Some systems may require a different resistor than the default one (4K). This adds a property in sgtl5000 codec. It keeps the default of 4K when nothing is specified so it does not break existing code.
Signed-off-by: Jean-Michel Hautbois jean-michel.hautbois@vodalys.com --- .../devicetree/bindings/sound/sgtl5000.txt | 8 ++++ sound/soc/codecs/sgtl5000.c | 55 ++++++++++++++++++++-- 2 files changed, 59 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 955df60..d6ec927 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -7,10 +7,18 @@ Required properties:
- clocks : the clock provider of SYS_MCLK
+- micbias-resistor-k-ohms : the bias resistor to be used in kOmhs + The resistor can take values of 2k, 4k or 8k. + If set to 0 it will be off. + If this node is not mentioned or if the value is unknown, then + micbias resistor is set to 4K. + + Example:
codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 150>; + sgtl5000-micbias-resistor = <1>; }; diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 6bb77d7..f0b40a6 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -16,6 +16,7 @@ #include <linux/pm.h> #include <linux/i2c.h> #include <linux/clk.h> +#include <linux/log2.h> #include <linux/regmap.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> @@ -121,6 +122,13 @@ struct ldo_regulator { bool enabled; };
+enum sgtl5000_micbias_resistor { + SGTL5000_MICBIAS_OFF = 0, + SGTL5000_MICBIAS_2K = 2, + SGTL5000_MICBIAS_4K = 4, + SGTL5000_MICBIAS_8K = 8, +}; + /* sgtl5000 private structure in codec */ struct sgtl5000_priv { int sysclk; /* sysclk rate */ @@ -131,6 +139,7 @@ struct sgtl5000_priv { struct regmap *regmap; struct clk *mclk; int revision; + u8 micbias_resistor; };
/* @@ -145,12 +154,14 @@ struct sgtl5000_priv { static int mic_bias_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(w->codec); + switch (event) { case SND_SOC_DAPM_POST_PMU: - /* change mic bias resistor to 4Kohm */ + /* change mic bias resistor */ snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL, - SGTL5000_BIAS_R_MASK, - SGTL5000_BIAS_R_4k << SGTL5000_BIAS_R_SHIFT); + SGTL5000_BIAS_R_MASK, + sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT); break;
case SND_SOC_DAPM_PRE_PMD: @@ -1326,7 +1337,9 @@ static int sgtl5000_probe(struct snd_soc_codec *codec) SGTL5000_HP_ZCD_EN | SGTL5000_ADC_ZCD_EN);
- snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 2); + snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL, + SGTL5000_BIAS_R_MASK, + sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT);
/* * disable DAP @@ -1418,6 +1431,8 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, struct sgtl5000_priv *sgtl5000; int ret, reg, rev; unsigned int mclk; + struct device_node *np = client->dev.of_node; + u32 value;
sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv), GFP_KERNEL); @@ -1470,6 +1485,38 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, dev_info(&client->dev, "sgtl5000 revision 0x%x\n", rev); sgtl5000->revision = rev;
+ if (np) { + if (!of_property_read_u32(np, + "micbias-resistor-k-ohms", &value)) { + switch (value) { + case SGTL5000_MICBIAS_OFF: + sgtl5000->micbias_resistor = 0; + break; + case SGTL5000_MICBIAS_2K: + sgtl5000->micbias_resistor = 1; + break; + case SGTL5000_MICBIAS_2K: + sgtl5000->micbias_resistor = 2; + break; + case SGTL5000_MICBIAS_2K: + sgtl5000->micbias_resistor = 3; + break; + default: + sgtl5000->micbias_resistor = 2; + dev_err(&client->dev, + "Unsuitable MicBias resistor\n"); + } + } else { + /* default is 4Kohms */ + sgtl5000->micbias_resistor = 2; + } + dev_err(&client->dev, + "Unsuitable MicBias resistor\n"); + } + } else { + } + } + i2c_set_clientdata(client, sgtl5000);
/* Ensure sgtl5000 will start with sane register values */