2012/3/9, David Henningsson david.henningsson@canonical.com:
On 03/08/2012 04:27 PM, Takashi Iwai wrote:
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 9771b07..f450f2a 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -82,6 +82,7 @@ struct ad198x_spec { unsigned int inv_jack_detect: 1;/* inverted jack-detection */ unsigned int inv_eapd: 1; /* inverted EAPD implementation */ unsigned int analog_beep: 1; /* analog beep input present */
unsigned int avoid_init_slave_vol:1;
#ifdef CONFIG_SND_HDA_POWER_SAVE struct hda_loopback_check loopback;
@@ -223,11 +224,12 @@ static int ad198x_build_controls(struct hda_codec *codec) unsigned int vmaster_tlv[4]; snd_hda_set_vmaster_tlv(codec, spec->vmaster_nid, HDA_OUTPUT, vmaster_tlv);
err = snd_hda_add_vmaster(codec, "Master Playback Volume",
err = __snd_hda_add_vmaster(codec, "Master Playback Volume", vmaster_tlv, (spec->slave_vols ? spec->slave_vols : ad_slave_pfxs),
"Playback Volume");
"Playback Volume",!spec->avoid_init_slave_vol);@@ -3604,6 +3606,7 @@ static int patch_ad1884(struct hda_codec *codec) spec->vmaster_nid = 0x04; /* we need to cover all playback volumes */ spec->slave_vols = ad1884_slave_vols;
spec->avoid_init_slave_vol = 1;
codec->patch_ops = ad198x_patch_ops;
https://bugs.launchpad.net/alsa-driver/+bug/526201
https://bugzilla.novell.com/show_bug.cgi?id=595544
Some HP desktops seem have internal speaker connected to mono port
, line out at rear panel and HP at front panel
Node 0x11 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000001f: OUT HP Detect Trigger ImpSense Pin Default 0x02211030: [Jack] HP Out at Ext Front Conn = 1/8, Color = Black DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=00, enabled=0 Connection: 1 0x07 Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001001f: OUT HP EAPD Detect Trigger ImpSense EAPD 0x0: Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=00, enabled=0 Power states: D0 D3 Power: setting=D0, actual=D0 Connection: 1 0x0a Node 0x13 [Pin Complex] wcaps 0x40050c: Mono Amp-Out Control: name="Mono Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Mono Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x00] Pincap 0x00010010: OUT EAPD EAPD 0x0: Pin Default 0x99131150: [Fixed] Speaker at Int ATAPI Conn = ATAPI, Color = Black DefAssociation = 0x5, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D3 Power: setting=D0, actual=D0 Connection: 1 0x1f
DAC0 is not used and there is amp at node 0x13 dB range of volume control node 0x13 is different from node 0x03 and 0x04
Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 Power states: D0 D3 Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out Control: name="PCM Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="AD198x Analog", type="Audio", device=0 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x1a 0x1a] Converter: stream=0, channel=0 Power states: D0 D3 Power: setting=D0, actual=D0