.440304] arizona spi1.0: Failed to read IRQ status: -108 .... [ 72.465525] s3c64xx_spi_resume [ 72.650760] arizona spi1.0: Late resume, reenabling IRQ [ 72.650819] [<ffffffc000089f8c>] dump_backtrace+0x0/0x12c [ 72.650824] [<ffffffc00008a0c8>] show_stack+0x10/0x1c [ 72.650832] [<ffffffc0009f1398>] dump_stack+0x78/0xc8 [ 72.650838] [<ffffffc00009ade8>] warn_slowpath_common+0x98/0xd0 [ 72.650842] [<ffffffc00009ae6c>] warn_slowpath_fmt+0x4c/0x58 [ 72.650847] [<ffffffc0000e7f1c>] __enable_irq+0x40/0x8c [ 72.650851] [<ffffffc0000e7f9c>] enable_irq+0x34/0x74 [ 72.650858] [<ffffffc0004d013c>] arizona_resume+0x24/0x38 [ 72.650865] [<ffffffc0004b6bac>] dpm_run_callback+0x50/0x1a0 [ 72.650870] [<ffffffc0004b728c>] device_resume+0x90/0x268 [ 72.650874] [<ffffffc0004b88cc>] dpm_resume+0x120/0x350 [ 72.650878] [<ffffffc0004b8f1c>] dpm_resume_end+0x10/0x28 [ 72.650884] [<ffffffc0000e1bec>] suspend_devices_and_enter+0x138/0x7f4 [ 72.650887] [<ffffffc0000e25bc>] pm_suspend+0x314/0x5bc [ 72.650893] [<ffffffc0000e0bc8>] state_store+0x7c/0xf0 [ 72.650901] [<ffffffc00035ee58>] kobj_attr_store+0x10/0x24 [ 72.650910] [<ffffffc00020e1e0>] sysfs_kf_write+0x40/0x4c [ 72.650914] [<ffffffc00020d664>] kernfs_fop_write+0xb8/0x180 [ 72.650922] [<ffffffc0001a2ef4>] __vfs_write+0x2c/0x11c [ 72.650926] [<ffffffc0001a38f0>] vfs_write+0x90/0x170 [ 72.650931] [<ffffffc0001a422c>] SyS_write+0x40/0xa0 -----
This irq failed errors are occured in enable_irq() that in arizona_suspend_late(). Becase of access the irq after spi suspend. (arizona->irq == spi->irq)
Best Regards, Inha Song.
On Thu, 17 Sep 2015 10:16:32 +0100 Charles Keepax ckeepax@opensource.wolfsonmicro.com wrote:
OK so this is definitely that the SPI driver hasn't resumed yet. Could we also get DEBUG turned on in arizona-core here. I am interested to check where in the process the arizona suspend/resume ops are being called.
Thanks, Charles