At Tue, 20 May 2014 15:15:49 +0800, Kailang wrote:
Hi Takashi,
HP machine had pop noise via speaker. If EAPD on or off, speaker will have pop noise. So, they want to set eapd to follow with stream on or off.
I can apply this as is, but still I wonder whether this results in other problems. Doing EAPD on/off there means that it happens far more often. For example, what happens if you do like below?
while true; do echo -n > /dev/snd/pcmC0D0p doneAnd, what if the device is resumed from power-saving by an audio playback? Immediately after the power up, it'll start the streaming, so it'll turn on EAPD.
That said, isn't it just a need for some delay before EAPD on/off?
No, eapd on or off will cause pop noise. Our customer just want to do eapd on when stream is open. The pop noise will not clear. Because music gain was biger than pop noise.
thanks,
Takashi
Many Thanks.
BR, Kailang [2 0000-set-eapd-follow-stream-on-off.patch <application/octet-stream (quoted-printable)>]
------Please consider the environment before printing this e-mail.