From: Chris Morgan macromorgan@hotmail.com
Add the new rk817 codec driver to the Odroid Go Advance.
Tested-by: Maciej Matuszczyk maccraft123mc@gmail.com Signed-off-by: Chris Morgan macromorgan@hotmail.com --- Changes in v9: - Add cover letter. - Remove documentation for interrupt parent per Rob Herring's request. - Remove unused MODULE_DEVICE_TABLE to fix a bug identified by kernel test robot. Changes in v8: - Added additional documentation for missing properties of #sound-dai-cells, interrupt-parent, and wakeup-source for mfd documentation. - Corrected order of elements descriptions in device tree documentation. - Changed name of "mic-in-differential" to "rockchip,mic-in-differential". - Changed name of sound card from "rockchip,rk817-codec" to "Analog". - Removed unused resets and reset-names from the i2s1_2ch node. Changes in v7: - Removed ifdef around register definitions for MFD. - Replaced codec documentation with updates to MFD documentation. - Reordered elements in example to comply with upstream rules. - Added binding update back for Odroid Go Advance as requested. - Submitting patches from gmail now. Changes in v6: - Included additional project maintainers for correct subsystems. - Removed unneeded compatible from DT documentation. - Removed binding update for Odroid Go Advance (will do in seperate series). Changes in v5: - Move register definitions from rk817_codec.h to main rk808.h register definitions. - Add volatile register for codec bits. - Add default values for codec bits. - Removed of_compatible from mtd driver (not necessary). - Switched to using parent regmap instead of private regmap for codec. Changes in v4: - Created set_pll() call. - Created user visible gain control in mic. - Check for return value of clk_prepare_enable(). - Removed duplicate clk_prepare_enable(). - Split DT documentation to separate commit. Changes in v3: - Use DAPM macros to set audio path. - Updated devicetree binding (as every rk817 has this codec chip). - Changed documentation to yaml format. - Split MFD changes to separate commit. Changes in v2: - Fixed audio path registers to solve some bugs.
.../boot/dts/rockchip/rk3326-odroid-go2.dts | 36 +++++++++++++++++-- 1 file changed, 34 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 49c97f76df77..e8c2b5a817a7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -165,6 +165,31 @@ blue_led: led-0 { }; };
+ rk817-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Analog"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Speaker"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Speaker", "SPKO"; + simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_2ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + }; + vccsys: vccsys { compatible = "regulator-fixed"; regulator-name = "vcc3v8_sys"; @@ -269,11 +294,14 @@ rk817: pmic@20 { reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "xin32k"; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S1_OUT>; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; wakeup-source; #clock-cells = <1>; - clock-output-names = "rk808-clkout1", "xin32k"; + #sound-dai-cells = <0>;
vcc1-supply = <&vccsys>; vcc2-supply = <&vccsys>; @@ -432,6 +460,10 @@ regulator-state-mem { }; }; }; + + rk817_codec: codec { + rockchip,mic-in-differential; + }; }; };