On Thu, 29 Dec 2016 09:23:47 +0100, Bard Liao wrote:
Some project use external circuit to prevent the headset ground noise. It will need to use GPIO to control it. Dell Wyse 3040 is the only project that has the external circuit so far and it uses GPIO2 for that. This patch provide the support fot it.
Signed-off-by: Bard Liao bardliao@realtek.com
Tested-by: Takashi Iwai tiwai@suse.de Reviewed-by: Takashi Iwai tiwai@suse.de
thanks,
Takashi
include/sound/rt5670.h | 7 +++++ sound/soc/codecs/rt5670.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 80 insertions(+), 1 deletion(-)
diff --git a/include/sound/rt5670.h b/include/sound/rt5670.h index b7d6051..0b445b0 100644 --- a/include/sound/rt5670.h +++ b/include/sound/rt5670.h @@ -11,12 +11,19 @@ #ifndef __LINUX_SND_RT5670_H #define __LINUX_SND_RT5670_H
+enum rt5670_gpios {
- RT5670_GPIO_NONE = 0,
- RT5670_GPIO2,
+};
struct rt5670_platform_data { int jd_mode; bool in2_diff; bool dev_gpio;
bool dmic_en;
- enum rt5670_gpios hs_ground_control_gpio; unsigned int dmic1_data_pin; /* 0 = GPIO6; 1 = IN2P; 3 = GPIO7*/ unsigned int dmic2_data_pin;
diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index 97bafac..1d94cec 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -420,13 +420,15 @@ static int rt5670_headset_detect(struct snd_soc_codec *codec, int jack_insert) struct rt5670_priv *rt5670 = snd_soc_codec_get_drvdata(codec);
if (jack_insert) {
if (rt5670->pdata.hs_ground_control_gpio)snd_soc_dapm_force_enable_pin(dapm, "HS GND Control");- snd_soc_dapm_force_enable_pin(dapm, "Mic Det Power"); snd_soc_dapm_sync(dapm); snd_soc_update_bits(codec, RT5670_GEN_CTRL3, 0x4, 0x0); snd_soc_update_bits(codec, RT5670_CJ_CTRL2, RT5670_CBJ_DET_MODE | RT5670_CBJ_MN_JD, RT5670_CBJ_MN_JD);
snd_soc_write(codec, RT5670_GPIO_CTRL2, 0x0004);@@ -450,6 +452,10 @@ static int rt5670_headset_detect(struct snd_soc_codec *codec, int jack_insert) snd_soc_dapm_disable_pin(dapm, "Mic Det Power"); snd_soc_dapm_sync(dapm); }
if (rt5670->pdata.hs_ground_control_gpio) {snd_soc_dapm_disable_pin(dapm, "HS GND Control");snd_soc_dapm_sync(dapm);}@@ -1542,6 +1548,29 @@ static int rt5670_bst2_event(struct snd_soc_dapm_widget *w, return 0; }
+static int rt5670_hs_ground_control_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
+{
- struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
- switch (event) {
- case SND_SOC_DAPM_PRE_PMU:
snd_soc_update_bits(codec, RT5670_GPIO_CTRL2,RT5670_GP2_OUT_MASK, RT5670_GP2_OUT_HI);break;- case SND_SOC_DAPM_POST_PMD:
snd_soc_update_bits(codec, RT5670_GPIO_CTRL2,RT5670_GP2_OUT_MASK, RT5670_GP2_OUT_LO);break;- default:
return 0;- }
- return 0;
+}
static const struct snd_soc_dapm_widget rt5670_dapm_widgets[] = { SND_SOC_DAPM_SUPPLY("PLL1", RT5670_PWR_ANLG2, RT5670_PWR_PLL_BIT, 0, NULL, 0), @@ -1917,6 +1946,12 @@ static int rt5670_bst2_event(struct snd_soc_dapm_widget *w, SND_SOC_DAPM_OUTPUT("SPORN"), };
+static const struct snd_soc_dapm_widget hs_gnd_cnotrol_widgets[] = {
- SND_SOC_DAPM_SUPPLY("HS GND Control", SND_SOC_NOPM, 0, 0,
rt5670_hs_ground_control_event,SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),+};
static const struct snd_soc_dapm_route rt5670_dapm_routes[] = { { "ADC Stereo1 Filter", NULL, "ADC STO1 ASRC", is_using_asrc }, { "ADC Stereo2 Filter", NULL, "ADC STO2 ASRC", is_using_asrc }, @@ -2314,6 +2349,11 @@ static int rt5670_bst2_event(struct snd_soc_dapm_widget *w, { "SPORN", NULL, "SPO Amp" }, };
+static const struct snd_soc_dapm_route hs_gnd_cnotrol_routes[] = {
- { "BST1", NULL, "HS GND Control" },
- { "HP Amp", NULL, "HS GND Control" },
+};
static int rt5670_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { @@ -2679,6 +2719,13 @@ static int rt5670_probe(struct snd_soc_codec *codec) "The driver is for RT5670 RT5671 or RT5672 only\n"); return -ENODEV; }
if (rt5670->pdata.hs_ground_control_gpio) {
snd_soc_dapm_new_controls(dapm, hs_gnd_cnotrol_widgets,ARRAY_SIZE(hs_gnd_cnotrol_widgets));snd_soc_dapm_add_routes(dapm, hs_gnd_cnotrol_routes,ARRAY_SIZE(hs_gnd_cnotrol_routes));}
rt5670->codec = codec;
return 0;
@@ -2827,6 +2874,10 @@ static int rt5670_resume(struct snd_soc_codec *codec) DMI_MATCH(DMI_BOARD_NAME, "Braswell CRB"), }, },
- {}
+};
+static const struct dmi_system_id dmi_platform_dell_wyse[] = { { .ident = "Dell Wyse 3040", .matches = { @@ -2861,6 +2912,12 @@ static int rt5670_i2c_probe(struct i2c_client *i2c, rt5670->pdata.dmic1_data_pin = RT5670_DMIC_DATA_IN2P; rt5670->pdata.dev_gpio = true; rt5670->pdata.jd_mode = 1;
rt5670->pdata.hs_ground_control_gpio = RT5670_GPIO_NONE;} else if (dmi_check_system(dmi_platform_dell_wyse)) {
rt5670->pdata.dmic_en = false;rt5670->pdata.dev_gpio = true;rt5670->pdata.jd_mode = 1;rt5670->pdata.hs_ground_control_gpio = RT5670_GPIO2;}
rt5670->regmap = devm_regmap_init_i2c(i2c, &rt5670_regmap);
@@ -2886,6 +2943,21 @@ static int rt5670_i2c_probe(struct i2c_client *i2c,
regmap_write(rt5670->regmap, RT5670_RESET, 0);
- switch (rt5670->pdata.hs_ground_control_gpio) {
- case RT5670_GPIO_NONE:
break;- case RT5670_GPIO2:
regmap_update_bits(rt5670->regmap, RT5670_GPIO_CTRL2,RT5670_GP2_PF_MASK | RT5670_GP2_OUT_MASK,RT5670_GP2_PF_OUT | RT5670_GP2_OUT_LO);break;- default:
rt5670->pdata.hs_ground_control_gpio =RT5670_GPIO_NONE;dev_warn(&i2c->dev, "Only Support GPIO2 currently\n");break;- }
- regmap_read(rt5670->regmap, RT5670_VENDOR_ID, &val); if (val >= 4) regmap_write(rt5670->regmap, RT5670_GPIO_CTRL3, 0x0980);
-- 1.8.1.1.439.g50a6b54